Question about 1993 Buick Park Avenue

Open Question

1993 BUICK PK AVE ENGIN DIES

In shop 4 mos. replaced computer, ignition module under coils, emc, ground wire, crankcase sensor what did my mechanic miss i still have an unreliable car

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 625 Answers

SOURCE: 1993 buick le sabre no spark problem

you should be hable to get some free repair tips at autozone.com, or buy it, but i will recomend you to replace the crankshaft sensor, because the crank sensor and the ignition module is what trigers the coils, i hope and i been help full and i will apreciate the ranking to me.

Posted on Jun 17, 2008

emissionwiz
  • 74945 Answers

SOURCE: 2000 Buick LeSabre ingintion coil and module

The coil is on top of the engine and the module on the firewall or suspension strut tower

Posted on Nov 06, 2008

  • 2920 Answers

SOURCE: 93 Buick Century no spark

check the crankshaft sensor or cam sensor

Posted on Jan 15, 2009

  • 1 Answer

SOURCE: coil wire firing order

2.8i cd v6 ford galaxy

Posted on Feb 02, 2009

  • 44 Answers

SOURCE: I have a 1995 Buick Park Ave Ultra. The car has

thinking that if it's not cranking at all it's not the module. The ignition module controls electrical timing... it controls the spark. It has nothing to do with the engine cranking... Have they checked the solenoid?

Posted on Mar 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there an ignition switch on a 1993 buick la sabre other than the key tumbler part?


Yes it is down on the bottom of the steering column under the dash and it is actuated by a long steel rod from the lock cylinder.

Apr 21, 2012 | 1993 Buick LeSabre

1 Answer

1996 buick park ave, wont start, has spark but no voltage at injectors...


Spark indicates crank sensor, ignition coils and modules-ok
no voltage at injectors; should be 12v in each of the injector wires (not the black one) with key on engine off. Voltage provided to injectors comes from injector driver circuit inside PCM, and pulses ground signals to open and close injectors.

Aug 26, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

Just need to know if the pass key system on a 1993 buick lessabre will cause the 3.8 engine to crank but not start no spark aii components replaced including ecm


Have you replaced the ignition module uner the coils. The pass key cuts off the starter and fuel does not effect spark. if you have no spark crank sensor cam sensor ignition module coils and wiring are all that is there.

Oct 17, 2009 | 1993 Buick LeSabre

3 Answers

93 Buick Century no spark


check the crankshaft sensor or cam sensor

Jan 15, 2009 | 1993 Buick Century

1 Answer

1992 buick park ave


have you replaced your ignition module?

Sep 02, 2008 | 1992 Buick Park Avenue

1 Answer

Thanks for the help on my 93 buick le sabre ive replaced the crank sensor but it still wont start. cranks over ok. no spark. the ignition module has been replaced


thats weird mmmm make sure than you have power going to the black and pink wire or pink with black stripe wire when you turn the ignition on, i don't know what else to recomend you since im not close to the car but the only coming problems on these cars is the module or the crank sensor, did the module installed on it was new? or used? if not sure or even if is new call to auto zone
and ask them if they test ignition modules for free i belive they do and if tehy do take the module out and take it to them, for testing, also by the time you remove the igniton coils turn the ignition on, and make sure you are geting power to one of the coil conectors, and the only way to get to the conectors is by removing the coils, and if there is not power then your ignition switch or a lecttrical problem is present, also make sure to do a cotinuity test to the wires coming from crank sensor to ignition module, check them for open or short to ground

Jul 20, 2008 | 1993 Buick LeSabre

1 Answer

1993 buick le sabre no spark problem


you should be hable to get some free repair tips at autozone.com, or buy it, but i will recomend you to replace the crankshaft sensor, because the crank sensor and the ignition module is what trigers the coils, i hope and i been help full and i will apreciate the ranking to me.

Jun 15, 2008 | 1993 Buick LeSabre

Not finding what you are looking for?
1993 Buick Park Avenue Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...