Question about 1995 Jeep Grand Cherokee

1 Answer

The problem is that the when you start te motor its start everything work good buth sudenley in start tumblin there is a noise coming from the feul pomp the pump increese of speed like the thank is empty but te thank is full en when it start makin thath noise the feul presure goos down and sudenley it goose again in normal end everything work normal again after some minutes it start doing the same thing again the fuel pomp goose hi same as when the thank is empti but in this case the thank is full but still the presure goos down and the engine stops a have chanche the pump 4 a neew one dut it remane the same you think you can help me with thath problem thanks a lot edgar muskus baii

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Jeep Master
  • 1,075 Answers

Im trying to understand your english and i can not understand what your are telling me??????????but try the pump solinoid its sounds as if its gone.adrian,,,,,,,,,

Posted on Jul 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

High pitch grinding noise coming from motor when starting idling or driving

Seven ways to pinpoint that high-pitched, whining noise
Oct 2, 2013 - I recently had new fan belts installed after hearing a high-pitched, ... Do you hear the noise when the engine is running and the vehicle ... Just replaced water pump (and timing belt) yesterday and squeal ... When driving it make a noise but change out and caught speed the noise is coming from driver side.Missing: 1999 ‎plymouth ‎breeze

What is causing that irritating noise? ' DSMtuners

Troubleshooting Strange Sounds Coming from Your ...
You hear a high-pitched squeal that stops when you shut off your engine: Readjust or replace the belt. These belts should have about half an inch of play and ...Missing: 1999 ‎plymouth ‎breeze

Nov 25, 2015 | 1999 Plymouth Breeze

1 Answer

Clicking sound fuse box

Maybe the feul pump priming itself, but if everythings working then nothing wrong

Jan 20, 2014 | Dodge Ram 1500 Cars & Trucks

1 Answer


I Think Your Problem Is Still With The Fuel Supply,Have You Changed all Fuel Filters,Follow All The Fuel Lines Make Sure There Are No Kinked Fuel Hoses,Some Times You Find Small Filters In The Top Of The Fuel Injectors.
Hope This Helps

Apr 06, 2013 | 1995 Pontiac Trans Sport

1 Answer

My 199 chevy s10 wont start for some reason. battery/starter are good. cannot smell feul when peddle is pumped from engine. attempted to start with starter fluid but would not start.

Most likely its the fuel-pump; have someone turn the power on while you listen for the fuel-pump to come on when you have the gas-cap off. Just put your ear next to the gas-filer-tube and see if you can hear a buzzing noise come on when the power is turned on and the motor is not spinning.
I would ask the dealer if it has a fuel saftey shut off switch. That switch shuts the fuel-pump off after the first hit in an accident. Its a safety feature.

Dec 28, 2010 | 1990 Chevrolet S 10 4WD

1 Answer

Hi mine name is edgar muskus ok a havea problem

Change your fuel Filter. Start there,If that does not work you can drop tank and clean up screen. if that dont work then id go with regulator. I would do fuel filter first

Jun 15, 2010 | 1995 Jeep Grand Cherokee

1 Answer

I have a problem with my grand cherokee laredo v8 1998 the problem is when its on idle it idle perfect buth sudenley the pump star making a noise and the noise goose high the fuel preshure drops and the...

ok, 2 things are happening, the most obvious is that you are low on fuel the pump spins faster, becauase there is no fuel to pressurise the lines

secondly, and more likely the fuel pump is failing, it is called cavitation. the pump pressurises the lines and there is enough fuel to keep the engine alive at idle, or at 5,000 revs. however, if the pump is failing it is only pumping enough to keep it at idle, and not enough to keep up with the demand of higher engine speeds.

soon enough, the pump will fail altogether, and and the engine will not start

Jun 11, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Why is my feul reading empty? i jsut fill it up, i check the fuse, its good

Usually the fuel sending unit has developed on open circuit or the fuel tank it's self has lost it's ground....either way the tank will need to come down to find the problem.If you find that Te ground to the tank is rotted off the that needs to be repaired,if the ground is good then the sending unit may be the culprit,it can be tested with an ohm meter once it is out of the tank.

Apr 07, 2010 | 1996 Cadillac DeVille

1 Answer

1988 gmc sierra s-15 feul pump/feul delivery system,how it works.

start checking fuel pressure easier then changing pump re check that all is plugged in by air cleaner

Mar 10, 2010 | 1988 GMC S-15

1 Answer

1986 merc. topaz..wont start ??????????

cap and roter on distributer of ignition module

Jan 07, 2009 | 1986 Mercury Topaz

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides