Question about 1997 Nissan Pickup

1 Answer

Broken alt belt. 3 belt system on a 97 nissan pu 2wd XE. Do i need to pull the radiator shroud and fan to install new belt?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Not really, it should be easy to access

Posted on Jul 05, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is my 2005 Nissan Titan overheating in traffic?

Check to be sure that the fan shroud is intact in order to allow the fan to properly draw air through the radiator. Ensure that the radiator and A/C condenser cores are not clogged up with debris that can impede air flow. If these are all okay, you may need to replace the fan clutch as it may not be working correctly.

Sep 06, 2014 | 2005 Nissan Titan

1 Answer

Water pump going out how do i replace it

  • Removal of the Fan Shroud and Drive Belts
    • 1 Drain the cooling system. Place a waste oil collection pan underneath the petcock valve on the lower corner of the radiator. Open the petcock valve to drain the system.
    • 2 Remove the bolts that connect the fan shroud to the radiator core and remove the fan shroud.
    • 3 Loosen the alternator adjustment bolt and slide the alternator toward the engine. Remove the drive belt.
    • 4 Loosen the adjustment bolt for the air conditioning compressor, and slide the compressor toward the engine. Remove the drive belt.
    • 5 Loosen the adjustment bolt on the power steering pump and slide the pump toward the engine. Remove the drive belt.
  • Removal of the Water Pump
    • 1 Disconnect the bypass hose from the water pump by loosening the hose clamp and pulling the hose off the fitting.
    • 2 Remove the bolts that connect the water pump to the engine block, and remove the water pump and engine fan as an assembly.
    • 3 Remove the four retaining nuts that connect the fan assembly to the water pump. They will be located between the fluid coupling and the water pump pulley.
  • Installation of the Water Pump
    • 1 Attach the fan assembly to the new water pump by sliding the pulley then the fluid coupling onto the water pump and reinstalling the retaining nuts.
    • 2 Clean any old gasket material off the water pump mounting surface on the engine block.
    • 3 Place the new water pump gasket on the water pump mounting surface.
    • 4 Slide the new water pump into position and reinstall the mounting bolts.
    • 5 Reconnect the bypass hose by sliding the hose over the fitting and tightening the hose clamp.
  • Reinstalling the Drive Belts and Fan Shroud
    • 1 Reinstall the the drive belts for the power steering pump, air conditioning compressor and alternator. Tighten the adjusting bolts.
    • 2 Measure the deflection of each belt to make sure the belts are properly tightened. Measure deflection by placing a straight edge along the belt against the accessory pulley and the water pump pulley. Push down on the belt and measure the distance between the belt at the midpoint and the straight edge. It should be between 1/2 and 1/4 inch. Any more and the belt needs to be tightened. Loosen the adjustment and slide the accessory away from the engine to tighten.
    • 3 Drop the fan shroud into position and reinstall the bolts that secure it to the radiator.
    • 4 Close the petcock valve on the radiator and fill the cooling system with fresh coolant.
    • 5 Run the engine and visually inspect for leaks.

  • Dec 15, 2010 | 1992 Toyota Celica

    1 Answer

    How do i replace a thermostat on a 96 nissan xe pickup?

    It is located at the enine end of the lower radiator hose inside the metal piece atttached to the engine. the metal piece has 3 bolts to take off that attach it to the engine. I took off the fan and fan shroud for easy access. this is fora 95 xe 4 cylinder.

    Dec 11, 2010 | 1996 Nissan Pickup

    1 Answer

    Ho do i change the alternator on a 95 Nissan maximum V6.?not your normal swap out,! looks like i have to take out the that so?

    No, but you do have to take the fan and shroud off. then you pull the compressor loose and pull forward.

    1. Disconnect the negative battery terminal.
    2. Remove the splash guard on the right side of the vehicle.
    3. Loosen the alternator belt idler pulley.
    4. Slip the drive belt off the alternator pulley.
    5. Remove the four air conditioning compressor mounting bolts.
    6. Remove the radiator fan and fan shroud.
    7. Move the air conditioning compressor forward.
    8. Disconnect the alternator harness connector.
    9. Remove the alternator mounting bolts, and lower the alternator from the vehicle.

