Question about Cars & Trucks

1 Answer

My wachamacallit is giving me problems. I tried adjusting my thingamajig but that didn't work. Can U help?

Posted by Anonymous on

  • Alex Jul 05, 2010

    Get real


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 8,404 Answers

Of course I can ... adjust the high speed modulator and if that doesn't work, replace the whizzbang and add 3 ounces of whinney juice.

Thanks for your interest in and please remember to post your evaluation to my right on answser.

Posted on Jul 05, 2010

  • A Miller Jul 06, 2010

    I forgot to tell you, you will need to check and possibly adjust the kanutzenator valve as well.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 jeep liberty sport will not start. It won,t even turn over. drove it yesterday no problems. after 1 hour tried to start didn,t work Can you help?

Have you tried to jump started ? If your jeep starts when giving it a jump, you may have a bad battery. Check fuses for fuel and ignition systems. If your battery is bad, could be because the alternator is not charging it. Might want to have this component tested.

Nov 20, 2016 | 2002 Jeep Liberty

1 Answer

2001 nissan sentra neither one of my turn signal bulb are working tried replacing the bulbs that didn't work.also tried switching the pigtail that didn't work either any idea what the problem

I had this problem with my car. Is ur hazzard flasher working? if they are working and the turn signals are not working. Try replacing the hazzard light switch. If the hazzard are not working then the combination flasher unit is bad. its what controls the signals and flasher.

Nov 10, 2012 | 2001 Nissan Sentra

1 Answer

Interior light won't come on when I open the front doors

If you have tried to adjust your interior lights with your dash light adjuster, and it didn't work, I would say you either have a bulb out, or a blown fuse. Hope it's something simple for you. GOOD LUCK

Jul 02, 2012 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Adjust valves on a 3.8 v6 ford

You don't no adjustment. If they make noise change oil more often or use valve lifter cleaner. Replacing them is last resort. Back in the old days I didn't believe in those cleaners but a company told me they would give me a jacket for every ten cans I sold I sold over 40 cans. What surprised me was that it worked in about 90% of the cases. Most have a guarantee save your receipt

Dec 08, 2011 | 1993 Mercury Cougar

1 Answer

97 grande cherokee 4.0 straight 6....dropped automatic trans and replaced the torque converter and seal that was leaking. put back together and shifts and bogs down in reverse but drive hesitates until...

I'd venture to say your linkage is out of adjustment - don't mess with the bands if the transmission worked before. Move the shift lever all the way to the lowest gear detent (farthest away from Park), then tighten the linkage cable adjustment until the shifter on the transmission is right at its stop on the transmission. The shift indicator needle should be centered on the letter. (If the transmission is now working properly and the needle is still off, you can adjust the needle inside the shifter housing by sliding its clip on the bracket attached to the shift lever. I didn't say it would be easy to get at it...)

Nov 14, 2011 | 1997 Jeep Grand Cherokee

2 Answers

I was driving my 96 Dodge Stratus ES V6 & I came to a stoplight & the car cut off. I tried to start it back up & all it would do is trun over but wouldn't fire. I tried replacing the fuel...

  • P0736 Improper Ratio for Reverse Gear.
  • P0120 Throttle/Pedal Position Sensor/Switch "A" Circuit Malfunction
  • P1783 Transmission Over-Temperature Condition.
  • P1784 Transmission system problems.

  • All these codes together are pointing to the solenoid pack on the transmission. Something with the actuators and or pressure switches. You can also have something further internally wrong with the transmission.
  • I know your trying to save money but this should be handled by a full on technician and preferably one that specializes in transmissions. I didn't want to have to tell you this but I wanted you to know exactly what you are dealing with.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Aug 15, 2011 | Dodge Stratus Cars & Trucks

2 Answers

Wipers do not work in intermittent position. They do work in low and high speeds but do not automatically return to the park position. They stop wherever you turn the switch off.

i belive that your wiper switch has gone out on the intermittent side. this is a very common problem.
I hope this helps you
Please leave rating

Apr 21, 2009 | 2000 Isuzu Amigo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides