Question about Toyota Paseo
The fuel filter is located under hood, driver side, lower firewall, mounted below brake master cylinder.
IMPORTANT: Pressure must be released before opening fuel system.
Don't forget to rate this post. Good Luck!!
Posted on Jul 07, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is located on the left frame rail in front of left rear tire.It has a plastic clip in each fuel line that will be white in color.Remove the clip then disconnect fuel line.Make sure to replace the clips,DO NOT reuse the old ones. Install the new clips into the connector then snap the connectors on to the filter.
Posted on Mar 01, 2009
Inside the frame rail on the driver's side. You'll need a 5/16" (8mm) socket if it is the type that is held in with a hose clamp, or a 10mm if it is the bracket type. Some of the lines are held in with white plastic clips, others by special springs. If it is the type without clips, you'll need a special tool to release them. Also, if it is the type without the plastic clips, make sure they gave you the right filter. If the new filter is shorter than the old DO NOT PUT IT ON. If you do, you will have to cut it off next time you have to change it as the tool will not fit in. The two filters look the same except the tubes are longer on the non-clip filter.
Posted on Dec 13, 2009
Tips for a great answer:
May 18, 2016 | 1992 Toyota Paseo
Jan 07, 2016 | Toyota Cars & Trucks
Sep 19, 2014 | 1992 Toyota Paseo
Feb 10, 2014 | 1992 Toyota Paseo
Feb 28, 2013 | 1992 Toyota Paseo
Dec 01, 2011 | 1992 Toyota Paseo
May 16, 2009 | 1992 Toyota Paseo
Mar 01, 2009 | 1992 Toyota Paseo
Dec 30, 2008 | 1992 Toyota Paseo
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: