Your car uses r134a and can be charged using a kit that contains a quick connect tube and the can of r134a with sealant and oil.
Run the car with a/c on max. fan and make sure the compressor clutch is turning.
Connect the tube with the can to the low side service port which may have a blue cap on it.
Don't worry, the quick connector only connects to the low side port.
Hope this helps.
SOURCE: getting access to the radiator cap on the 2000 mercury sable?
there may be a shield in the way it is just retainers on take out retainers then you should be able to get to cap
SOURCE: how to take off alternatoron a side motor on a 2000 Mercury Sab
disconnect the battery first...and then the wiring harness and remove the two or three bolts. It's pretty easy.
SOURCE: 2000 mercury sable drive belt
For VIN 2 FLEX Fuel:
For VIN U and S....with A/C:
PLEASE DON'T FORGET TO RATE!!!!
SOURCE: 2000 MERCURY SABLE
My 2000 Sable starts blowing hot air about every 6 months. I mean like an oven. All I do is disconnect the battery negative terminal for about 5 minutes. After I re-connect the problem is solved. This solves many problems on this car, it just needs a re-boot. It must be powered by Microsoft (ha ha). Good luck. ps my auto headlamps never did work right either. Dave.
1,302 views
Usually answered in minutes!
×