Question about 1996 Mazda Pickup

1 Answer

I cant find the location of the speed sensor for a 1996 Mazda B3000 pick up with auto trans

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 6,826 Answers

Look around the auto transmission for wires that lead to the VSS (Vehicle Speed Sensor):


    1. Remove the flywheel to converter attaching nuts. Use a socket and breaker bar on the crankshaft pulley attaching bolt. Rotate the pulley clockwise as viewed from the front to gain access to each of the nuts.
    2. NOTE: On belt driven overhead cam engines, never rotate the pulley in a counterclockwise direction as viewed from the front. Remove the Vehicle Speed Sensor (VSS) clamp retaining bolt . . .
    1. I cant find the location of the speed sensor for a - 89687p11.jpg
    1. . . . then pull the VSS sensor from the transfer case (4WD) or extension housing (2WD)
    1. 89687p12.jpg

    1. Remove the speedometer cable and/or vehicle speed sensor from the transfer case (4WD) or extension housing (2WD).
    2. On 2WD vehicles, scribe a mark indexing the driveshaft to the rear axle flange. Remove the driveshaft.
    1. On 4WD vehicles, remove the transfer case.
    1. Fig. 3: Speedometer cable connection
    2. 85557046.gif
  • Posted on Jul 05, 2010

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
    click here to download the app (for users in the US for now) and get all the help you need.
    Goodluck!

    Posted on Jan 02, 2017

    Ad

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Where is the camshaft position sensor located on a 1994 Mazda B3000


    The Camshaft Position Sensor is located within the Ignition Distributor assembly, although removeable, it is not serviced separately.

    Oct 10, 2011 | 2007 Mazda B3000

    3 Answers

    Where is located the fuel pump for mazda b3000 2003


    Check in the next diagram (click over imge for zoom)...

    zjlimited_1151.jpg

    Fig. Exploded view of the B Series Pick-up fuel filler assembly and pump mounting

    May 01, 2011 | 2007 Mazda B3000

    1 Answer

    Can some one tell me where is Canister Purge Solenoid/Flow Sensor located in my 96 mazda b3000 truck? I have check engine light on, and auto zone guy give me this code P1443.


    It is between the charcoal canister and the intake manifold. It is in a vac line, the same one as the canister purge solenoid. It real close to the battery. I might be able to post a pic if you can't find it.

    Apr 06, 2010 | 1996 Mazda Pickup

    1 Answer

    I have a 99 mazda B3000 2 wheel drive the abs light came on and the speedometer starting acting up where it won't work until I reach 40mph. is it the speed/abs sensor in the back axle


    vice versa.. speedometer started acting up and caused the abs system to disenguage... eratic speedo replace the vss....vehicle speed sensor on transmission

    Sep 03, 2009 | 2007 Mazda B3000

    1 Answer

    What fluid Mazda B3000 automatic


    we use mercon v in the trans of the b3 and b4000 trucks. Mazda recommends that the trans be serviced every 30 thousand miles this will greatly extend the life of the trans

    Jul 10, 2009 | 2007 Mazda B3000

    1 Answer

    My1998 Mazda B3000 4x4 3.0 5 speed idles high almost all the time. It gets worse when coming to a stop and then will idle down. Sometimes it wil rev up to almost 2800 RPM. Avg. idle speed is 900 RPM.


    This sounds like the TPS. Thottle Position Sensor. This controls the idle. Your local Advance Auto Parts should have this part. It should not be that expensive.

    Mar 23, 2009 | 1998 Mazda B-Series

    1 Answer

    Connector for Speed Sensor on1996 Honda Accord Auto Trans.


    If you are talking about just plugging into the speed sensor yes. A VTEC and NON-VTEC are one and the same.

    Dec 13, 2008 | 1996 Honda Accord

    Not finding what you are looking for?
    1996 Mazda Pickup Logo

    409 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mazda Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8518 Answers

    Are you a Mazda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...