Question about 2001 Chevrolet S-10

1 Answer

Chevy 1992 s10 no brake lights

Bulbs are good brake switch good help please

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

First put a hot wire with a fuse on it to the brake pedal switch then step on the brake and see if the lights come on, if they do then you will have to replace the steering wheel harness if all the fuses are good, also check that the trunsignals work, if they do and you have no brake lights then again it is the harness in the steering columb that is defective, they run about $25.00 and are not hard to replace. hope this helps if the turn signals work and the brakes don't it means the floating ground in the turn signal switch is bad.

Posted on Jul 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 chevy s10 v6 4.3l brake light problem


You did all this replacing but didn't check and follow power.Got any money left.lol,get a meter and check power at brake light switch,see if power is going to switch.

Jan 07, 2013 | Cars & Trucks

2 Answers

1992 chevy pu no brake tail and turn lights what should I check fuses ok and bulbs


You will need the wiring diagrams to troubleshoot this, we do not have them here at fixya, sorry. They can be bought used here if you would like

Oct 16, 2012 | 1992 Chevrolet C1500

2 Answers

1998 chevy S10 brake lights are staying on.Disconnected switch under brake pedal and the still stay lit.Please help.Thanks


With the switch disconnected there should be NO power at the bulb sockets. Somewhere there is a "hot" wire which is making contact with the brake light wiring. Using a multimeter start at the sockets and begin checking the hot wire for power. Look at the wiring also to see if you can locate where the wire is touching another live hot wire. With the switch disconnected the problem should be between the switch connector and the bulb sockets.

Nov 18, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

1996 Chevy S10 ZR2 No brake lights, CHMSL works, new bulbs, new brake light switch, good ground, hazzards work, signals work runners work, any suggestions?


check voltage from brake switch to signal light switch, signal goes from brake pedal to signal switch then to taillights, i suspect the problem is in that area

Oct 22, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

1982 chevy van no brake lights everything else works new brk lite switch dont no what to do now HELP


Check for power in and out of the switch with brake pedal depressed.If ok check to see if your hazard lights work you could have a faulty turn signal switch your brake lights feed through the T/S switch.Also make sure your bulbs are good.

Dec 23, 2009 | 1992 Chevrolet C/K 2500

2 Answers

Need a wiring diagram for a chevy s10. brake


your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

Nov 24, 2009 | 1997 Chevrolet S-10 Pickup

3 Answers

1992 chevy s10 no brake lights or turn signals


Check the front and rear (although probably the rear) turn signal bulb socket for corrosion and/or water intrusion. If you find corrosion attempt to clean (but you will probably have to replace the socket and bulb). For water intrusion you will probably have to replace the break lamp assembly.

Aug 02, 2009 | 1992 Chevrolet S-10

2 Answers

Brake lights will not come on my truck is a 2001 Chevy S10 truck


Could be the break light switch that is controlled by the break pedal..
If so - that would be a inexpensive fix..

Hope this helps !!
Please rate me good ;o)

Jul 10, 2009 | 2001 Chevrolet S-10

1 Answer

I have a 1990 chevy s10,all my lights work except my brake lights


Do you have power with a test light in and out of the switch? Do the turn signals work? Will the brake lights work if you play with the turn signal handle?

May 06, 2009 | 1990 Chevrolet S 10 4WD

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...