Question about 2007 Toyota Corolla

1 Answer

Fog lamp relay location - 2007 Toyota Corolla

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 977 Answers

You may find it in the fuse box under the bonnet it looks like a big fuse about an inch square & the same height it might tell you on the inside of the fuse box lid,when you pull it out it should have four or more terminals on it, if not there look for it around the engine bay....hope this helps....cheers

Posted on Jul 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fog lights 03 gmc envoy slt not working. How can i located fuse without


There is also a relay ! FOG LP fuse # 11 10 amp location , under hood in the engine bay fuse / relay box . FOG LP relay #39 .

RR FOG LP relay #45 , RR FOG fuse #5 10 amp , location rear fuse box .
The fog lamp relays are computer controlled , by BCM

Mar 27, 2017 | 2003 GMC Envoy

1 Answer

Names & locations of the relays in the auxiliary relay box 1 on a 2003 ford explorer sport trac


There are two relay's for the fog lamps in that relay box . fog lamp isolation an fog lamp relay . You can find a diagram here http://www.bbbind.com/free_tsb.html Enter your vehicle info. year , make , model , engine size . Under system click on electrical distribution , then under sub system click on relay . Hit the search button , then click on the link . Good luck !

Mar 21, 2017 | 2003 Ford Explorer Sport Trac

3 Answers

How do I turn on fog lights on a Cadillac escalade esv 09


If it is a turn knob for lights just pull out on knob

Apr 27, 2015 | 2009 Cadillac Escalade ESV

2 Answers

Can't get power to foglights on my 2003 Explorer


Power is applied to the fog lamp switch which is a separately controlled part of the main light switch. When the fog lamp switch is turned on, power is applied to the fog lamp relay in the battery junction box which closes to turn on the fog lamps IF 20A FUSE 19 and 15A FUSE 44 in the BJB are OK. Setting the multifunction switch to HI closes the high beam relay in the BJB, removing power from the fog lamps and directing it through 20A FUSE 46 in the BJB to the high beam lamps. In other words, you can have fog lamps or high beam lamps but not both at the same time

the multifunction switch is set to HI, the high beam relay in the battery junction box closes

Oct 20, 2014 | 2003 Ford Explorer

1 Answer

My fog lights won't turn on Nissan sentra GEX 2002


There are several things that can cause your fog lamps to not work. The fog lamp circuits need to be diagnosed. Your entire fog lamp circuit can be tested at the plug for the fog lamp relay located n the relay box.

PIN 5 on the relay should have battery power at all times. This power comes from Fuse #43 (15 Amp) in the fuse and fusible link box in the engine compartment. If there is power at this pin, the fuse and the circuit between the fuse and the relay is good.

PIN 3 on the relay goes to the fog lamp bulbs. There should be continuity to ground through the bulbs on this pin. If you have continuity to ground, connecting a jumper wire between PIN 5 and PIN 3 should make the fog lamps come on unless there is a short circuit to ground, which will cause Fuse #43 to blow. If there is no continuity to ground on this pin, the problem is either that BOTH fog lamp bulbs are burned out or there is a break in the wire between the relay and the bulbs.

PIN 1 Is the battery power for the primary coil in the relay. This power comes from the headlamp switch and power is only supposed to be present here when the headlamps are on and the dimmer switch is on LOW BEAM. If power is not present at this pin, the problem is a bad headlamp switch or an open circuit between the headlamp switch and the relay.

PIN 2 Is the control circuit for the primary relay coil. The control circuit should have continuity to ground when the fog lamp switch is set to the ON position. If there is no continuity to ground with the fog lamp switch on, the problem is a faulty fog lamp switch, an open between the relay and the fog lamp switch, or an open between the fog lamp switch and ground E37 (right front of engine compartment) and ground F7 (left rear of engine compartment) Please note: This circuit has redundant grounds....if one ground is not making good contact, the other ground can still make the circuit work.

PIN 4 on the relay is not used.

If all of the circuits/pins are working as described above, replace the relay.

That is pretty much it... That is all you really need to know to get your fog lamp circuits diagnosed. Let me know if you need further assistance.

May 13, 2012 | 2002 Nissan Sentra

1 Answer

The fog lights stay on after the ignition is turned off killing the battery


Your fog lamp relay is stuck open you need to locate it and replace it.Usually located under the hood in engine compartment in the fuse relay cluster.Open the cover and on the diagram detailed and numbered you will see fog lamp relay remove and replace this relay is most likely a dealer item.

Dec 28, 2010 | 2000 Mercedes-Benz SLK

1 Answer

Fog lamps dont work i check fuses and relay the switch shows the fog lamps are on


If you have not replaced the headlamp with HID, the next thing, are the high beams on ?

If you turn the high beams on, the indicator lamp on the main headlamp switch should go out.

Next thing would be to check the fog lamp relay in the fuse panel ( passenger side kick panel by the fuel inertia switch ).

The fog lamp relay is a half size ISO relay, you should be able to swap with the trailer tow parking lamp relay ( R201 ), to test with.

The fuse you checked is the F17, the fog lamp fuse for Relay R202, correct ?

Nov 26, 2009 | 2006 Ford F-150

1 Answer

Need a fuse box diagram to wire in fog lights


Fog lamps are installed on the front bumper. The switch is located to the left of the steering column on the dash panel. The fog lamps are turned off by the circuit relay when the high beam driving lamps are turned on. The circuit relay is located on the right front wheelhouse panel near the blower motor.

Good luck, and remember rated this help.
Removal & InstallationFog Lamp Element
See Figure 1
558610d.gif
Fig. 1: Exploded view of a fog lamp assembly

  1. Remove the lamp stone shields, the four bezel attaching screws, and the bezel.
  2. Remove the reflector assembly from the lamp body.
  3. Remove the bulb holder from the assembly. Remove the element from the bulb.

DO NOT handle elements with your bare hands, always handle with a clean cloth. Oil from your hands will cause the element to fail.
  1. Installation is the reverse of removal.

Fog Lamp Switch
The fog lamp switch is removed and installed by simply prying the switch from the instrument panel and unplugging the electrical connector.
FOGLAMP BEAM ADJUSTMENT

  1. Position the vehicle on a level surface, facing a wall approximately 25 feet away. Remove the lamp stone shields and loosen the adjustment nuts.
  2. Turn the fog lamps ON and adjust as follows:
    1. Distance between the light beam centers should be equal to the distance between the lamp assemblies on the bumper.
    2. Height of the light beams on the wall should be 4 inches less than the center of the lamp assemblies when mounted on the bumper.
  3. Install all previously removed items after turning OFF the fog lamps.

1995 Cherokee Chassis Schematic
8e08df0.gif

www.autozone.com

Aug 11, 2009 | 1995 Jeep Cherokee

1 Answer

Fog lights


I recommend you check the fog lamp relay. I believe it's located in the engine compartment inside a plastic box with a removable lid. Please check your owner's manual for the exact location.

FYI, here's a link to a Mitsubishi Eclipse fog lamp relay at RockAuto parts. Page down till you get to the details. It cost ~18$
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1398955&parttype=3717&a=FRc1398955k1481568

Jun 02, 2009 | 2000 Mitsubishi Eclipse

2 Answers

1997 ford f150 fog lamps not working. Lamps new, fuse good


owners manual should explain it ... hopegully it's in the glove box

Apr 29, 2009 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...