Question about 1995 Volvo 850

1 Answer

I have a leaky hose above the lower radiator hose on my 1995 volvo 850 2.4 engine,is this a coolant line to the transmission or to the power steering? PLEASE NO SPAM OR ADVERTISING,AND DO NOT SHARE E-MAIL

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volvo Master
  • 6,826 Answers

Determine this by looking to see if the coolant line leads to the transmission (bell housing made of aluminum in general) or it leads to the power steering pump (belt driven)

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the radiator form my 1997 ford taurus do I have to remove the bumper?


No,

Section 03-03: Engine Cooling 1997 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Radiator Aluminum Core, Crossflow
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Fuel Line Disconnect Tool Set T90T-9550-S
Removal
svh~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not mix Standard (green) Coolant with Extended Life Coolant (orange). If mixing occurs, drain engine cooling system and refill with originally equipped coolant type. If this contamination occurs, the service interval of Extended Life Coolant will be reduced from 6 years/150,000 miles to 3 years/30,000 miles.
  1. Disconnect battery ground cable (14301).
  1. Remove battery (10653) as described in Section 14-01 .
  1. Remove clip retaining contant control relay module and position module aside.
  1. Remove battery tray (10732) as described in Section 14-01 .
  1. Remove radiator cap (8100).
  1. Raise vehicle on hoist as described in Section 00-02 .
  1. Remove radiator splash shield.
  1. Drain engine cooling system as described in this section.
  1. Remove the radiator mounting bracket assembly.
  1. Remove lower radiator hose (8286).
  1. Partially lower vehicle.
  1. Remove upper radiator hose (8260).
  1. Remove radiator overflow hose (8075).
  1. Remove upper A/C condenser core retaining bolts.
  1. Remove upper transmission oil cooler tube clips.
  1. Remove lower transmission oil cooler tube (7C410)(EPN=7C410)using 3/8 Inch Fuel Line Disconnect Tool T90T-9550-C.
  1. Raise vehicle on hoist.
  1. Remove lower transmission oil cooler tube clips.
  1. Remove lower transmission oil cooler tube (7C410)(EPN=7C410)using 3/8 Inch Fuel Line Disconnect Tool T90T-9550-C.
  1. Remove transmission oil cooler bracket and position transmission oil cooler aside.
  1. Remove lower A/C condenser core bolts and position A/C condenser core (19712)aside.
  1. Remove radiator support bracket.
  1. Remove radiator (8005).

Jan 13, 2011 | 1997 Ford Taurus

1 Answer

1995 volvo 850 keeps over heating


Check coolant levels. Look for leaks around hoses and engine block. make sure hose have pressure when vehicle reaches running temp.Replace thermostat . If none of the above is the problem you may have a clogged catalytic converter.

Sep 13, 2010 | 1995 Volvo 850

2 Answers

How to remove radiator from my 2000 chrysler 300


Radiator Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect negative cable.
  3. Drain cooling system.
  4. Remove or disconnect the following:
    • Radiator upper crossmember
    • Upper and lower coolant hoses from the radiator
    • Transmission hoses from cooler
    • Engine oil cooler lines (if equipped)
    • Radiator fan electrical connector and fan assembly
    • Condenser mounting screws located at the front of the radiator
    • Transmission cooler line bracket from left side of radiator
  5. Lift condenser upward enough to disengage upper mounting clips. Allow condenser to rest on lower radiator crossmember.
  6. Lifted radiator from engine compartment.
To Install:
  1. Seat the radiator assembly lower rubber isolators into the mounting holes in radiator lower support.
  2. Attach air conditioning condenser to radiator
    • Torque to 45 inch lbs. (5 Nm)
  3. Install or connect the following:
    • Radiator lower hose
    • Transmission cooler line bracket and transmission hoses
      1. Torque to 28 inch lbs. (3 Nm)
    • Radiator fan and electrical connector
    • Engine oil cooler lines (if equipped)
      1. Torque to 160 inch lbs. (18 Nm)
    • Radiator upper hose
    • Radiator upper support crossmember
    • Negative cable
  4. Fill cooling system with coolant.
prev.gif next.gif

Aug 03, 2010 | 1999 Chrysler 300M

1 Answer

I need to find a guide to replacing the radiator in a 1997 Volvo S90 w/ automatic transmission.


