Question about 1998 Dodge Ram 1500 4WD

1 Answer

HOW DO I PUT GAS FOR AC AND MY HORN FUSE KEEPS SHORTING OUT EVERY TIME I TRY TO USE THE HORN ON MY 1997 DOGE RAM

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 54 Answers

Gas? Do you mean freon? As for the fuses, replace the horns, they are shorted to ground.

Posted on Jul 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Horn blow out


The horn should be behind the grille or on one of the fenders in the engine compartment. If you unplug it and the fuse does not blow I would say the horn is done.

Sep 08, 2012 | 1997 Jeep Wrangler

2 Answers

1990 new yorker. fuse for the dash lights,radio and dome ligjts keeps blowing


there might be corrosion on the ends of the fuse holder check that or try tuner cleaner before inserting the fuse.could also be a short in the fuse holder.

Sep 05, 2012 | 1990 Chrysler New Yorker

2 Answers

My 2003 Toyota Highlander horn won't work. We took it to the dealer and they replaced a fuse but only the high tone sounds. Then a week later that fuse blew. We have replaced the fuse about 4 times and...


horns only one of to wires takem reroute same route new wires u have a short between the fuse box n the horn befor u put to much money into fuses they can be pricey when u add them all up shop costs n total just re place ur to horn wires

May 01, 2011 | 2003 Toyota Highlander

2 Answers

2006 grand prix horn fuse keeps blowing. what should i look for


horn may be shorted internally. Try pulling the connector off the horn, put in a fresh fuse, see if it blows.

If it still blows, you have a short in the wiring or the relay. If there is no obvious short in the wiring, change the relay.

If the fuse doesn't blow with the horn disconnected, replace the horn.

Sep 11, 2010 | 2006 Pontiac Grand Prix

2 Answers

99 dodge durango. My horn keeps blowing the 20 amp fuse under hood. There is also a horn relay. Could that be the problem? The horn will work after I replace the 20 amp, but blows within a few times of...


could be you might check it out. many items take the same relay so you might try exchanging it with another one with the same numbers. If that isn't it you may have a short in the horn itself.

Aug 11, 2010 | 1999 Dodge Durango

1 Answer

The horn keeps blaring by itself on my 1997 Dodge Ram pickup, Where do I find the fuse box and which fuse disables the horn?


the horn warning is a legal requirement here in uk and should not be disconnected if it is faulty and would suspect the problem is the press button ?however for time being it would be better unplugging the wire from horn itself ? untill you rectify problem

Jan 01, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

Horn blows fuses


Don't bypass the fuse, you'v either got a short in the horn or the wrong fuse
it takes a 20 amp and I highly ecommend using a plug in breakr instead of a fuse

Put in a breaker, if it trips unplug the horn and try again, if the breaker trips again, there's a pinched wire, if it does NOT trip replace the horn itself

Sep 13, 2009 | 1997 Chevrolet S-10 Pickup

3 Answers

Dodge ram turns over but won't start


The crankshaft position sensor may have been damaged during the tranny swap. It is on the top right side of the block at the rear of the engine.

May 01, 2009 | 1997 Dodge Ram

1 Answer

WIPER AND HORN FUSE KEEPS BLOWING


check ground wires/ one may be loose there are a few on the engine compartment/ please rate my reesponse thank you very much

Jan 31, 2009 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...