Question about 2004 Infiniti QX56

1 Answer

My back brakes are making noise, what type of brake pads are used on QX56 infinity 2005

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Infiniti Master
  • 6,826 Answers

Try your parts store for this one. They have a wide range of different brake pads for your vehicle with prices going up for the better ones.

I use Wagner on my 1997 Cadillac deville that do not require shims as they are built in.

These are fool proof pads.

Good luck to you...

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 sequoia limited and just new rotors and pads on front and refaced rotars and break pads in the back. Brakes make noise when shifting from park to drive or reverse and vice versa. Any idea the cause?


I have heard that Toyota's are sensitive to off brand brakes. IF you did not use Toyota brake pads, you might need to wait and see if it goes away with time. If not use Toyota pads.

Apr 10, 2014 | 2005 Toyota Sequoia

1 Answer

When I brake is grinding


check the pads , depending on the miles on your vehicle, they may have excessive wear and may need replacement, most shops will do a free brake inspection for you , but go to someone you trust

Aug 19, 2011 | 2006 Infiniti QX56

1 Answer

I had new brake pads and rotors put on my 2005 equionox...now I am getting a grinding noise (intermitently) when making a final stop at a light or stop sign. Sometimes it feels like it's not stopping...


May be the grade of pad that was used in replacement,Would find out if ceramic brake pad is available for this vehicle.They usually cost a little more but provide better perfomance typically less noise issues and create less brake dust.

May 19, 2010 | 2005 Chevrolet Equinox

2 Answers

2005 hyundai accent is making a chattering sound


Depending on the quality of pad used you may get some noise from the brakes mainly squeaks. Grinding or chattering is unusual though. Id take it back to the place that installed the pads/shoes and have them check it out again. Do you get a vibration while braking?

Jan 07, 2010 | 2005 Hyundai Accent

1 Answer

I changed the brake pads on a 05 equinox


Did you bump the ABS pickup at the wheel hub when you changed the brakes? Or are the wires maybe nicked? The noise is normal and might go away depending on the brake pad type you replaced with. The ABS problem might be caused by you.

Nov 24, 2009 | 2005 Chevrolet Equinox

1 Answer

Infinity


Some pads are more prone to this condition than others. The best fix is to make sure the mechanic used a lubricant on the back of the pads before installation. This will reduce some brake "chatter", and in most cases cure this problem...Good Luck!

Oct 18, 2009 | 2004 Infiniti G35 Sport Coupe

1 Answer

Toyota Camry 2005-Brake pads noise problem


The rear brakes should last from 30000 to 60000 miles or 50000 to 100000 kms. So something is wearing out your brakes too fast. Are you doing the work or some shop. I also assume you have discs and not drums since you mention pads and calipers. I am not certain but usually you need a tool to turn the pistion in when putting in new pads. I would make sure the pads are releasing properly by raising rear of car, stepping on brakes a few times (with engine off and try see if wheels are free by spinning by hand, also try to use handbrake a few times and release it and see if wheels spin freely. Maybe rears always applied. Notice burning smell, are discs glazed from heat? Are you using really cheap pads. Also check the proportioning valve which will decrease pressure to rear brakes during hard braking. Do you notice rear wheels squeling during hard braking. Do you have antilock brake system? Also are you using good quality pads and rotors.

Apr 30, 2009 | 2004 Toyota Camry

1 Answer

2005 Acura tl brake replacement


The Brembos that come on Type S/Manual models wear fast. I've changed them at 20,000 miles. They are expensive also.

Non-Type S/Manual models I have seen go 80,000 miles. The biggest factor on brake wear is how the vehicle is driven.

At 50,000 miles I would have them inspected. Depending on where you go, make sure you get an accurate measurement of both pads (inboard and outboard). 2mm is the service limit and about that time the indicators start making noise, but not always. Most indepent shops are going to sell you brake pads at 4mm. That's another 10,000 miles at least you could have driven on them.

Never replace just the brake pads, resurface or replace the rotors. The uneven surfaces of the rotor will cause your new pads to wear incorrectly and possibly cause brake noise. Most aftermarket pads will cause a squeel.

Sep 12, 2008 | 2005 Acura TL

Not finding what you are looking for?
2004 Infiniti QX56 Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...