Volvo 1990-1998 Repair Guide
Radiator - REMOVAL & INSTALLATION
Perform this work only on a cold engine.
  1. Disconnect the negative battery cable.
  2. Set the heater control to MAX heat.
  3. Remove the expansion tank cap.
  4. Place a suitable drain pan into position. Open the **** on the right-hand side of the engine block. Fit a hose to the **** to collect the coolant. Open the radiator draincock.
  5. Close the drain cocks when the coolant is completely drained.
  6. Remove the cooling fan.
  7. Remove the cooling fan shroud.
  8. Disconnect the upper and lower radiator hoses
  9. 91a8f77.jpg
  10. On vehicles equipped with automatic transmissions, disconnect the transmission oil cooler lines at the radiator. Plug the lines immediately. Catch the spillage from the radiator in a separate pan.
  11. 379639b.jpg
  12. Some vehicles are equipped with a temp sensor on the drivers side top of the radiator, if equipped remove the connector.
  13. Remove the radiator retaining bolts and brackets.
  14. a2b05c9.jpg _506019a.jpg
  15. Remove the radiator assembly from the vehicle.
  16. 45887bc.jpg

On 850/C70/S70/V70 models, the radiator comes out the bottom of the vehicle.
To install:
  1. Place the radiator into position and install the retaining bolts.
  2. On automatic transmission vehicles, connect the oil cooler lines.
  3. Install the fan and shroud.
  4. Install the lower and upper radiator hoses.
  5. Connect the expansion tank hose. Make sure that the overflow hose is clear of the fan and is free of any sharp bends.
  6. Fill the cooling system through the expansion tank, with a 50 percent antifreeze, 50 percent water solution.
  7. Connect the negative battery cable.
  8. Run the engine until normal operating temperature is reached.
  9. Bleed the cooling system.
  10. Check for leaks.
  11. Top up the cooling system, as required.
  12. Replace the cap.
  13. Check and top up the automatic transmission fluid level.

Hope thats help (remember comment and rated this).

Apr 29, 2010 | 1997 Volvo S90

1 Answer

1995 Volvo 850 Overheating


head gasket is blown

Apr 26, 2010 | 1995 Volvo 850

1 Answer

Have 95 850 volvo..heat gauge barely moving up..takes long time for any heat to come on inside..think it is thermosat. How hard is it change this and is is hard to do?


Very easy. Follow the top hose from the radiator to the engine. The Tstat is under the flange at the end of the hose. Two 8mm torx fasteners holds it down. Remove the flange, take out the old thermostat and relpace with a new thermostat and gasket. Refit flange and top up coolant. You will have lost very little because the unit is so high up. Do this while the engine is cold of course.

Jan 01, 2010 | 1995 Volvo 850

1 Answer

Water in the transmission oil 95 940 volvo


the coolant lines for the transmission cooler are on the radiator and is is separated internally from the engine cooling.radiator.
there may be a rupture internally in the radiator and you are getting coolant into the transmission.
hope this helped

Sep 10, 2009 | 1995 Volvo 940

1 Answer

1995 Volvo 850 Overheating


water pump impeller is loose on the drive shaft its plastic and they come away from the splines ,cheap crapo idea but ??

Jun 29, 2009 | 1995 Volvo 850

1 Answer

I need 2 know how to remove the radiator


THIS IS a 1995 LINCOLN CONTINENTAL W/4.6L ENGINE
iIBELIEVE TOWN CAR IS DIFFERENT LET ME KNOW IF SO AND PLEASE DONT FORGET TO RATE ME


REMOVAL
  1. Disconnect battery ground cable (14301).
  2. Drain engine coolant.
  3. Remove engine air cleaner (ACL) (9600).
  4. Remove upper radiator hose (8260) from water bypass tube.
  5. Remove radiator overflow hose (8075) from radiator (8005) and fan shroud (8146). NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
  6. Remove transmission oil cooler line from oil cooler inlet fitting.
  7. Remove nuts retaining A/C condenser core to the radiator.
  8. Disconnect engine control sensor wiring (12A581) from the auxiliary electric cooling fan motors and the CCRM.
  9. Raise vehicle on hoist.
  10. Remove splash shield from lower radiator support (16138) and front sub-frame (5C 145).
  11. Remove lower radiator hose (8286) from radiator. NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
  12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
  13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
  14. Support fan shroud, radiator and A/C condenser core (19712) with a suitable jackstand. Remove lower radiator support. Position jackstand aside and carefully remove radiator and fan shroud.
  1. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
  2. Remove upper radiator hose from radiator.
INSTALLATION
  1. Follow removal procedure in reverse order.
  2. Tighten fan shroud bolts and A/C condenser core nuts to radiator to 3-5 Nm (27-44 inch lbs.) .
  3. Tighten lower radiator support bolts to 8-11 Nm (71-97 inch lbs.) .
  4. Tighten transmission oil cooler lines to fittings to 25-28 Nm (18-21 inch lbs.) .
  5. Tighten power steering/transaxle oil cooler and splash shield retaining screws securely.
  6. Refill engine coolant.

Feb 11, 2009 | 1995 Lincoln Continental

3 Answers

95 850 Coolanl leak


Sounds like maybe a freezeplug...definitely have to go to shop if that is the case.

Oct 02, 2008 | 1995 Volvo 850

Not finding what you are looking for?
1995 Volvo 850 Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...