Question about 2001 Chevrolet Camaro

1 Answer

Changing a front turn signal bulb on a 2001 camaro

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

General Motors is makign so hard this tasks, but not impossible; You can only get to the light through an access panel located in the shroud under the front bumper. Because the car sits so low to the ground, this requires you to jack the car up (always use jack stands), and then remove the two screws on the access panel and fold it out of the way. You then have to reach up inside the bumper to the back of the light. Squeeze the tab on the side of the socket and twist the socket to remove it from the turn signal housing. The light bulb itself can then be pulled straight out of the socket without twisting.

changing a front turn signal bulb on a 2001 camaro - d0c71ae.jpg

Fig.: Picture is of a 93-97 Camaro, but it should be just about the same on 98-02 models, check #20 in this pic...

The way to do this is to remove the head lights. Its fast and easy (should take no more than 5-10 minutes):
1. Remove the bolt securing the head light assembly. The bolt is located on the upper black L-bracket/brace (1 bolt secures the bracket and head light assembly). It is located near the top center of the head light.
2. You will notice 2 tabs on the back of the head light assembly that helps hold it in place to the vehicle. Simply slide the head light towards the center of the vehicle, and its removed.
3. You now have easy access to the turn signal lights. The rest is very easy.....

Hope helps with this.

Posted on Jul 06, 2010

  • ZJ Limited
    ZJ Limited Jul 06, 2010

    Be sure to get the correct bulb. The correct turn signal bulb for 98 to
    02 cost more than another bulb which will fit. The difference is
    because the proper bulb is a long life bulb. The original front turn
    signal bulb also serves as the daytime driving light. With the hassle
    of changing bulbs it's definitely worth the extra price not to have
    change a bulb any sooner than necessary...



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My right front turn signal on my 2001 ford ranger doesnt work and my inside right turn signal light on dash doesnt work and flashes really fast. Buld on right side was replaced and works when lights

was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

Dec 06, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

Change turn signal light bulb

Did you change the bulb or want to change the bulb? Also, if you want to change the bulb is it the front or rear? Come on man, be a little more explanatory!

Apr 18, 2014 | 1985 Chevrolet Camaro

1 Answer

Turn signal not flashing on a 2001 camaro

If it is the front left, does the back left flash?
If it is the back left, does the front left flash?
If you swap the left front bulb with the right front bulb, does that bulb, in its new location, still not flash?
Replace the bulb.

Mar 16, 2014 | Cars & Trucks

1 Answer

How do i change the front turn signal bulb on a 2001 Chevy Camaro

The headlamp needs to be removed first. Then the bulb socket can be rotated and removed.

Aug 10, 2010 | 2001 Chevrolet Camaro

1 Answer

Front turn signal bulb change

There is a "trap door" underneath. Two bolts and it opens.

Jul 17, 2010 | 1999 Chevrolet Camaro

1 Answer

How do i access front turn signal light bulb on 2001 camaro

  1. Open the hood.
  2. Remove the headlamp housing bracket bolt from the headlamp bracket.
  3. Pull the headlamp inboard to disengage the headlamp tabs from the headlamp bracket slots.
  4. Pull the headlamp forward to access electrical connectors.
  5. Disconnect the electrical connectors from the headlamp.
  6. Remove the headlamp from the vehicle.
Remove the park and turn signal lamp sockets from the lamp by rotating counterclockwise.

Mar 09, 2010 | 2001 Chevrolet Camaro

1 Answer

Turn signals go out in front

moister or metal is shorting it out. Check all wires to see if they are grounding out and use dielectrical grease in the bulbs sockets to keep moister away from the contacts

Jan 24, 2010 | 2001 Chevrolet Camaro

1 Answer

Front turn signal replacement 2001 camaro- cannot get it to seal

take your skirting loose on the bottom side of the bumper and go in that way

Jun 21, 2009 | 2001 Chevrolet Camaro

1 Answer

How to change bulbs on front and rear turn signals

open the hatch there should be two screws that hold on the lense, twist the bulb holders and remove

Aug 08, 2008 | 2001 Jeep Cherokee

Not finding what you are looking for?
2001 Chevrolet Camaro Logo

Related Topics:

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides