Question about 2005 Chrysler Town & Country

3 Answers

Automatic locks will not work with key nor power switch....must be unlocked manually...what can be the problem?

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Pull 'IOD' fuse for a minute

Posted on Jul 09, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 443 Answers

Suggestion: Check the fuses that are under the dash and/or under the hood that supply power to the electronic locks, it sounds as if you may have a "blown" fuse.
Good Luck !

Posted on Jul 05, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My mechanic just told me it would cost overt $200 to put a new actuator on (to fix the problem of non-working automatic locks). Should I call and cancel service?????

Posted on Jul 12, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

dustydis
  • 373 Answers

SOURCE: power lift gate on 2001 chrysler town and country not working

the shock are bad

Posted on Sep 23, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock Child lock on nissan if the lock is on and dont open from outside


All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).
? All doors unlock automatically when the ignition is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors.
2. Place the ignition switch in the ON position.
Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more
than 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver's or front passenger's side).
NOTE:
The automatic door unlock function can be changed using the Vehicle Settings in the vehicle information

Sep 30, 2016 | Nissan Pathfinder Cars & Trucks

2 Answers

Mervia. Why is central locking not locking any door?


It's only an educated guess. If all other locks switches are working it' either the switch panel itself or an electrical short. Switches are popular, get it checked first

Nov 22, 2015 | Vauxhall Cars & Trucks

1 Answer

So far, what I have tried hasn't worked. Guess I will have to take off door panel. But which door? Driver side door locks and unlocks with remote, with key and with inside door switch. Passenger door...


Since the driver's door gets the most use, and all circuits run through the master switch, check driver's door first and check the wiring at the hinge area for breaks.

Jan 29, 2015 | Cars & Trucks

1 Answer

Power door locks will not lock except manually


First of all, check ACC fuse in the driver side junction box. The central controller for power door locks is the body ECU. From your description it may be working only partially. Can the doors be locked using a key? If so, this would indicate the actual locking mechanism is OK. Do the front door lock control switches lock the doors?

Oct 25, 2012 | 2002 Toyota 4Runner

1 Answer

Horn honks doors lock be self


does this help? look in owners manual for how to turn "on or off" the auto lock feature.


Automatic Door Lock/Unlock
The automatic door unlock function is a vehicle personalization feature with the following 3?programmable modes of operation:
1. All: All of the doors will automatically unlock. 2. Driver: The driver's door will automatically unlock. 3. None: The doors will need to be unlocked by a door switch command or by pressing the the lock button on the RKE transmitter. The All or Driver modes may also be programmed as to when the automatic door unlocking will occur.
1. Key Off: The door(s) will unlock when the key is turned off. 2. Shift to Park: The door(s) will unlock when the vehicle is shifted into P (Park). The delay lock function may be enabled or disabled. When the function has been disabled, the doors will only lock by a door switch command or by pressing the the lock button on the RKE transmitter. When enabled, the doors will not lock until five seconds after the last door is closed.

Oct 21, 2011 | 2007 Chevrolet Malibu Maxx LTZ Hatchback

1 Answer

Replaced battery now having problems with automatically locks


Synchronization
When
Key buttons operated repeatedly while vehicle out of range and system becomes inoperative.
How
Press key lock or unlock button for approximately 1 second. Manually lock or unlock vehicle. System should now lock or unlock vehicle. If not, carry out programming procedure.
Programming
When
Key added or replaced. System malfunction.
How -

98MY
Keys can only be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed.
How - 99MY

Switch ignition ON. Insert key to be programmed into driver's door lock. Lock vehicle manually. Press lock or unlock button. Wait at least 1 second. Press lock or unlock button again. Vehicle horn sounds to indicate correct programming. Keys can also be programmed using diagnostic equipment.
NOTE: A maximum of 4 keys can be programmed.

Feb 05, 2010 | 2002 Volkswagen Passat

1 Answer

2003 Tiburon power locks keep automatically lock


replace both door lock actuators to fix problem.

Aug 31, 2009 | 2003 Hyundai Tiburon

1 Answer

Auto door locks don't work, key stuck in Ignition


If the key is not coming out of the switch, it may be off, but you haven't turned it far enough back that final click to remove the key. Some have a button you have to depress to get the key switch to turn back that final click. That's it.

Nov 13, 2017 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Power locks will not lock or unlock doors. will only unlock if using the key and or manual


The key cylender has a switch attached to it so that is why that works. A relay must be at fault for your problem

May 22, 2009 | 2001 Ford Excursion

1 Answer

1992 chevrolet cavalier: Power locks


the door lock actuators are not working properly/Please rate my response thank you very much

Jan 31, 2009 | 1992 Chevrolet Cavalier

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...