At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the wiring: Make sure that all the wires are properly connected to the stereo and to the car's electrical system. Look for loose, disconnected, or damaged wires and repair or replace them if necessary.
Check the fuse: The car stereo may not be receiving power if the fuse that protects it has blown. Check the fuse panel in the car and replace any blown fuses.
Check the battery: If the battery is dead, the car stereo won't receive power. Charge or replace the battery if needed.
Check the ground wire: The ground wire is essential for the proper functioning of the car stereo. Make sure it's properly connected to a clean, unpainted metal surface in the car.
Check the wiring harness: If the wiring harness is damaged or not properly connected, it may prevent the car stereo from receiving power. Replace the wiring harness if necessary.
Mute function: Check if the mute function on your radio or car stereo is enabled.
Volume control: Make sure the volume on your radio or car stereo is turned up.
Speaker connections: Check that the speaker connections are properly connected and secure.
Fuse: If your radio uses a fuse, check to make sure the fuse is not blown.
Antenna connection: If you have an external antenna, make sure it is properly connected.
Radio station reception: If your radio uses a tuner, check to see if the station you're trying to listen to is in range.
Radio or car stereo malfunction: If the above steps don't solve the issue, the problem may be with your radio or car stereo and it may need to be serviced or replaced.
If you have power and ground at the stereo take the stereo back it's broken. If you don't have power at the stereo the wire between the fuse block and the stereo is broken you can follow it back from the stereo until you find the break. You should know that they make harness adapters that just plug in it makes installing stereos easy. I hope this helps. Take care.
The clock is on a seperate electrical circult from the power for the stereo itself. So the clock can work and the stereo could be bad. Get out your owners manual and check the fuses for the stereo first. If the fuses are good check for power to the fuses with a test light.
There is another fuse, probably inline near the stereo. There may also be two positive wires. look in the fuse panel and make sure all fuses are good, if that doesnt help, get an ohms meter and check for power at the rear of the stereo.
you haven't mentioned if that is an aftermarket stereo or a factory one. generally if it is a fuse your cigarette lighter won't work (they often use the same fuse). check the fuse with a multimeter. if it's fine you may have to pull out the stereo and make sure the wires have not come off.
×