    Oct 25, 2010 | 1995 Nissan Maxima

    2 Answers

    Replacing waterpump in1999 nissan pathfinder

    Water Pump Removal & Installation To Remove:
    1. Allow the engine to cool and drain the coolant from the radiator and both engine block plugs.
    2. Remove the fan shroud and both radiator hoses.
    3. Remove the drive belts.
    4. Remove the water pump pulley.
    5. Remove the crankshaft pulley.
    6. Remove the timing belt covers.
    7. Remove the water pump.
    Water pump removal/installation 7924vg20.gif

    To Install:
    1. Install the water pump with new gasket.
    2. Install the timing belt covers.
    3. Install the crankshaft pulley.
    4. Install the water pump pulley.
    5. Install the drive belts and fan shroud.
    6. Install the radiator hoses.
    7. Install the coolant drain plugs.
    8. Refill the cooling system.
    prev.gif next.gif

    Aug 10, 2010 | 1997 Nissan Pathfinder

    1 Answer

    Want to replace the radiator on my 1997 ford thunderbird

    Radiator Aluminum Core, Crossflow — 3.8L (Base) and 4.6L Engines
    1. Drain engine cooling system as described. Disconnect upper radiator hose (8260) and lower radiator hose (8286) and radiator overflow hose (8075) from the radiator (8005). Disconnect the transmission oil cooler inlet and outlet lines from the radiator.
    1. Remove cooling fan motor,fan blade (8600) and fan shroud (8146) assembly as described.
    1. Remove radiator upper bracket retaining bolts and remove bracket. Lift radiator from vehicle.
    1. Position the radiator into the vehicle. Install upper brackets and tighten bolts securely.
    1. Connect the transmission oil cooler lines to the transmission oil cooler fittings.
    1. Install cooling fan motor, fan blade and fan shroud assembly as described.
    Engine Cooling Fan Motor, Fan Blade and Fan Shroud Assembly, Electrical Removal
    1. Disconnect (pull apart) the male-female cooling fan motor wiring connector at the side of the fan shroud (8146). Remove the male terminal connector retaining clip from the fan shroud mounting tab.
    1. Remove two fan shroud upper retaining bolts at the radiator tanks.
    1. Lift cooling fan motor/fan blade (8600)/fan shroud assembly past radiator (8005), disengaging fan shroud from two lower retaining clips.
    1. Follow removal procedure in reverse order.
    1. Tighten fan shroud retaining bolts to 5.2-7.2 Nm (46-63 lb-in).

    2. 10e2638.gif
      8d231fe.gif HOPE THIS HELPS.

      Oct 30, 2009 | 1997 Ford Thunderbird LX

      1 Answer

      I need to replace my radiator on a 04 Nissan Titan 5.6 2 WD, and I would like a diagram showing how to do it.

      From the 2004 Titan Factory Service Manual, You can get one Promanuals. I hope this helps. It's straight forward procedure.

      1. Drain engine coolant from the radiator.

      2. Remove air cleaner and air duct assembly.

      3. Disconnect A/T fluid cooler hoses.
      (Install blind plug to avoid leakage of A/T fluid)

      4. Disconnect radiator upper and lower hoses from radiator.
      Do not allow coolant to contact drive belts.

      5. Remove the lower radiator shroud.
      ( Release the tabs, pull lower radiator shroud rearwards and
      down to remove.)

      6. Remove the radiator shroud upper bolts and remove the radiator
      shroud upper.

      7. Remove the A/C condenser bolts and brackets.
      Lift A/C condenser up and forward to remove from radiator.

      8. Remove A/T oil cooler bolts and oil cooler from radiator and
      position aside.

      9. Lift up and remove the radiator.
      Do not damage or scratch air conditioner condenser and
      radiator core when removing.


      Oct 10, 2009 | 2004 Nissan Titan

      1 Answer

      I need step by step instructions on removing and installing a water pump for a 318 Dodge motor... need torque specs also.

      1. Drain Coolant 2. Take fan clutch off 3. Take fan shroud off 4. Take the serp. belt 5. Take the brace on the A/C and Alt. bracket 6. Take the A/C compressor off the bracket (but do not recover freon) 7. Take the idler pulley off 8. Take the bracket off but leave the alt. attached to bracket 9. Pull the wiring off the temp.gauge on the intake by the tstat housing 10. Take the bypass hose clamps off by using a hose clamp pliers. 11. Take the lower radiator hose off 12. Take the bolts out of the waterpump and take the pump off with a little tap with a hammer or pry it off. 13. Clean off old gasket 14. Install in reverse

      Oct 06, 2009 | 1999 Dodge Ram

      2 Answers

      1997 Nissan Pickup 4 cyl radiator replacement

      Basic mechanical experience is all you need. Remove the intake tube, fan, fan shroud, upper and lower hoses and it comes right out. I think you can do the whole job with a 10mm wrench and a phillips screwdriver. (Maybe a couple other tools, but no special ones.) Be sure to get a 1" core radiator and not the stock 1/2" core, for added cooling capacity.

      Apr 06, 2009 | 1997 Nissan Pickup

      Not finding what you are looking for?
      1997 Nissan Pickup Logo

      Related Topics:

      154 people viewed this question

      Ask a Question

      Usually answered in minutes!

      Top Nissan Experts


      Level 3 Expert

      75822 Answers

      Phil Lovisek
      Phil Lovisek

      Level 3 Expert

      726 Answers

      Colin Stickland
      Colin Stickland

      Level 3 Expert

      22156 Answers

      Are you a Nissan Expert? Answer questions, earn points and help others

      Answer questions

      Manuals & User Guides