Question about 2002 Chevrolet Impala

1 Answer

Turn signals work fine one minute and then they stop. I can pull over to the side and turn car off and then on and it works fine or if I tap the hazard light switch they start to work. What is the problem.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

The turn signals and hazard lights are controlled by the hazard switch, which is the button you push to engage your 4 way flashers. The electronics in the switch corrode over time and the result is an intermittant, no turn signal/no hazard light problem. Under most circumstances, replacing that switch eliminates the problem. There is another possbility, rare, but possible. That is, there is a problem with the BCM and/ or the ignition switch as some of the electronics run through the ignition switch. Usually if the switch is at fault, you will get a no-start condition WITHOUT the passlock security light, and possibly a random re-set of the cluster gages similar to what you see when first starting your vehicle. Have this checked by a qualified mechanic before spending money on a new ignition switch!

Posted on Jul 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Toyota corolla 1.8, how do I get my passenger front turn signals to work? What wires have to be connected together for my turn signal and side corner marker to work?


does your car have the signal light flasher if so find it and replace it also check the fuses maybe both sides are fused separate

May 05, 2017 | 1994 Toyota Corolla

1 Answer

The turn signals in my 2000 dodge caravan work erratically, some times good for weeks, other times good only for 2 minutes.The hazard signal works fine. What can I do to correct this problem?


It could be several things, since it is all the turn signals, not just one side or the other it narrows down possibilities. Your relay may be dying. You can swap a relay with another already in the box. Just switch one beside it from another plug(verify the numbers are the same. ) If this isn't the problem, then go for the the controller; replace your turn signal control. It is fairly easy to replace and not more than about $50.00.

Oct 03, 2014 | 2000 Dodge Caravan

1 Answer

Front driver turn signal wont work on a 06 mazda 6


Check for damaged wires under the wing or exposed area.

Mar 05, 2018 | 2006 Mazda 6

2 Answers

Turn signal and brake light not working.


Change the bulb.The bulb has two lights.Running,and brake light turn signal.Its the bulb

Apr 14, 2013 | 2004 Chevrolet Silverado 1500

2 Answers

My brake light and signal light stopped working on my 1998 dodge neon on drivers side back can you help?


Does any lights on the right side work? It sounds like the ground connection to the assembly is loose.

Jan 04, 2011 | 1998 Plymouth Neon

3 Answers

Turn signals dont blink.


You need to replace the turn signal flasher, it's a cylinder shape and may be silver or gold in color. When it goes bad, the turn signals stop flashing. Good luck and keep me posted.

Feb 16, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Turn signal, tachometer, fuel and temp guage stopped working


you should pull out the gauge cluster and check the connector on the back side of the cluster.. i bet that is the issue

Jul 18, 2009 | 1989 Honda Accord 4 Door

1 Answer

Turn signal


Now replace the flasher unit! Frankster016

Oct 25, 2008 | 2002 Nissan Xterra

2 Answers

1997 sonoma turn signal flasher


it is inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher, pull it out and replace with new one (there are two flat prongs that plug in). It appears this is a well guarded secret!

Aug 26, 2008 | 1997 GMC Sonoma

Not finding what you are looking for?
2002 Chevrolet Impala Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...