Question about 1994 Buick Skylark

1 Answer

Where is the valve for the freeon on a 94 buick skylark?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Buick Master
  • 6,826 Answers

Try looking for a can-like looking 'accumulator' receiver dryer.
It will be aluminum in color and have a quick connect valve on it. This may also have a blue cap on it if it hasn't been lost over the years.

The tube from the r134a refrigerant goes here when the car is running and the a/c is set on its coldest position with fan on high.

Good luck.

Posted on Jul 05, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Refill ac

first you must determine if you have r12 or r134a to find out find the compressor follow the 2 hoses on should go tward the radiator and one should be heading back tward the firewall. you should find a valve on each line. now to determine which coolant r12 will have a small valve that looks like the valve on a bicycle tire. r134a will have a bigger valve that has a ring around it as to accept a snap clip. your local parts store should be able to show you the difference. if you have r12 then my suggestion would be to have a shop do the retrofit for you for around 100/150 dollars. hope this helps

May 28, 2012 | 1994 Buick Skylark

1 Answer

If my 94 Buick skylark has lights but wont turn over what does that mean ?

Its because you need a new turn signal switch replacing mine now my lights wouldnt turn over either

Apr 19, 2012 | 1994 Buick Skylark

1 Answer


2.4L ? , its at the left strut tower under the hood, middle bottom relay. (black)

Sep 12, 2011 | 1994 Buick Skylark

1 Answer

I need a diagram for installing a serpentine belt on a 94 buick skylark Or I need to know where the tensioner is located and once i release the tensioner will i be able to slip the belt around the pulley...

the tensioner will be one of the idler pulleys ,abd then you fit the new belt but make sure you draw a picture of the belt run before remove it

Apr 25, 2010 | 1994 Buick Skylark

1 Answer

Where is the pcv valve located on a 1993 buick skylark with a 3.3

check the front valve cover if not there check the backside one

Apr 15, 2010 | 1993 Buick Skylark

1 Answer

94 buick skylark thermostat

follow top radiator hose to engine thermostat is in the housing where the hose connects to the engine

Feb 06, 2010 | 1994 Buick Skylark

1 Answer

Buick skylark '94

i would pull a spark plug and see if its wet(fuel) sounds flooded but that is the effect not the cause . need to check fuel pressure to find the cause of the problem.

Aug 23, 2008 | 1994 Buick Skylark

2 Answers

Horn relay 95 Buick century

It is located in the convenience center to the left of the steering column.

Jul 19, 2008 | 1999 Buick Century

Not finding what you are looking for?
1994 Buick Skylark Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides