Question about Cars & Trucks

1 Answer

2000 jeep grand cherokee limited- Check engine light (code PO301 cylinder 1 misfire detected) i have replaced all spark plugs - the coil pack for that specific cylinder- ran seafoam through a tank of fuel-switched fuel injectors on that specific cylinder as well. Reset light and drove for 30+ miles before going to try once again for an inspection. While waiting in line the light came back on same code. All work has been done by myself and i have come to the end of the road based on all the information i have researched. Please help!!!!

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check head gasket if it only misses when first started

Posted on Dec 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2000 Jeep Grand Cherokee Laredo 4.7 liter code reads p0307 turn the car off when I turn it back on started misfiring and sputtering and wont stay started now help


code p 0307 is misfiring on no 7 cylinder ====causes --- engine mechanical fault ---wiring---ignition/ fuel system--injector --ECT/MAF sensor---ECM
look for low fuel pressure or ignition control module

May 31, 2016 | 2000 Jeep Grand Cherokee Laredo

1 Answer

2000 Jeep GCL P0306


Many problems cause a misfire code, to understand what to check and what might be the cause or causes of the misfire please read the article at this LINK. The link is copyrighted so I can't copy it and paste here.

Jul 09, 2012 | 2000 Jeep Grand Cherokee

2 Answers

Check engine flashing engine misfire jeep cherokee Engine codes show misfire on 1-4 cylinder check engine light flashing at 75mph AC running


1st, replace your spark plugs(for gasoline engine) or heater plugs (for diesel engines)

if this does not work, have a mechanic check the timing of your engine. Engine timing is checked in the distributor, camshaft, and crankshaft.

Aug 05, 2011 | 2003 Jeep Grand Cherokee

2 Answers

Kinda putters then engine light came on and its giving me a code p0303


p0303 is a mutible engine misfire on number 3 cylinder. the best fix,

A code P0303 may mean that one or more of the following has happened:

  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • but first of all check the wires and sparkplugs first!

Feb 18, 2011 | 2001 Jeep Grand Cherokee

1 Answer

2003 Hyundai Sonata with 4 cyl. PO301 error code. Have replaced spark plugs, wires, coil packs, and mass air flow sensor. Replaced air filter due to heavy gas smell. Car was starting after tapping gas 3...


P0301 - Cylinder 1 Misfire Detected.

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Being you have a heavy gas smell I would look into the injectors. If injector #1 is over producing it can cause a misfire. Test your compression and fuel pressure.

Jan 17, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

PO301 code on Hyundai Sonata. Replaced wires, plugs, coil packs, and mass air flow sensor.


P0301 - Cylinder 1 Misfire Detected.


Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder


Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Jan 17, 2011 | Hyundai Motor 2003 Sonata

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

3 Answers

A p0301 p1142 p1545


CODE PO301 - CYLINDER NUMBER 1 MISFIRE DETECTED. POSSIBLE CAUSE- BAD COIL - SPARK PLUG - INTAKE MANIFOLD VACUUM LEAK - DIRTY OR FAULTY FUEL INJECTOR. CODE P1142 - DID NOT SEE. CODE P1545 - THROTTLE VALVE ACTUATOR MALFUNCTION.POSSIBLE CAUSE THROTTLE VALVE CONTROL MODULE FAULTY - THROTTLE VALVE IS DAMAGE OR DIRTY - THROTTLE VALVE MUST BE IN THE CLOSE POSITION - ACCELERATOR PEDAL OUT OF ADJUSTMENT. THROTTLE POSITION ACTUATOR IS SHORTING TO GROUND OR POWER.

May 09, 2010 | 2000 Volkswagen Jetta TDI

3 Answers

1999 jeep cherokee 6 cylinder engine light


1.Plugs
2. Vacuum leak
3. Injector fault
4. High or low fuel pressure.
Thats the list of things to check.
This is a #3 cylinder misfire.
There is also TSB about #3 injector needing added heat protection. This could definitely be the cause. I start at plugs and go from there.
Hope this helps.
Thank you,
Lee

Dec 12, 2009 | 1999 Jeep Grand Cherokee

2 Answers

2002 Jeep Grand Cherokee Lardo misfiring


You say you changed the cam sensor. A1391 code is a crank sensor on the top of the trans. bell housing.

Feb 22, 2009 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...