Question about 2004 Chrysler Pacifica

1 Answer

Radio don't work, heater, lock remote and gas gauge not working right.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Sounds like you have a problem with the battery or alternator. Take care into AutoZone or other box store and have battery load tested and alternator tested. 9 out of 10 times this type of problem in Chrysler products is a dead cell in the battery. I'm suprised you don't mention any malfuntion indicator lights on too.

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 03 vw jetta the gas gauge quit right after the heater core blowed is there a fuse or relay for gas gauge everything else works


  • Improper calibration
  • Bad Fuse
  • Problem with the cluster
  • Bad sending unit For fuse location check book or call a auto parts store! God-Bless!

Aug 08, 2016 | Cars & Trucks

1 Answer

My 2004 Mercury Sable blows the run/acc fuse every time you cycle the key The car runs fine but does not have wipers radio heater controls or gas gauge This vehicle has a remote start that has not fu


If the remote start was not working and you were not blowing the fuse, and is doing so now. that would suggest that could be the problem. But something is definitely giving you a direct ground on your key cycle. I would go through and disconnect the remote start first, then if that does not fix the problem, then its time to disconnect all the accessory on that fuse and one by one check them for a ground or short. I also would like to know how are you starting the car once the fuse blows ?

Apr 01, 2014 | 2004 Mercury Sable

1 Answer

2001 Malibu Dash Lights


hi.well this sounds like a lose connection on wiring or fuse box.hpe thi helps good luck.ali

Jun 18, 2012 | 2001 Chevrolet Malibu

1 Answer

REMOTE DOOR AND TRUNK LOCKS DON'T WORK, WINDOWS DON'T WORK, RADIO DOESN'T WORK ON 1997 BUICK PAQRK AVENUE.


Did the problem come on suddenly or was some previous action or work done......

Nov 08, 2011 | 1997 Buick Park Avenue

1 Answer

Gauges for 99 Pontiac Grand Am Not working right.


This is a ground problem. There are cluster grounds on the bolts that bolt the engine and trans together. You will have two of them one in the front under the front engine mounting bracket and one towards the back of the car almost right under the EGR. This is a common problem and requires a quite a bit of time to get to the two bolts to clean the connections on the grounding clusters. I ran into this problem after replacing my engine and it took me several hours before I finally found this problem. Good luck!

Feb 06, 2009 | 1999 Plymouth Voyager

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...