Question about 1990 Oldsmobile Ninety Eight

1 Answer

Need a diagram to replace the crank pulley on a 1990 Oldsmobile regency 98 3.8 liter

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 6,826 Answers

This is what I found on the 98 Regency instructions: Crankshaft Damper REMOVAL & INSTALLATION

  1. Disconnect the negative battery cable.
  2. Remove the belts from the crankshaft pulley.
  3. Remove the crankshaft damper attaching bolt.
  4. Attach a suitable puller to the damper and remove the damper from the crankshaft. NOTE: On certain models, removal of the cooling fan, fan shroud or radiator may be necessary for clearance. WARNING
    DO NOT pry on the damper assembly to remove it from the vehicle or component damage will result. Remove the damper using a puller only.
  5. Installation is the reverse of removal. Torque the damper bolt to specification. Fig. 1: One example of a crankshaft damper puller tool Need a diagram to replace the crank pulley on a - 85843074.gif
    Fig. 2: Removing the crankshaft damper bolt 85843193.jpg Fig. 3: Do not attempt to pry on the damper to remove it fromNeed a diagram to replace the crank pulley on a - 85843194.jpgaft, use a puller only 8584Need a diagram to replace the crank pulley on a - 85843195.jpgass= Fig. 4: Removing the damper from the crankshaft Need Fig. 5: When installing the damper, thread the bolt by hand first tNeed a diagram to replace the crank pulley on a - prev.gift cross-threading 85843196.jpg prev.gif next.gif

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac relay diagram location 89 oldsmobile 98 regency


no diagram ,sorry , but usually located in the fuse/relay box in the engine compartment and the cover will have list of which is which

May 05, 2014 | 1985 Oldsmobile 98

1 Answer

1990 oldsmobile 98 Regency Brougham fuel gauge doesn't work


Most likely the float in the tank is stuck. You'll need to pull the fuel pump out and fix the float.

Nov 27, 2013 | 1991 Oldsmobile Ninety Eight Regency

1 Answer

Need to replace the harmonic balancer on a 1992 odlsmobile 98 regency


A harmonic balancer puller-cheap and easy to use-available at any auto parts store. The hardest part is getting the crankshaft pulley bolt loose. An impact tool is best, but not absolutely necessary. Old school way: not recommended, but I've done it this way: put a socket and long stout breaker bar on the crank bolt. Let the breaker bar end rest on the ground. Now use the starter to just bump the engine over one quick time-just one little bump is all it takes to loosen the crank bolt- if you positioned the breaker bar right. Good luck, Joe.

Sep 26, 2012 | 1992 Oldsmobile Ninety Eight Regency

1 Answer

Where are the bolts to remove a starter 1990 oldsmobile regency 98?


There are only 2 bolts. They go straight up through the starter motor housing into the engine block. You may have some plastic covers that go around the starter and flywheel area that will need to be removed to get to them.

Aug 06, 2011 | 1990 Oldsmobile Regency

1 Answer

What kind of battery do i need for a 1990 regency oldsmobile?


i would recommend one with a 650 -750 cold cranking amps, and i would check for these at walmart. or auto part stores.

Feb 20, 2011 | 1990 Oldsmobile Regency

1 Answer

1990 Oldsmobile Ninety-Eight Regency Brougham


if you are not experienced mech. maybe you should take it to one

Apr 14, 2010 | 1990 Oldsmobile Ninety Eight

2 Answers

Fuse box diagram for 1990 olds 98 i want to cut


Review this Wiring Schematic about Olds 98 ('89, '90 & '91):
1989 1
1989 2

1990 1
1990 2

1991 1
1991 2

I really hope help you with this (remember rated this help). Good luck.

Oct 21, 2009 | 1991 Oldsmobile Ninety Eight Regency

1 Answer

1990 oldsmobile steering wheel audio controls


I have the same problem did you ever figure it out.

May 01, 2009 | 1990 Oldsmobile Ninety Eight

Not finding what you are looking for?
1990 Oldsmobile Ninety Eight Logo

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...