Question about 2006 Volkswagen Jetta

1 Answer

Idles rough. when under load, it sputters like a cylinder is misfiring. no smoke or leaks. any idea?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Well. if it idles rough without a load and then worse with a load i would try changing spark plugs and ign. wires. also try pulling out your idle air control valve and clean it out. if that doesnt work look up testing for your throttle position sensor. check for worn vacuum lines and check for vacuum leaks. if it runs rough throughout driving it will be ign. or fuel delivery. get some injector cleaner and throw it in your tank. if non of this works then your in the same spot as me bud. oh and check your camshaft position and crankshaft position sensor and also your speed sensor.
good luck to ya bra

Posted on Sep 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 jeepn wrangler 4 cyl 5 speed rough idle


rough idle is from faulty injectors or maf/vaf sensors or vacuum leaks
run the fault codes to determine the fault area

Jun 09, 2014 | 1999 Jeep Wrangler

1 Answer

Black smoke from exhaust


Black smoke is an indication of too much fuel-running rich-in the cylinders. The air/fuel mixture is way off-too much fuel. Possible causes are cylinder misfires (runs and idles rough, a noticeable miss), leaking fuel injectors, or a failed fuel pressure regulator.
Take off the vacuum line to the regulator (on the fuel rail?)-if there is evidence of gas in the vacuum line, the regulator has failed and excess gas is being sucked into the engine through the vacuum line.

You should take a fuel pressure reading to check pressure against the specification for your car.
Also possible that the fuel metering is correct, but the air being supplied to the cylinders is lacking. A clogged air filter could cause that, but you would also experience a rough running condition. Since you didn't mention that, I would think the fuel metering is wrong-too much gas.

Apr 10, 2014 | 2006 Peugeot 604

1 Answer

2.3l 2001 ford ranger rough idle and running rich and misfiring with p0301 code


You have to correct the cylinder misfires first

You may have vacuum leaks somewhere in the
intake or exhaust

You really need to look at data with a scan tool

You start with Mode $06 & cylinder misfire count ,if that
even works well on your motor

Then you look at fuel trim & add short & long together,
to get an idea if it is running rich,which would be a lean
condition from a vacuum leak or rich from leaking injectors

All the data is only good if you haven't cleared it or disconnected
the battery. If you did, then you have to drive until all I/M Monitors
run & then look at data

You look at O2 sensor data & even scope them

You made no mention of checking for codes
No mention of a cylinder leak down test for valve leaks
Exhaust Converter age or condition !
Fuel Pressure !

Mar 05, 2014 | Ford Ranger Cars & Trucks

1 Answer

1992 es300 blue smoke from exhaust


The most common cause of blue exhaust smoke is oil leaking past engine seals and into the cylinders where it then mixes and burns with the fuel. Oil leaking into the cylinders can cause a rough idle, misfire and fouled spark plugs. So best bet is to have a local repair shop inspect for internal oil leakage.

Oct 16, 2012 | 1994 Lexus Es 300

1 Answer

My 2003 mustang has a misfire code P0302 and runs rough under load.


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- OBD-II Trouble Code P0300? http://schematicsdiagram.blogspot.com/2011/12/obd-ii-trouble-code-p0300.html
---------- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Feb 13, 2012 | 2003 Ford Mustang

1 Answer

2003 ford f 150 4.6 v8 and the idle went from smooth to rough also sputters and sluggish while driving check engine light is flashing.


have the vehicle scanned for error codes at autozone, its free. Post codes for more help....These engines have issues with the COPs (ignition coils-over-plugs) failing prior to 80k miles. When they fail typical problems are: Sputtering under load/acceleration, rough idle, random misfires, random stalling, light or heavy jerking under load (usually at 15-35mph and 45-65mph)..hopefully this helps!!

Apr 28, 2010 | 2003 Ford F150 Regular Cab

1 Answer

I am having ongoing problems with the truck miss firing and rough running. Timing is ok, replaced cap and rotor,coil. It still starts rough,idles rough and misses when at cruising speed,although it seems...


Misfire is a common driveability problem that may or may not be easy to diagnose, depending on the cause. A misfiring cylinder in a four-cylinder engine is, pardon the pun, hard to miss. The loss of 25% of the engine's power output is the equivalent of a horse trying to run on three legs. The engine may shake so badly at idle that it causes vibrations that can be felt in the steering wheel and throughout the vehicle. The engine also may be hard to start and may even stall at idle, depending on the accessory load (air conditioning, headlights and electric rear defroster, for example).

When misfire occurs, performance suffers along with fuel economy, emissions and idle quality. And, when a misfiring vehicle is subjected to an emissions test, it will usually fail because of the unusually high levels of hydrocarbons (HC) in the exhaust.

What causes a cylinder to misfire? Basically, it's one of three things: loss of spark; the air/fuel mixture is too far out of balance to ignite; or loss of compression. Loss of spark includes anything that prevents coil voltage from jumping the electrode gap at the end of the spark plug. Causes include worn, fouled or damaged spark plugs, bad spark plug wires or even a cracked distributor cap. A weak coil or excessive rotor gas inside a distributor would affect all cylinders, not just a single cylinder.

"Lean misfire" can occur when the air/fuel mixture is too lean (not enough gasoline in the mixture) to burn. This can be caused by a dirty, clogged or inoperative fuel injector; air leaks; or low fuel pressure because of a weak pump, restricted filter or leaky pressure regulator. Low fuel pressure would affect all cylinders rather than an individual cylinder, as would most air leaks. A leaky EGR valve can also have the same effect as an air leak.

Loss of compression means the cylinder loses most of its air/fuel mixture before it can be ignited. The most likely causes here are a leaky (burned) exhaust valve or a blown head gasket. If two adjacent cylinders are misfiring, it's likely the head gasket between them has failed. Also, if an engine is overheating or losing coolant, it's likely the head gasket is the culprit.

Intermittent misfires are the worst kind to diagnose because the misfire comes and goes depending on engine load or operating conditions. They seem to occur for no apparent reason. The engine may only misfire and run rough when cold but then smooth out as it warms up. Or, it may start and idle fine but then misfire or hesitate when it comes under load. Also, it may run fine most of the time but suddenly misfire or cut out for no apparent reason. Intermittent misfires can be a real challenge to diagnose, so let's start with a steady misfire in one cylinder before moving on to intermittent misfires.

Hope this help.

Mar 25, 2010 | 1989 GMC Sierra

1 Answer

Chevy 3500 Express truck. fuel problem?


IF YOU GOT CYLINDER MISFIRE.OR OPEN FUEL INJECTOR.THAT WILL CAUSE THE PCM TO ENRICHEN FUEL MIXTURE.TO ADJUST TO DEAD CYLINDER.WHICH ACT AS A LARGE VACUUM LEAK.THATS WHY YOUR EXHAUST TAIL PIPES HAS A RAW FUEL SMELL AND WHITE SMOKES.

Sep 03, 2009 | Chevrolet 3500 Cars & Trucks

1 Answer

2002 Saturn SL1 rough, sputtering idle - cylinder #1 misfiring


spray some carb cleaner on the passeger side of the intake manifold, right behind the alternator. it is very common for those to leak there and cause those exact problems

Apr 30, 2009 | 2002 Saturn S-Series

Not finding what you are looking for?
2006 Volkswagen Jetta Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...