Question about 2006 Ford Laser

1 Answer

After replacing my timing belt on my 2002 ford laser 1.6 litre engine, now it stalls, I made sure that all timing marks matched and that all wires were refitted?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 518 Answers

If engine is computer controlled,then it might be a plug connection is loose or in wrong socket

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to mark camshaft on a 1zm-fe engine


Instructions
  1. Check Your Timing Belt
    • Check your owner's manual for the recommended mileage for replacing your timing belt. Replacement for a Toyota Camry is 60,000 miles for 1984 to 1997 models and 90,000 for 1998 to 2004 models.
    • 2Locate the timing belt and examine it for breaks, damage, fraying, worn spots or looseness.
    • 3
    • Inspect the belt for cracked or missing teeth. It's possible that foreign material collected between them.
    • 4Determine if there's damage on both sides of the timing belt. Single-side damage may be caused by the timing belt's guide.
    Remove Your Timing Belt
    • 5Unscrew the bolts to release the lower timing belt cover.
    • 6Disconnect the engine wire protector from the rear belt cover.
    • 7Remove the clamp holding the rear cover's engine wire protector clamp.
    • 8Take the bolts off the front cover and lift it from the engine.
    • 9Line up the crankshaft timing pulley groove with the oil pump by rotating the engine to the right.
    • 10Be sure the camshaft timing pulleys and rear belt covers line up. You may need to rotate the engine one full turn.
    • 11Undo the crankshaft pulley bolt and release the tensioner and dust boot.
    • 12Unscrew the bolts to release the lower timing belt cover.
    Install Your Timing Belt
    • 13Wipe off any oil or water on the pulleys.
    • 14Align the timing belt's front mark with that of the crankshaft timing pulley's mark and the timing belt's installation marks with those on the camshaft pulley.
    • 15Install the pulleys in this order: crankshaft, water pump, left camshaft, No. 2 idler, right camshaft and No. 1 idler.
    • 16Compress the tensioner until the pushrod's holes and housing align. Connect the dust boot to the tensioner then tauten the tensioner's bolts to 20 foot pounds (27 Nm).
    • 17Rotate the crankshaft to the right and line up its timing pulley groove with the oil pump. The camshaft timing marks and those on the rear timing belt cover should match up.
    • 18Put in the timing belt guide and secure the bolts to 21 foot pounds (28 Nm).
    • 19Secure the upper timing belt cover to 74 inch pounds (8 Nm).
    • 20Reinstall the engine wire protector and clamp to the timing belt cover. Replace the lower timing belt cover and secure the bolts to 74 inch pounds (8 Nm).
    • 21Reconnect any remaining items. Start the engine and check that the timing belt is functioning properly.

Nov 05, 2012 | 1998 Toyota Camry

1 Answer

Car hesitates and backfires at lower speeds?


check the firing order of the spark plugs and make sure the number 1 piston is on top dead center and start from that check the marks on the crank shaft pulley if donot match your timing belt(or chain) position is no good and double check all pushing rods.

Sep 22, 2012 | 1998 Ford Escort

1 Answer

Timing belt replacement


Disconnect negative battery cable. Disconnect power
steering reservoir, and remove reservoir bracket.
Disconnect wire harness bracket for Data Link Conne
ctor No. 1. Remove generator and generator bracket.


Remove ABS actuator. Raise and support vehicle. Rem
ove right front wheel. Remove right engine
undercover. Remove power steering drive belt. Sligh
tly jack up engine and remove right engine mounting

insulator.

Remove spark plugs. Remove crankshaft pulley. . Remove right engine mounting bracket.
Remove No. 2 timing belt cover. . Temporarily install crankshaft pulley with pulle
y bolt. Set No.
1 cylinder to TDC on compression stroke. .

Loosen mounting bolt of No. 1 idler pulley and shif
t pulley toward left as far as it will go to reliev
e belt
tension. . Temporarily tighten idler pulley. Remove cranksh
aft pulley and No. 1 timing belt
cover.

If reusing timing belt, mark direction of rotation
on belt. Also place match marks on belt and camshaf
t
pulley. . Remove timing belt from engine.

NOTE:Always turn crankshaft clockwise.

Mar 18, 2010 | 1997 Toyota RAV4

1 Answer

How to time a ford 7.5 litre engine


4e54c51.gif
V8 timing marks

With the Dura Spark II system, only an initial timing adjustment is possible. Ignition timing is not considered to be a part of tune-up or routine maintenance.
With the TFI-IV system no ignition timing adjustment is possible and none should be attempted.
  1. Locate the timing marks on the crankshaft pulley and the front of the engine.
  2. Clean the timing marks so that you can see them.
  3. Mark the timing marks with a piece of chalk or with paint. Color the mark on the scale that will indicate the correct timing when it is aligned with the mark on the pulley or the pointer. It is also helpful to mark the notch in the pulley or the tip of the pointer with a small dab of color.
  4. Attach a tachometer to the engine.
  5. Attach a timing light according to the manufacturer's instructions. If the timing light has three wires, one is attached to the No. 1 spark plug with an adapter. The other wires are connected to the battery. The red wire goes to the positive side of the battery and the black wire is connected to the negative terminal of the battery.
  6. Disconnect the vacuum line to the distributor at the distributor and plug the vacuum line. A golf tee does a fine job.
  7. Check to make sure that all of the wires clear the fan and then start the engine.
  8. Adjust the idle to the correct setting.
  9. Aim the timing light at the timing marks. if the marks that you put on the flywheel or pulley and the engine are aligned with the light flashes, the timing is correct. Turn off the engine and remove the tachometer and the timing light. If the mark are not in alignment, replace the ignition module.
01ff395.gif
Underhood emissions sticker

Nov 30, 2009 | 1986 Ford F 250

1 Answer

Timing belt timing marks, 1997 ford escort where are they?


Ford Escort/Tracer 1991-1999 Repair Guide

REMOVAL & INSTALLATION 1.8L Engine

(see Figures 1, 2, 3 and 4)
  1. Disconnect the negative battery cable.
  2. Remove the timing belt covers.
  3. Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal plate.
  4. Remove the crankshaft pulley and hub.
  5. If the timing belt is to be reused, mark an arrow on the belt to indicate its rotational direction to enable correct re-installation.
  6. Loosen the timing belt tensioner lockbolt and remove the timing belt.
To install:
  1. Temporarily secure the timing belt tensioner in the far left position with the spring fully extended, then tighten the lockbolt.
  2. Make sure the timing marks on the timing belt pulley (crankshaft sprocket) and the engine block (oil pump housing) are aligned.
  3. Make sure the timing marks on the camshaft pulleys and the seal plate are aligned.
  4. Install the timing belt.
  5. Loosen the tensioner lockbolt. Using a suitable prying tool, position the timing belt tensioner so the timing belt is taut, then tighten the tensioner lockbolt.
  6. Turn the crankshaft two turns clockwise and align the timing belt pulley mark with the mark on the engine block.

fbe49f2.jpg
Fig. 1: Timing marks are located on the camshaft pulleys as shown-1.8L engines

5bb74d0.jpg

Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned-1.8L engines

9cafc26.jpg

Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position-1.8L engines

72dc9cd.jpg
Fig. 4: Check the timing belt deflection at the location shown-1.8L engines

  1. Make sure the camshaft pulley marks are aligned with the seal plate marks.
If the timing marks are not aligned, remove the belt and repeat the procedure.


I hope help you with this; remember rated this help. Good luck.

Sep 11, 2009 | 1997 Ford Escort

2 Answers

I need instructions on how to change timing belt on Ford laser 1995 KJ model please


it basically the same with the other engines...as long as you know what parts to remove. Just make sure that before you remove the belt/s and tensioner/, the timing marks are in the right place. I have changed timing belts without instructions...experience is needed though. I suggest better get a service manual to be sure if this is your first time.

Aug 10, 2009 | Ford Laser Cars & Trucks

1 Answer

When the oil is at the add mark how much does its take to fill its back uo to full mark


I to 1.5 litres should do it

Park the truck on level ground and let the engine cool down

Dip the oil then and check the level

Add 1 litre of oil and give it time to drain down into the sump say 15 mins

Dip it again and add a little at a time till you hit the mark.

Jul 10, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

My timing belt broke on my '99 Ford Escort ZX2. Please tell my husband how to replace it. Than k you



 
 
Timing Belt
REMOVAL & INSTALLATION
1.8L Engine
Disconnect the negative battery cable.
Remove the timing belt covers.
Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal plate.
Remove the crankshaft pulley and hub.
If the timing belt is to be reused, mark an arrow on the belt to indicate its rotational direction to enable correct re-installation.
Loosen the timing belt tensioner lockbolt and remove the timing belt.
To install:
Temporarily secure the timing belt tensioner in the far left position with the spring fully extended, then tighten the lockbolt.
Make sure the timing marks on the timing belt pulley (crankshaft sprocket) and the engine block (oil pump housing) are aligned.
Make sure the timing marks on the camshaft pulleys and the seal plate are aligned.
Install the timing belt.
Loosen the tensioner lockbolt. Using a suitable prying tool, position the timing belt tensioner so the timing belt is taut, then tighten the tensioner lockbolt.
Turn the crankshaft two turns clockwise and align the timing belt pulley mark with the mark on the engine block.
Fig. 1: Timing marks are located on the camshaft pulleys as shown — 1.8L engines


 
Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned — 1.8L engines


 
Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position — 1.8L engines


 
Fig. 4: Check the timing belt deflection at the location shown — 1.8L engines

Mar 28, 2009 | 1999 Ford Escort

1 Answer

To remove and replace replace timing belt on a ford laser/mazda


which belt what is it driving powersteering? some times the tensioner pully is acessible from the bottom under the car or hidden at a not so easy place to get ur hands just follow belt and keep looking

Mar 26, 2009 | 2006 Ford Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...