Question about 1990 Toyota Pickup

1 Answer

1990 Toy 4x4 Xcab 3.0 Truck would not start, no

1990 Toy 4x4 Xcab 3.0 Truck would not start, no fuel at fuel rail. Couldn't hear fuel pump run at tank when ign. switch on . Dropped tank and removed fuel pump. Fuel pump works on bench load test repeatedly. Plugged fuel pump into truck harness but fuel pump doesn't when when Ign. switch on. Where am I going wrong? Kevin

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check fuses and relay.

Posted on Jul 06, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Will not start

Will it start and or run with a shot of carb spray down the throttle body?

can you hear the fuel pump running?

have you checked to see if there is fuel pressure?

Apr 18, 2014 | 1990 GMC Suburban

1 Answer

Car dont start

Then you either have a blockage before the fuel rail ( unlikely ), a bad fuel pump or a problem in the electrical circuit for the fuel pump ( inertia switch, fuel pump relay, fuse, etc )

However, are you certain the vehicle has fuel in it? I just had a guy spend big money on a new fuel pump because the truck quit on his wife. The fuel gauge read inaccurately and she had actually run out of gas. 2 gallons of gas and the truck started right up again. Can you hear the fuel pump run?

Mar 07, 2014 | 1999 Jeep Grand Cherokee

1 Answer

Fuel filter located 1990 chevy 4x4 3/4 truck

I believe it should be on the inside of the frame rail.

Aug 24, 2011 | 1990 Chevrolet K2500

1 Answer

Fuel not getting to the engine, starter fluid will start it for a short time but then it dies again. I just put gas into the tank and it shows half a tank. I change the fuel filter only to discover it...

You should be able to hear the fuel pump run for about 3 to 5 seconds when the ignition is placed in the run position. To properly test the fuel pump other than just hearing it run you'll need to do a pressure test at the fuel rail assembly.

Jul 02, 2011 | 1990 Ford F250

1 Answer

I have a 1990 f150 4x4 with dual tanks. when did ford stop having the high pressure rail fuel pump. I was told 1992 but the parts store told me they show only intank furl pumps for my truck. What is...

I have the same truck as you. Mine has the pumps inside the tank also. If both tanks stopped working at the same time, you might want to check your tank selector switch. I've had 2 of them go bad in the 6 years yhat i've had this truck.

Mar 29, 2010 | 1990 Ford F150

2 Answers

94 chevy 5.7L wont turn on the fuel pump

undo the fuel line where it joins the fuel rail to your injectors.. it is under extreme pressure so be careful.. get someone to crank car for a second or two and if fuel sprays out then its not a fuel problem..

Feb 22, 2010 | 1994 Chevrolet C1500

1 Answer

1990 Mazda B2200 w EFI- Starts and dies

When you turn the key to the on position can you hear the fuel pump turn on? If not, the fuel pump relay has gone bad. Make sure you have at least 5 gallons of fuel in the tank. Check and make sure you have fuel flow to the rail, try cracking the banjo bolt on the fuel rail.

Jan 24, 2010 | 1990 Mazda B-Series

3 Answers

My 1990 nissan hard body d21 short bed truck wont start only if u add starter fluid

fuel pump and fuel sock is bad replace them but first replace the fuel filter, it's located driverside on the inside of frame rail under door.

Aug 14, 2009 | 1990 Nissan Hardbody King Cab

1 Answer

Toy starts runs 10 seconds and stops change fuel filter now wont

When you tur the key forward do you hear the fuel pump running? You should hear a low hum for about 20 seconds near the gas tank and then it stops. If you hear this your pump is good. If it keeps running or you can't hear it at all it's bad or the main fuel pump fuse is blown.

Jul 28, 2009 | 1990 Toyota Camry

Not finding what you are looking for?
1990 Toyota Pickup Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides