Question about 2005 Hyundai Elantra

1 Answer

My elantra will start when I push in on the clutch but the clutch goes all the way to the floor with no resistance and will not go into gear. I have bled the clutch and added new fluid but this did not help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 6,826 Answers

Usually, this points to a bad master or slave cylinder for the clutch.

Sorry.

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Honda Civic manual trans will not shift into gears. Car starts, push in clutch and it goes to the floor, release clutch and comes back up. Unable to put into gears. Brake fluid and clutch fluid seem...


Eric, how are you confirming whether or not the car goes into gear if you shift gears without the engine running? One way would be to put it in 1st and see if you can push the car. If you can't, it is in gear.

Another option is to roll the car slightly forward or backward (engine off) while trying to put the car in gear. Once it is in gear, then the car shouldn't move any further. However, if it goes into gear, DO NOT start the car without taking it back out of gear.

The clutch is much more likely to be the problem than the transmission.

If the clutch fluid ever ran dry, then the clutch hydraulics will need to be bled of air. Otherwise, the problem could be the clutch master cylinder, slave cylinder or throwout bearing. Since you didn't report the clutch slipping (e.g. engine revving without accelerating when in gear) it is likely not the clutch disks themselves.

Jun 11, 2014 | Cars & Trucks

1 Answer

Clutch will not engage when it was engaging perfectly to begin with.


Your car has a hydraulic clutch release system, it is defective, either the master or slave cylinder is leaking or pulling in air and this causes the clutch pedal to go to the floor.

Aug 06, 2012 | Cars & Trucks

1 Answer

1989 Jeep Cherokee - replaced clutch master cylinder, clutch looses resistance sometimes. Goes all the way to floor.


they hav a nuetral safety switch or depressn the pedal is common--send issue to magicmechanic in orlando-hes a mastertech with any car or system--chec out the sites Q n A first

May 20, 2012 | Cars & Trucks

1 Answer

92 bmw 316i clutch has no resistance when push it goes all the way to the floor


hi this means either the clutch has warn to its limit, but this is rare that will happen this is more you have a leak on the hydraulic system of the clutch, check under the dash where the clutch peddle goes and see if the carpet is damp, this will be the master cylinder leaking and needs replacing the other thing that could be leaking is the slave cylinder this is on the gear box/ transmission box or you have no hydraulic fluid in the reservoir and needs to be topped up and bled as you have air in the system this is the reason why it is going all the way with no feedback...hope this helps

Dec 27, 2010 | BMW 318 Cars & Trucks

2 Answers

Clutch go's all the way to floor with no resistents can not shift gears engine won't stay on. 1987 5 speed pickup truck


Sounds like the hydraulic fluid may have leaked out of a line or the slave cylinder is leaking, or the master clutch cylinder has an internal leak that doesn't actuate the clutch effectively when the pedal is pushed to the floor.

Oct 28, 2010 | 1987 Nissan Pickup

1 Answer

Clutch goes all the way down to the floor, unable ...


Does the clutch pedal offer any resistance? The clutch and brake system use the same reservoir, there is a hose coming out from the side of the reservoir that goes over to the clutch master cylinder. Sometimes the brake fluid level goes low as brake pads wear and lowers the fluid level too low to work the clutch. On the front side of the transmission, is a clutch slave cylinder, check it for leaks, if it leaks replace it. Hope this helps, let me know.

May 21, 2010 | 1994 Ford Escort

1 Answer

Clutch Pedal to Floor


slave cylinder needs replaced

Nov 12, 2008 | 1991 Jeep Wrangler

1 Answer

I,ve got a problem starting my 97 hyundai lantra 5dr sedan. i think it has something to do with the switch on the cluth, car normally won,t start unless clutch fully engaged,. i,ve got a new battery and...


try pushing the clutch to the floor with you toes if it starts and won't unless you push to the floor its the clutch start switch 22 bucks at auto zone i will be gettng help installing the new one i will let you know.

Oct 08, 2008 | 1995 Hyundai Elantra

Not finding what you are looking for?
2005 Hyundai Elantra Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...