Question about 2001 Toyota Celica

1 Answer

I have a 2000 celicia gts. when first starting the car the gas guage the clock, the a/c light and the flashers blink for 2 to 3 mins.You can hear what sounds like the flasher switch clicking during those times.. Any help would be much appriciated

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 114 Answers

Try a new flasher!

Posted on Jul 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal flasher relay location in


Normally, yes.The flasher should be in the fusebox - turn on the signal and get your ear close to the fusebox - you should hear the flasher clicking. There should be 2 flashers there - 1 for the turn sigs and the other for the hazard/emergency flashers.

Jan 25, 2014 | GMC Sierra 1500 Cars & Trucks

1 Answer

Turn signal failure


The bulbs all have to be good for the flasher to work. The flasher is under the dash, driver side. When you turn on a blinker, do you hear it clicking under the dash. If the turn light is on , on the dash , but not flashing, then a bulb is probably bad on that side. Leave the blinker on and walk around the vehicle to check the lights. Flip the blinker to the other side and walk around the vehicle again checking lights. If all the lights are lit, but not blinking, then the flasher is most likely bad.

Dec 05, 2013 | 2000 Chevrolet Venture

1 Answer

Clock lights is extremly dim on my 2000 Celica GTS, what is the solution. Is there a possible "weak" fuse, if so which fuse is it and what voltage should I replace it with... A new clock is 300 from...


There should be a resistor switch on the dashboard to either make it dim or bright, check if it works. Otherwise it is the clock that needs to be replaced.

Sep 30, 2010 | 2000 Toyota Celica

1 Answer

Need torque for a 2000 Toyota Celicia GT 1.8L


Crank Main caps Tightening Torque

For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.

Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)

Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90° more
4. Check that the crankshaft turns smoothly.

moz-screenshot.pngmoz-screenshot-1.png

Mar 18, 2010 | 2000 Toyota Celica

1 Answer

Blinker


the flasher is a small canister shape or square like a relay,located on or near fuse box.if blinker on one side works,you can hear [& feel] flasher 'clicking' when it's on.check lights w/4ways on;if all but the rear one are blinking,suspect the wiring.

Sep 25, 2009 | 2000 Plymouth Grand Voyager

1 Answer

1999 VW Beetle outside temp display not working


For general awareness, the outside air temperature sensor is located above the inside mirror.
Try to reset the temperature measurement unit: 1. Switch engine on. 2. Press and hold clock minute (min) and hour (h) buttons simultaneoutly longer than 3 seconds. The display will show new temperature measurement unit. 

Apr 03, 2009 | 2000 Volkswagen Beetle

1 Answer

Suzuki grand vitara 2000 model the engine light blinks


Take your rig.. drive it to a gas station.. fill the tank up with gas.. also fill 2 jugs of gasoline at the same time... put the jugs in the back of it.. now drive as far as you can until the rig runs out of gas.. then, take the two jugs of gas.. pour it all over the rig, inside and out.. now light it a-blaze, then walk to your nearest car dealer and buy a new car..

Mar 19, 2009 | 2000 Suzuki Grand Vitara

1 Answer

2000 dodge caravan


check the ground wire from the battery to engine, make sure it is tight at all connections.

Aug 21, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
2001 Toyota Celica Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...