Question about 1999 Lincoln Continental

1 Answer

How the subspension work sometimes when i get out of my car the back will lower and not come back up. it be so low my muffer drag. someone told to take the battary a loose to reset it.it rased back up but once it go down that it. and i do let it warm up be for i drive it. i also reset the button in the trunk. do not have the manuel. my dash also reads low engine coolant but it has already been filled, even once it was filed it began to make a funny rattling noise. If you have any information on what I should do please email me thank you.Its a 1999 Lincoln Continental.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 333 Answers

Ok you can get a manual at this site for free.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

The switch in the trunk is when you jack the car up to change a tire. It disables the automatic leveling device. so the car wont level while in air.

The manual has fuses locations and relays. Check them for level. Or could have leak in air suspension or could be compressor or something. If you remove the pcm fuses then it will reset the computer. I hope this helps.

Posted on Sep 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New brakes, axle and ball joint. my car that is a 5 speed in reverse it seems like the brakes are dragging.


Does the car have disc or drum brakes in the rear? If they are drum brakes, they may have been adjusted too tightly when installed and that can cause dragging which will reduce fuel economy and reduce brake life.

Nov 22, 2015 | 2000 Mercury Cougar

1 Answer

NOT LOSE WATER FROM RADITATOR ,NO WATER IN OIL ,JUST WATER COMING OUT OF MUFFER, WHERE WOULD MY LEAK COMING FROM?


Just little...? This is normal. Every time and first time start the car.
It build up moisture and go out of tail pipe. There is not more when it's hot. (This is normal) Don't worry.

mai lor

Mar 20, 2013 | GMC Jimmy Cars & Trucks

1 Answer

My airbag suspention quit working what do i do???


Someone will need to figure out if it is the height sensor, or the pump, or a leak somewhere.
The sensor turns on the pump when the height is too low.

Aug 02, 2012 | 1991 Lexus LS 400

1 Answer

Took it to part store put machine on it told me the number p0455 came up said it had to do with muffler had a leak please help


Nothing at all to do with the muffer

PO455 EVAP Control System Leak Detected
(No Purge Flow or Large Leak)

Now you see the value to the parts store code thing

You will need a repair shop, that has an EVAP
Smoke Machine and Scanner, to find and repair
the EVAP System (Evaporative Emissions)

Mar 18, 2011 | 1999 Jeep Grand Cherokee

1 Answer

I have an 03 Chevy tracker 4 cyl 2 wd I've been having problems with the front brakes locking up when driving. It happens at different times and different driving conditions. Sometimes pumping the pedal...


if both front wheels are dragging it is probably the master cylinder, if only one wheel is dragging it could be the caliper or the brake hose, jack the car up and have some one apply the brakes and try to turn the wheel the instant the brake peddle is released both wheels should start turning the instant the peddle is released....hope this helps

Nov 13, 2010 | 2003 Chevrolet Tracker

1 Answer

I have a 2005 Monte Carlo, the lowbeams will not turn on. The Bulbs are good and have power to them. Every once and a while they will come on and go back off of their own accord. Someone told me that the...


The Rearview Mirror Sensor has nothing to do with your Low Beam Headlights. It sound like you have a electrical short, check the headlight wiring for broken or corroded wires or a bad ground wire. Also check the Headlight Switch to make sure when it is turned on it is snding power to the headlights when the Low Beams are on.

Aug 13, 2010 | Chevrolet Monte Carlo Cars & Trucks

2 Answers

I have a 1994 chevy work truck with a 305. I have trouble codes # 15, 22, 33, 34, 44, and 53. The egr valve had been removed but apeared good. Someone had put a plate over the port. Additionaly someone...


DTC - 15 Engine coolant temp sensor error (low temp indicated)
DTC - 22 Throttle position sensor error (signal low)
DTC - 33 MAP sensor circuit error (signal high indicating low vacuum)
DTC - 34 MAP sensor circuit error (signal low indicating high vacuum)
DTC - 44 Oxygen sensor error (lean condition indicated)
DTC - 53 Digital EGR Valve solenoid 1 error

MAP is short for manifold absolute pressure sensor,,it senses the manifold pressure and applies the right amount of gas with the right amount of ignition timing so the car runs and performs well if this does not work properly,it throws off the whole loop cycle for the computer,,which in turn makes it run badly,,and get poor fuel economy,,it causes one to have a lack of power,,combined with a loss of fuel economy,,and also poor take offs,,and sometimes an occasional stalling,,i hope this helps.

EGR system was really developed for was emissions control. the purpose of the EGR valve is to regulate the amount of exhaust gas recirculated back into your combustion chamber to send the gasses through another cycle in order to eliminate any excess pollutants like NOX (nitrogen oxides), N2 (nitrogen), O2 (oxygen), CO2(carbon dioxide) and HC (Hydrocarbons). the EGR was also developed to lower combustion temps that's another reason why the exhaust is recirculated the exhaust gasses will not burn therefor lowering combustion temps, because there is less "usable" air going into the cylinders.

Nov 17, 2009 | 1994 Chevrolet C/K 2500

2 Answers

Vibration in the rear on my 2005 doge dakota 4x4 when i reach 50 mph and up whay could cous this to happen? put brand new tires on got them balenced and ever thing and it still does it.


Could be a bent rim , or bent axle. easiest way to check is to have someone drive behind you and watch for wheel wobble.
If I was mounting your new tires and saw a bent rim while balancing , I would have told youabout it.

Nov 06, 2009 | 2005 Dodge Dakota

2 Answers

My '99 Cadillac Catera drives well but at times it drags at times


i'm having a similar problem with the 99 catera that i just bought from an auto auction. i'm going to try and change the transmission filter today. i'll let u know if there is an improvement.

Oct 10, 2009 | 1999 Cadillac Catera

Not finding what you are looking for?
1999 Lincoln Continental Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

fordexpert

Level 3 Expert

5474 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...