Question about Cars & Trucks

1 Answer

Car will not start when ignition key is turned and all I hear is a multiple clicking sounds.lights are ok so battery is ok.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Starter relay is bad and since you did not give a brand this is far as I can help you.

Posted on Jul 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot turn but has ignition light on.


Battery terminals OK??? Battery OK??? Check for the fuse and circuit breaker for iginition.

Mar 21, 2014 | Toyota RAV4 Cars & Trucks

1 Answer

Car would not start when i turn the key . sometimes a hear a click which could be the solenoid. other time i hear no click, it starts after i turn the the key lots of time . the ignition is ok. Could


check for lose wire connection off wires on solinoid and battery solinoid is connected on stater motor normally on the side off engine at the back off engine

Dec 09, 2012 | 2005 Hyundai Elantra

2 Answers

2003 chevy impala, turning the key on, you hear the fule pump clicking on , lights all coming on like normal, but go to start, nothing happens, battery ok, starter ok, the garage changed the ignition ...


That would be a good place to start , I would check it with a test light first but If you do that and it starts sounds like switch or connector terminals and or starter relay in fuse box

Nov 27, 2012 | 2003 Chevrolet Impala

2 Answers

2005 Altima won't start, hear clicking sound coming from fuse box,key stuck in ingintion,won;t turn over,tried to jump start.


the clicking that you hear is coming from the starter relay. sounds like your ignition starter switch or ignition lock cylinder is bad.

May 30, 2012 | 2005 Nissan Altima

2 Answers

Car won't start keys were left in ignition


Try jumping/boosting the vehicle, all of the above will still work with a weak/low battery but the starting system takes a lot of amperage to turn over the engine. If you only left the keys in the car and no lights on or anything running why would it not start if it was starting correctly before??? Whats happened since the car was last started?

Nov 11, 2011 | 2008 Chevrolet Cobalt

1 Answer

Wont turn over when i turn the key


There are a number of possibilities.
1) Dead battery. If the lights are OK and don't dim when you attempt to crank, then the battery may be OK.
2) Bad starter relay. If the battery is OK and you don't hear a click when you turn the key, the relay may be bad. They are cheap to replace.
3) If the ignition switch where you are turning the key is bad, then it won't start. To diagnose this, wiggle the key and see if that helps. Also move the key into different positions to see if one will cause it to start.
4) Your car is equipped with an electronic start inhibitor (immobilizer). The keys you received with your car are specially coded. The code in the key is transmitted to an antenna in the ignition switch where it is compared to the code stored in the start inhibitor module. The car can only be started if a properly coded key is used. If two of the keys to your car are close together, e.g., on the same key ring, when you try to start the car, this could cause interference in the immobilizer system and result in the car not starting. If this should occur, remove one of the keys from the key ring before trying to start the car again.

Dec 05, 2009 | 2001 Volvo V70

1 Answer

When I turn the ignition, the dashboard lights up but the car will not start (the motor does not sound to be turning over)


hi, if when you turn the key nothing happens or you just hear a faint clicking sound then this indicates that the starter motor needs replacing.

If you open the bonnet and get someone to turn the key to start the car you might hear a clicking sound coming from the starter motor if you hear this then this indicates the starter motor needs replacing, if on the other hand you hear nothing at all then you need to check all the wires going to the starter.
Also check the earth wires coming from the battery check they are all connected where they earth out on the body of the car and where it connects to the engine.

You could also try giving the starter motor a few hard hits with a hammer this usually gets it working for a few times.
Also if you car is manual gear box then put it in say 2nd gear then get someone to push the car slightly so that you are turning the engine that way then try starting using the key this also sometimes get the starter working be be warned this isnt permanent fix so get the starter changed sooner rather than later ok

Let me know how you get on or if you need further assistance ok

Oct 10, 2009 | 2002 Ford Taurus

2 Answers

94 z wont start


You will have to check, at the starter, for power to the SMALL wire on the starter solenoid (which is on the starter) when turning the ignition switch to start.
If there is power to this wire ( usually purple ) and power at the LARGE cable ( from the battery ) at the starter end.....you need a starter.

If you do not have power at the small wire at the solenoid with the key in start position and battery power is OK.....check the safety neutral switch.Moving the shifter around a little can sometimes allow the car to start if the neutral switch is worn.

A new battery does not always mean a fully charged battery.
Try a boost from another car before testing the starter for power.

The battery cables need to be clean and tight....and check the ground to the engine as well.

Everything else may work OK with bad connections,they don't use the power the starter needs to turn the engine over.

Sep 08, 2009 | 1994 Chevrolet Camaro

2 Answers

I posted this a little bit ago but forgot to mention The car would not crank. I started the car and it just dies. Wlould not start or even crank. When I put the key in the egnition (and NOT turning the...


check to make sure yu have 12v at the battery, once you do turn the ignition to start, if nothing, check the fuse and relays that control ignition, if all is good then the click sound is coming from the starter, have the solenoid replace.

Jul 31, 2009 | Saturn SL Cars & Trucks

1 Answer

I started the car and it just died. Would not


you may be out of gas or have a bad fuel pump

Jul 31, 2009 | Saturn SL Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...