Question about 1999 Jeep Grand Cherokee

1 Answer

Will not come out of first unless relay is pulled, replaced relay still no change. what else could it be?

Posted by on

  • Fernand Luc Bergeron
    Fernand Luc Bergeron Jul 05, 2010

    any chance you got a code from a reader ?

  • rochon_j41 Jul 05, 2010

    no only did this on my own and do not have a reader. it appears that when relay is pulled it goes into 3rd gear but does not change gears even then


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

You will need a code reader if you're doing your own mechanics, it's inexpensive and it will save you hours of testing. disconnect battery for 5 minutes to reset computer and try again. i doubt that it will fix the problem but it free and it might solve it. your computer is getting a wrong signal by one or more sensors, probably speed sensor, and transmitting it to the transmission.

Posted on Jul 05, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 w3500 with iszuzu will not crank unless you pull cover off relay and close relay manually

Check the current wire to the relay, check if it is making good contact trace the wire and check that it has not come loose at the other end. Check the fuses

Aug 14, 2015 | Cars & Trucks

1 Answer

Cooling fan not coming on I can make it come on by turning A/C on the other thing is I can pull the fuse out and the fans come on put fuse back in the fan cuts off please help

Hi Matt ,

In this case if after pulling fuse fan get start it means all the wiring, relay and fan is fine you just need to replace the thermostat/Tempratue sensor sensor, it comes on the radiator.

Yogesh Mule

Jan 11, 2015 | Cars & Trucks

1 Answer

How do i remove a light relay

Yes. The relay should be in a group inside the Powerbox. Unless something bad happened, it should just pull out of its position.

Mar 13, 2013 | Ford Cars & Trucks

1 Answer

The marker lights and the dash lights will not work unless I jump the wires at switch . Replaced both switches and relay under the hood. This happend after I pulled a trailer . This is in a 1993 Chevy...

Most likely the Trailer connector you have wired in is connected improperly or grounding a wire it shouldn't. Take taht Trailer Wire Connection out and that should resolve the issue unless it has shorted out the new switches or the relay.

Aug 11, 2011 | 1993 Chevrolet K1500

1 Answer

Fuel pump will not stop pumping

This sounds like a bad relay, open the hood and locate relay, you will find two relays in the driverside on the fender well, theres a brown and green unless they have been replaced, its a good idea to replace both, ones a fuelpump relay and the other a computer relay. replace them and this should solve the problem, pull one at a time and see if the pump shuts off, good day.

May 05, 2011 | 1987 Ford Econoline

1 Answer

Headlights won't turn off

I checked fuse box under hood and found the right headlamp fuse was burnt. I changed fuse and everything works correct now.

Mar 25, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers


the relay is in the fusebox under the bonnet, turn lights on and pull the relays one at a time till they go off, i have done a couple.
Good luck Davelee

Dec 13, 2008 | 1997 BMW 318

6 Answers

Replace durango blower motor resistor instructions

2003 Dodge durango, the blower motor stoppped came back on and stopped again and never came back on. I replaced the blower motor and still no air. Can anyone help?

Aug 01, 2008 | 2001 Dodge Durango

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides