Question about 1999 Mercury Cougar

2 Answers

Where is the master cylinder on a 1999 mercury cougar located?

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 6,826 Answers

The master cylinder is attached neer the firewall on the driver's side, bolted to the 'booster' which is a large round metal part attached to the firewall.

It's on the other side of the foot brake pedal.

This is the case on pretty much all cars.

The master cylinder has a reservoir on top with a cap where you can add dot 3 brake fluid.

Good luck to you.


Posted on Jul 05, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 6,826 Answers

On the firewall mounted on the brake booster,the booster is round,,almost like a puffed up pancake,

Posted on Jul 05, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: water pump location on the 2.5L V6 engine 1999 cougar

It is located on top of the engine under the throttle body, it sucks, plan on a whole day if you are a good machanic.

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is ignition control module on a mercury cougar rx7 1997 located


The switch is located under the hood of the vehicle and is attached to the brake master cylinder and wired to the cruise control.


-----------------------------------------------------------
NEC Dash Programmer ECU Flasher

Dec 07, 2012 | Cars & Trucks

1 Answer

2001 mercury cougar, master cylinder ran dry because slave cylinder below is leaking at the firewall. I filled the master cylinder and tried bleeding the clutch at the transmission until fluid stream...


No, you don't need to replace the clutch itself.
Don't be surprised if the slave cylinder replacement doesn't fix it.
Could be the master cylinder.

Sep 12, 2010 | 2001 Mercury Cougar

1 Answer

I replace my break pats on my Mercury 1999 Cougar but the lights is on, how can I reset the light?


Sounds like the brake fluid level may be low or possible a bad level sensor in the master cylinder.

May 06, 2010 | 1999 Mercury Cougar

1 Answer

6 month old clutch wont go into gear running, motor shut off goes into gear 1999 COUGAR 2.0 Didnt know if master cylinder could have went out or clutch again


Go to carhelpsite.com it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't have to buy or fill out anything on the ads,so help keep the site free.

Apr 13, 2010 | 1999 Mercury Cougar

1 Answer

Do ou have a diagram for the brake lines on a 1991 mercury cougar


YOU WILL NEED TO GET A NEW BRAKE LINE MADE FOR YOUR WHEEL CYLINDER THIS WILL HAVE A THREDED NUT WHICH WILL FIT INTO A HOLE IN THE WHEEL CYLINDER, IF THE BRAKE IS AT THE MASTER CYLINDER YOU WILL STILL NEED A NEW ONE MADE FOR THIS , GO TO A MOTOR SHOP WITH YEAR OF CAR AND GET A NEW ONE , OR GO TO A CAR BREAKERS YARD FOR USED ONE .

Oct 20, 2009 | 1991 Mercury Cougar

1 Answer

Blower motor fuse is located 99 mercury cougar


SECTION 412-04: Control Components 1999 Cougar Workshop Manual REMOVAL AND INSTALLATION Blower Motor Resistor Removal
  1. Remove the upper footwell trim panel (passenger side).
    • Remove the pushpins.
  1. Disconnect the blower motor resistor electrical connector.
  1. Remove the blower motor resistor.
-------------------------------------------------------------------------
f9d16f6.gif

May 06, 2009 | 1999 Mercury Cougar

1 Answer

How do I check the clutch fluid to a 1999 Mercury Cougar 4cyl


The brake master cylinder reservoir has a separate chamber and is used to supply the hydraulic clutch system. So make sure master cylinder reservoir is full.

http://i253.photobucket.com/albums/hh43/chuck943/M1601026.jpg

Here is a pic of the system.
1. Brake master cylinder reservoir
2.Clutch master cylinder
3.Clutch slave cylinder with integrated release bearing

Mar 22, 2009 | 1999 Mercury Cougar

1 Answer

Water pump location on the 2.5L V6 engine 1999 cougar


It is located on top of the engine under the throttle body, it sucks, plan on a whole day if you are a good machanic.

Dec 31, 2008 | 1999 Mercury Cougar

Not finding what you are looking for?
1999 Mercury Cougar Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...