Question about 1994 Nissan Pickup

1 Answer

Marker lights do not work. 1994 nissan pickup SE

Marker lights do not work. 1994 nissan pickup SE V6 3.0L 4WD.
All marker lights(tail lights, front corner lights) do not work 95% of the time. OK 5%. Gauge cluster lights also do not work. Checked voltage for the marker light at D side tail light. measures 0.18V regardless of light switch position. Will a dead bulb cause all the marker lights to not work? will a loose wire to one light cause all lights to not work? Is there a loose wiring harness hidden somewhere?

Posted by on

  • Anonymous Mar 29, 2014

    at a loss

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,763 Answers

I would start by checking all the fuses, then check the headlight switch,test it for power as you did the tail light, then check the wiring coming out of the cab down the frame to the rear of bed check for a short but if all fuses are good then will not be a short, may be a bad switch and the most important is the bulbs, make sure they are good.

Posted on Jul 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard lights dont turn on as well as tail tights


If you confirm the side marker lights,tail lights,fog lights and/or dash illumination are inop,and fuse number 39 is open,the wire harness is chafed/damaged at either the left or right front side marker lights....Removed both front side marker light and repair the harness wil fix your problem.....Let me know if you find any damaged wire harness

Nov 09, 2013 | 2002 Nissan Xterra

1 Answer

2000 Acura 3.5 RL suddenly has no tail lights or tag lights. Brake, reverse and blinker all work. Checked fuses-all appear fine. Decided to replace bulbs and noticed front right marker light out so changed...


The only thing that both the brake lights and tail lights use is a ground connection. Keep in mind the warning light on the dash may be for any exterior lamp. You may need to check the sockets and grounds on all four corners of the car.

Aug 03, 2013 | 2000 Acura 3.5RL

1 Answer

Taillight fuse location for a 1988 nissan truck. Not sure exactly which one it is under the hood


There is no separate fuse just for the tail lights, if the front marker lights work the fuse is ok.

Jun 29, 2013 | Cars & Trucks

2 Answers

Subaru outback wagon tail light not working off


There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).

The components to check are:

> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch

May 06, 2012 | 1997 Subaru Outback

1 Answer

Change front turn signal


The side marker light must be removed in order to get at the turn signal light.
There are two screws holding the side marker light which is situated above the turn signal.
Open the hood.
Remove the phillips head screw at the top of the side marker light.
Using a long #2 Phillips screwdriver, remove the screw on the outside of the side marker light. This can be seen by looking between the lower side of the side marker light and the top side of the turn signal.
The side marker can be moved.
The turn signal has one screw on the top of the fixture that must be removed.
Slide out the turn signal fixture. There is a small feature on the lower front corner of the turn signal fixture that you must note to properly reinstall the turn signal.
In order to get to the bulb, rotate the bulb socket 1/4 turn CW or CCW. The bulb socket is loose.
The bulb is simply pressed into the socket.
Not sure of the type, but it can be found at your locale auto parts store.
The bulb is used in several places on the 1994 GC, so get apacket with two, if possible.
Assembly in reverse. Be careful not to overtighten the screws as they are replaced.

Mar 29, 2011 | 1994 Jeep Grand Cherokee

2 Answers

I HAVE A 1993 NISSAN PICKUP, TAIL LIGHTS WON'T WORK. AS SOON AS THE SWITCH IS TURNED ON, THE FUSE BLOWS. BRAKE LIGHTS WORK, BACKUP LIGHTS WORK AND THE MARKER LIGHTS WORK. ANY SUGGESTIONS. THANKS


Check any trailer light splices. check bulbs somtimes they can short internally.
If the truck has been in any collisions in the past, take a look at the effected area. front park lights are aleo included on that circuit

Mar 30, 2010 | 1993 Nissan Pickup

1 Answer

We need to know the color code on the wires to hook up tail lights to a trailer.


4 way flat molded connectors allow basic hookup for three lighting functions; right turn signal / stop light (green), left turn signal / stop light (yellow), taillight / license / side marker (brown) and a ground (white).brownwire will run both right and left side markers

Oct 23, 2009 | 1997 Nissan Pickup

1 Answer

Tail lights and dash lights keep blowing fuse when you start it


you have a short somewhere, unplug the tail lamps one at a time and see if the fuse still blows. if you disconnect one and the fuse does not blow and everything else works, the problem is in the tail light assembly. if not, the short is most likely in the wiring harness which can be a bit tricky to diagnose. alldata.com/diy offers one year subscriptions to cars with all the repair info and they have excellent wiring schematics. dont forget to try the front marker lamps in addition to the tail lamps.

Feb 15, 2009 | 1994 Nissan Sentra 4-Door

1 Answer

Side marker lights not working voltage only at left front socket


the front white side marker lights come on with the turn signals to light your way around corners they dont blink they just illuminate the right or left corners the ones at the rear left and right come on with the back up lights,, i have a 86 vette too look for ground wire problems as they are more common on these cars, you may have voltage at the light socket but if its not grounded good no light s

Jul 20, 2008 | 1986 Chevrolet Corvette

Not finding what you are looking for?
1994 Nissan Pickup Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...