Question about Honda Passport

1 Answer

1999 honda passport 3.2 has the ck engine light on the code came up p1441 that was the only one how do i fix this

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

The code p1441 = EVAP ( evaporative) system flow during no purge. This could be caused by a simple defective gas cap. Another cause could be the EVAP solenoid valve is stuck open. Your PCM (engine computer) is always monitoring the pressure in the EVAP system, as well as voltage values that are programmed and expected to fall within a certain range. When an emission component failure or leak is detected, you will receive this code to alert you that there is a problem. The best case senario would be the previously mentioned, the worst case senario will require the EVAP system to under go a smoke test, that an average home tech does not have the equipment to conduct.

The PCM detected the EVAP Purge Switch indicated 12v (open circuit) at least 4 out of the last 8 times the ignition switch was turned "on".

The EVAP looks like this and would be mounted on or near your Emission Canister that is round in shape with several hose's running to it.

1999 honda passport 3.2 has - 69200ff.jpg

Posted on Jul 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset check engine light 1999 honda passport?


Repair the problem, then reset the error with an OBDII scan tool.

Aug 12, 2014 | 1999 Honda Passport

1 Answer

I have a 1995 gmc jimmy. After service light came on, I had codes read. I had a smoke test done, lines were bad. I replaced them, had code cleared and light is back on!! Code is p1441. Any ideas or su


P1441 CHEVROLET Description The Engine Control Module (ECM) has detected vacuum flow to the Fuel Tank Pressure (FTP) sensor during a system sealed condition. Possible causes are a faulty canister purge solenoid or a faulty tank pressure sensor.

Read more: http://engine-codes.com/p1441_chevrolet.html#ixzz21ZntUMpS

Jul 24, 2012 | 1995 GMC Jimmy

1 Answer

How to fix code p1441 chevrolet venture 1999


dont worry about it its an EVAP code and will not affect your engine perfformance

Nov 04, 2010 | 1999 Chevrolet Venture

1 Answer

(1999 Honda Passport) I have a knock in my engine, it is getting to be very loud and I have been told I have a lifter out. I bought the car about a month ago from a family friend who didn't need it...


Dude.. Your looking at needing a new engine. There are no lifters in a dual overhead cam engine. There are only rockers. If you have a "kncok" its more than likely a rod. That means new engine.

If you killed the engine by not adding oil, fixing the rod now is not an option. You have damaged all of the rod and main bearings. Its only a matter of time before the others fail as well.

Oct 17, 2010 | 1999 Honda Passport

1 Answer

Evaporative emissions leak for 2000 honda Passport


if small leak indicated it is most likely a gas cap

Nov 10, 2009 | 1999 Honda Passport

1 Answer

1999 Honda Passport idle problem-no check engine light on


TRY SPRAYING BRAKE CLEAN AROUND THE INTAKE ALONG THE VALVE COVERS IF THE IDLE CHANGES YOU HAVE BAD INTAKE GASKETS ALSO LOOK AT THE FUEL PRESSURE REGULTOR PULL THE HOSE OFF IF THERE IS GAS IN THE HOSE THEN YOU HAVE A BAD REGULATOR

Nov 17, 2008 | 1999 Honda Passport

1 Answer

Check engine light on;


Go to any auto zone or kragen auto they will test the system for free, you can also buy a simple to use code reader from them for around $40

Oct 17, 2008 | 1999 Honda Passport

1 Answer

2000 Honda (Isuzu Rodeo) Check Engine Light ? 4 Codes, Misfire/Throttle/EVAP ?


Hi Jack,

I am not an expert and I don't have the codes in front of me with the meaning but I can offer some advice and hopefully it will solve your problem. First keep the print out of the codes and take it/them with you. Have someone check the oxygen sensor. It's possible that all of the codes you are getting lead up to the computer (electrical issue). I sure hope this helps. Good luck and let me know how things turn out.

Oct 17, 2008 | 2000 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...