At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
my guess, you are in uSA
with 1995 rodeo. with unstated engine
and wont to use a 1996 scan tool on a 1995 car usa
OBD2 will not work on your 95
the 95 uses custom tools, read $$$$$$$$$$$$$$$$$$$$$$$$$
95 is OBD2
in canada even 97 fails. for obd2 started there in 1998;.
why not say what you are attempting, so we can be on same page.
Go junkyard shopping.Try to find a truck with the same or more options than yours.(Grab some extra fuses out of the same truck-most yards have a 5 dollar minimum).
ATTENTION!! Do not run the engine if you do not want to have to buy an engine!! I just solved this problem with my own 95 Rodeo the problem you are having is common on 95 rodeo with 3.2 L engine. Failure of the hydralic timing belt tensioner will allow the tensioner pulley to knock against the top of the tensioner unit ( inside timing cover lower left side of crank pulley little cylinder looking part ) held in by 2 bolts when you take it off if you can depress the button its bad . Dealer has part for $110.00, so go to auto zone but they dont have it listed for 95 rodeo have them look up timing belt tensioner for 95 honda passport $76.95 takes 2 days VDO (Vendor Order only) not a very hard job have fun dont forget to change the timing belt and water pump for good measure after the complete job is done you should not have to worry about it for another 70,000 miles.have a good day
On a v6 it must be off of a rodeo v6 only from 11-92 thru 11-95. If you get an aftermarket alt. get a beck arnley brand , others do not work. Try to get your rebuilt at a place that rebuilds alts. and starters locally.
if you go to your local auto parts store you can buy a chiltons manual for the vehicle for around $15-25 and this will tell you how to do it. hope this helps you out. and please rate my solution
thank you
×