Question about 1999 Toyota Corolla

1 Answer

My power windows will not work. I have checked and tested the fuse and it works fine. The power loch switch on the driver door also do not work, but it works on the passenger door. What should I do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Test you connections first. the ones to the swtches. check with voltmeter to see if power gets there, it should if the relay/fuse is good. then connect 2 points together with a bypass wire and see if it does anything. try them all. if nothing happens, the motor will have to be tested, if the windows /lock go up or down, the switch is defective. replace whatever is defective and re-install everything in the order and the way you took them out. enjoy !

Posted on Jul 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know how to fix the windows in the stereo in my 1996 Lincoln Continental.all the fuses are fine, I don't know what to do next


None of the windows work ? You say fuses are good , which fuses ? Did you pull them all out an look at them ? Did you check for power - battery voltage at the window switches ? There is a driver door module involved !
  • Power Windows Completely Inoperative
  • Supply open or shorted.
  • Ground open.
  • Window regulator control switch inoperative.
  • Circuits open or shorted.
  • Window regulator electric drive inoperative.
  • Driver door module.
  • PERFORM driver door module self test. Service DTCs. If no DTCs are retrieved, GO to Pinpoint Test C .
If you don't know electrical circuit testing suggest you take to a AES certified repair shop ! If you plan to do this anyway your going to need a wiring diagram , wiring harness layout , volt ohm meter !
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts

Jun 14, 2015 | 1996 Lincoln Continental

2 Answers

My passenger side electric window stopped working on my 1991gmc sierra 1500. The passenger side switch panel don't work for the window but works for the lock. Driver side master switch doesn't work for the...


The odds of both switches going bad at the same time is high, remove the door panel and tap on the window motor with a hammer, while trying the switches. I may have jammed up. Ground a test light and check the motor connection, while trying the switch, power will show on either side depending on if it turning up or down

Mar 19, 2015 | Cars & Trucks

2 Answers

I have a 95 Honda Accord four-door. Drivers door power window will not work. I have replaced the motor and I have taken apart the master window switch and cleaned the terminals. Looking for the relay fuse...


Use a test light and check if getting power on that hot wire at the connection to motor. Check it back to the fuse panel by holding the down button if window up and vice-versa. Since motor was replaced, You know it's good but no power to it. It's got to be a broken wire or unplugged somewhere. Find that spot with a test light. ALL you can do is test it till you find that broken spot.

Aug 25, 2014 | 1995 Honda Accord

1 Answer

2003 saturn vue driver window does not work took out motor tested works fine no power to motor checked 30 amp fuse good switched out relay with known good one switched out window switch still no power rear...


check for a broken wire in the harness that goes from the body to the door. this is the most common problem as these wire flex every time the door is opened

Mar 03, 2013 | 2003 Saturn VUE

2 Answers

Doorlocks dont work except from passenger side. mirrors dont work. windows dont work from anywhere


First, check all fuses to make sure that none are blown.

If the door lock switch works on the passenger side, then the drivers side door lock switch is probably faulty. Use a multi-meter to test the Drivers Side Door Lock Switch (Black and Pink/Light Green wires unlock the vehicle, and the Black and Pink/Yellow wires lock the vehicle)
If the switch is tested and found to be operating properly, you may have a faulty Body Security Module or Drivers Side Door Lock Actuator.

If neither of your Power Mirrors are working, you probably have a faulty Exterior Rear View Mirror Switch, Power Mirror Module, or blown Central Junction Box Fuse.

If none of your Power Windows are working, you probably have a faulty Accessory Delay Relay or a blown fuse in your Central Junction Box or a faulty Master Window Adjust Switch (all of the Power Window Switches feed through this Master Window Switch). If the Power Windows didn't stop working at the same time, you may have faulty Window Adjust Switches, or faulty Power Window Motors, this is very unlikely though. It would also be a good idea to inspect the wiring for any obvious damage.

Mar 15, 2011 | 2005 Ford F-150

1 Answer

All power windows don't work do I need to get new motors or fuses?


check all fuses and relays first if good check main controll switch on driver door remove passenger door cover remove plug to window switch get a test lite check to see if you have power to pass door window switch have friend move passenger window up and down from main switch on driver door while you check for power on pass window switch plug.if you have no power the main switch on driver could be bad. good luck j.f

Apr 26, 2010 | 1996 Plymouth Voyager

2 Answers

Driver power window operation


I would go through and check all fuses and relays, i have seen strange things like this happening before. Though, if you can hear the relay and the motor is in working order then chances are the fuses are good. I would also check the door jam where the harness goes through, make sure nothing is pinched or worn through. The way i would diagnose the problem: with the door panels removed and the switches hooked up, toggle the switches for the front and rear door to see if the motors are trying to turn and its not window gears that are jammed. then i would unplug the switch to test the leads to make sure its getting power. then, test the output for the switch to make sure its sending power. then got to the motor and test to see if it is receiving the pulse. also, unplug the connectors and clean all the leads and apply some dialectic grease corrosion can cause this issue...

Apr 24, 2010 | 2000 Ford Taurus

2 Answers

Power windows do not work. fuse is fine


If all of the windows do not work and the fuse is fine, the problem is either the window switch on the drivers door or the wire is bad that provides power. Remove the door panel and meter the switch, if you get power to the switch but not through the switch the problem is the switch. If you are not getting power to the switch you know you have a wiring problem.

Jul 31, 2009 | 2004 Ford Explorer

1 Answer

Camry 1996 automatic power lock doen't work, but windows work.


if you can here relays when unlocking/locking check for power at door lock actuators inside doors, if you have power on lock/unlock and good earth from connector actuators are faulty.
if no power on test light when operating check output from central door lock module while operating, none coming out of module then it might need replacing.
check 30Amp power fuse for main relay under bonnet (which goes to pin 8 white/blue on module)and 10Amp gauge fuse in cab(pin 1 blue/red on module),pin 15 is also power when relay is on(red/blue) with test light, and module/ actuators.
check outputs from module pin 3 & 4
blue/red
blue/black
that go to door locks

Jul 20, 2009 | 1996 Toyota Camry

Not finding what you are looking for?
1999 Toyota Corolla Logo

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...