Question about 2005 Chrysler Town & Country

Open Question

How do I program my 2005 Town and Country DVD remote? I am guessing this is the problem. When we put in a DVD we can see the menu but, we can not play it. The remote has new batteries and the light works on it. Can you help?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 770 Answers

SOURCE: Just bought 2005 Chrysler Town and Country and no

Naturally you could get them from Chrysler parts, if you want to save, go to radio shack and let the associate there check out the jack and he can come up with an inexpensive solution.

Posted on Jun 19, 2009

  • 22 Answers

SOURCE: universal garage door opener

Hold the remote close to console (3 inches or so). Now press the button on the remote and also press a number on the overhead console. The display should change to the message "training" and after 30-45 seconds the programming should be complete. Release the button on the remote and console and see if it works.

If not you may need to erase all codes in the console. To do this press both outer buttons on the console and hold them for about a minute.

Posted on Jul 23, 2009

  • 3 Answers

SOURCE: Automatic door lock on 2005 Town & Country not

Try disconnecting the negative battery terminal overnight. This resets the onboard electronics.

Posted on Aug 24, 2009

  • 4044 Answers

SOURCE: 2005 Town & Country Van dead battery after short trips

Possible dead cell in battery, most likely a fault in the charging system. First, Jump Vehicle to get started then remove the Negative cable. If the vehicle dies when you take the jumper cables away or when you disconnect the negative cable your alternator or charging system is faulty. If the vehicle runs without battery connected you have a bad cell in your battery, replace the battery.

Posted on Dec 12, 2009

Testimonial: "Thanks for the suggestions. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 chrysler town and country how to attach aftermarket dvd player to factory screen?


The best reply for this is to see a radio teck that fits wireless into cars as they have the gear , looms and connections and the know how to do the job without upsetting the ECM program. IT will be money well spent especially if you use an accredited radio technician.

Jul 22, 2014 | 2005 Chrysler Town & Country

1 Answer

Dvd stuck in mt 2007 chrysler town and country how do i get them out


It most probably was loaded into the DVD incorrectly. It will require the removal of the drive - not a hard job. It will suprise you in that the disc will actually be above the drive (just resting on top) not in it. The disc was angled up when it was put in. Be sure in the future to place it in straight and level.

Nov 12, 2010 | 2005 Chrysler Town & Country

1 Answer

Remote won't work DVD only goes to menu and stops


Where you ever able to get an answer to this? My husband and I just bought this van and are having the same issue! Please help if you have solved this issue. Thanks

Feb 15, 2010 | 2005 Chrysler Town & Country

1 Answer

We have a 2005 Chrysler Town and Country. The remote will open the tailgate but not the side doors. Also the switch on drivers door will not lock or unlock the other doors.


I believe the doors have to be unlocked before the remote can open them. If they are not unlocking by remote, it seems a common solution is to remove the IDO fuse in the fuse box under the hood, and simply put it back in. This resets the electronic problems and seems to allow everything to work again. If the problem reoccurs regularly it may be because one or more locks are not functioning properly causing the system to shut them down. Lubrication usually works well.

Sep 28, 2009 | 2005 Chrysler Town & Country

2 Answers

Keyless remote will not work


Remove and reinsert the IDO fuse in the fuse box under the hood.

Sep 20, 2009 | 2005 Chrysler Town & Country

1 Answer

Automatic door lock on 2005 Town & Country not working. I'm guessing it's a fuse, but don't know which one.


Try disconnecting the negative battery terminal overnight. This resets the onboard electronics.

Jul 04, 2009 | 2005 Chrysler Town & Country

1 Answer

Just bought 2005 Chrysler Town and Country and no remote and no Wireless headphones for dvd player! Where do I get replacements?


Naturally you could get them from Chrysler parts, if you want to save, go to radio shack and let the associate there check out the jack and he can come up with an inexpensive solution.

Jun 19, 2009 | 2005 Chrysler Town & Country

1 Answer

Six disc dvd player problem


First remove the drink tray by pulling out and push down on lever in back. Then remove strip below dvd player. (this will pop off). There is 2 mounting screws behind it.Remove those. Then put a thin blade on side of silver trim. Gently pry and trim will pop off. there is 2 mounting screws behind trim for dvd player. Remove those and slide out dvd player and remove wiring harness. This is for 2005 town and country van. Now if I could only fix my dvd player. Good luck.

Jun 04, 2009 | 2005 Chrysler Town & Country

1 Answer

Universal garage door opener


Hold the remote close to console (3 inches or so). Now press the button on the remote and also press a number on the overhead console. The display should change to the message "training" and after 30-45 seconds the programming should be complete. Release the button on the remote and console and see if it works.

If not you may need to erase all codes in the console. To do this press both outer buttons on the console and hold them for about a minute.

Apr 16, 2009 | 2000 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...