Question about 1996 GMC Jimmy

1 Answer

How do you replace the fan belt of a 1996 GMC Jimmy ? After replacing the belt tensor I see no movable part in order to place the fan belt.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 736 Answers

The tensioner is spring loaded .. you can use a box wrench or somtimes a ratchet wrench (into a square hole) to pull against the spring in the tensioner such that the belt is easily installed .. a lot easier if you have three hands but doable if you only have two .. there may be a locking bolt on the tensioner .. you may have to loosen that ..

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 gmc jimmy 4x4...replaced the water pump and now it overheats every time i drive...can hear coolant boiling in reservoir tank


check water pump new doesnt mean it cant be defective check belt for proper tension if good check thermostat for proper function also check cooling fan for proper working order if good than possible head gasket blown or warped head

Jul 12, 2015 | GMC Cars & Trucks

1 Answer

Replacing the serpetine belt diagram of confeguration 1996 jimmy 4.3 v6


look here
https://www.google.com/search?safe=off&q=v6+4.3+vortec+engine&bav=on.2,or.r_cp.r_qf.&bvm=bv.51773540,d.b2I,pv.xjs.s.en_US.GZikMza0zSU.O&biw=1152&bih=745&um=1&ie=UTF-8&hl=en&tbm=isch&source=og&sa=N

Apr 06, 2013 | 1996 GMC Jimmy

1 Answer

DISTRIBUTOR FIRING ORDER ON 1996 GMC JIMMY


Check this diagram for 1996 GMC S15/T15 Jimmy 4.3 liter V-6 VIN "W"

zjlimited_764.gif


Hope this helps (remember to rating this free answer).

Oct 07, 2011 | 1996 GMC Jimmy

2 Answers

Replace water pump on 1997 gmc jimmy 4.3 litre


there are four nuts that you must remove at the front of the pulley between the fan. remove fan, fan shroud,loosen accessory belts. remove water pump pulley and the pump bolts will be exposed. check belts for replacement while you have them loose. reverse procedure to install.

Apr 29, 2010 | 1997 GMC Jimmy

1 Answer

Need to know how to take off a fan blade from a water pump ...off a 1996 gmc jimmy


It's pressed in place and shouldn't be dismantled. If a blade of the pump is damaged you must replace the entire pump.

Feb 13, 2010 | 1996 GMC Jimmy

1 Answer

Replacing the heater core in a 1996 GMC Jimmy how do I remove the dash??????? is there some place online I can find diagrams?


YOU CAN GO TO ANY AUTO PARTS PLACES LIKE AUTO ZONE OR ADVANCE AUTO.BUY A HAYNES REPAIR MANUAL.IT WILL SHOW AND TELL YOU HOW TO REMOVE HEATER CORE.IT WILL MAKE JOB A WHOLE LOT EASIER.AND SAVE YOU TIME.

Nov 10, 2009 | 1996 GMC Jimmy

1 Answer

I have a 1997 gmc sierra ext cab 4x4 and I have to keep replacing the belt every 6 months so that it won't squeak. I also replaced the tensor with the same result.


I had the same problem with the after market serpentine belt, i replaced it with the OEM and found it not to squeak. Have a closer look at the V groves on the belt and the pulley, I found the V grove on the belt had a different size then the groves on the pulley making them squeal. Good luck and hope this helps. 

Jul 02, 2009 | 1996 GMC Sierra

2 Answers

Replacing a power steering pump on a 1996 Olds Delta 88 Royale


3 bolts should be holes in the pully too go thru with an extension if their are no holes in the pully then you nee a power steering pump pully remover it can be rented for 5.00 at auto zone

Feb 23, 2009 | 1996 Oldsmobile Eighty Eight

2 Answers

Brake light over rear door on 1996 gmc jimmy


1996 GMC Jimmy no brake lite put in 30 amp and it works

Aug 10, 2008 | 1996 GMC Jimmy

Not finding what you are looking for?
1996 GMC Jimmy Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...