Question about 2006 Ford Freestyle

1 Answer

I have no brake or signal in rear?Lost rht signal yesterday ,now lost brake and signals in rear

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Inspect and test the bulbs first, yes they do burn out around the same time because they were installed at the same time or about

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost turn signals, hazards, and brake lights


Sounds like you burned a fuseable link wire. Some of the circuits are protected by a fuseable link in addition to the regular fuses you can see.
Check the wires at the starter with a test light or meter - one of them may be burned inside.

Apr 30, 2013 | 1990 Buick LeSabre

1 Answer

Suddenly, No tail lights, brake lights, turns signal or back up lights At 83000 miles, 6 months ago, replaced head gaskets. 1 week later, service engine soon light came on. Tech said it was an oxygen...


just look for the blackened/burned pin on the rear light plastic connector and sand it down to re-establish a good electrical connection and save yourself $800 big ones on replacing the multiswitch.

Jun 26, 2011 | 1999 Chevrolet Venture

1 Answer

Running lights work but no blinkers or brake lights. Changed fuses and bulbs no luck


I'm inclined to believe it is the turn signal switch. When you select left or right, the brake light is removed from that side, and the flasher is connected to the bulb instead, making the brake light on that side flash as the indication that you plan to turn. You have lost everything, but the simple answers check out.

If you have lost signals, brake lights and tail lights, then it is more likely that the ground supplied to the bulbs is not working, since the tail lights share noting in common with the brakes lights and turn signals but ground.

If the tail lights work, the fact that the brake lights and rear turn signals share that switch starts to look meaningful — even more so if the front turn signals also don't work. But the front signals and the rear signals use different circuitry in the switch, so it would be something more mechanical in the switch than electrical in that case.

Jun 24, 2010 | 1991 Buick Regal

2 Answers

96 monte carlo rear window brake light works but not brake lights. tail lights work, blinkers work, replaced brake switch and bulbs still not working


This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana

Sep 21, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

I have lost my signals and brake lights. all other lights work.Headlights, taillights, markerlights. I have replaced the "Signal Stat" in the steering column, no change. HELP


1. Check for power to the turn signal switch on the White and Yellow wires with the brake pedal depressed. If low voltage, check the stop light switch operation on the brake pedal. Check the Center High Mount stop light (CHMSL) circuit operation.

2. Check the black wires at the turn/brake sockets for a good ground.

3. If all OK, check for a bad frame ground to battery negative. 4. and dont forget to check the rear bulb

Feb 27, 2009 | 1998 Chevrolet Cavalier

1 Answer

2000 wrangler interior console lights and rear lights not working


Check the Inside Fuse Box with a Flashlight for Blown Fuses. Then Check the Fuse Relay Box Under the Hood. Check the Fuses in that one to, If the Fuses are all good, Locate the Illumination, and Brake. Replace these Relays. That should get them back on, Let me know! Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 28, 2009 | 2000 Jeep Wrangler

7 Answers

No rear brake light / turn signals on 2001 Chevy Cavalier


The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores

Jul 05, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
2006 Ford Freestyle Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...