Question about 1994 Ford Probe

1 Answer

1994 Ford Probe GT Transmission

I have a 1994 ford probe GT Manual shift with 180k miles on it. I recently put fuel injector cleaner in it. After that, the clutch seems to slip every time I try to accelerate quickly. I can't figure out what it is and don't want to have to spend thousands of dollars if it's something as simple as transmission fluid is low. I just need to know the easiest way to check the fluid. If anyone could help that would be great. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 286 Answers

OK..............There is no transmission fluid just clutch fluid. Its in a small reservoir on the firewall. I think you have a worn clutch or it needs the lines adjusted. If the clutch doesn't engage until the pedal it almost at the top then you need to adjust it or replace it. The cleaner you put in is irrelevant to your problem. There is gear oil in the transmission though but that's not the problem either. The clutch cable is easy to adjust, just loosen the lock nut and spin the cable adjuster until the pedal feels right. Hope this helps :)

Posted on Jul 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford probe gt was going down the road, died as i was driving it. will not start


You will need to find out if you lost spark to the plugs or fuel to the injectors to proceed.
Let me know if you need more info.

Jul 24, 2012 | 1994 Ford Probe

1 Answer

1994 Ford probe GT 2.5 automatic, 4eat tranny What cause my transmission to slip from 3rd and 4th when hot? How do you fix the problem ?


It is going bad, it is 16 and anything past 10 years on a transmission is good. You need to get it rebuilt, or swap it for a rebuilt one. Not going to be cheap.

Feb 28, 2011 | 1995 Ford Probe

1 Answer

Im just asking what size the motor for a 1994 ford probe???


A dual-overhead-cam 4-cylinder engine powered base Probes in 1993, developing 115 horsepower. The GT coupe held a 164-horsepower V6, also of dual-overhead-cam configuration. Both engines are Mazda designs. No more turbocharged engines were available. A 5-speed manual transmission was standard; 4-speed overdrive automatic optional. Except for a slight horsepower/torque boost in 1995 for the 4-cylinder engine, and a mild V6 torque increase the year before, powertrains saw no change in this period.

zjlimited_447.jpg

Hope this helps (remember to rate this answer).

Jan 12, 2011 | 1994 Ford Probe

1 Answer

Location of the Fuel Pump fuse in a 1994 Ford Probe GT.


Check fuse box under hood should be mark under side of cap

Mar 27, 2010 | 1994 Ford Probe

1 Answer

1994 ford probe gt fuel cutoff light came on and engine shut down looking for the reset button


check fuses first-- than in trunk drivers side behind flap push reset button

Feb 15, 2010 | 1994 Ford Probe

2 Answers

1994 Ford Probe GT standard transmission - Will not shift into first or second while car is running. Shifts fine while car is off.


Check your slave cylinder Usually located below the brake master cylinder. If there' Fluid you probably need a clutch.

Sep 09, 2009 | 1994 Ford Probe

1 Answer

1994 Ford Probe GT fuel cot out lite


may have to change fuel pump

Aug 10, 2009 | 1994 Ford Probe

1 Answer

1994 Ford Probe takes 2-3 seconds to move


Bad News, your hydraulic pump on your transmission is wearing out. The only solution is a overhaul. I have a Subaru in the same condition, if you can live with it, do it. Just in case check the transmission fluid level.

Jan 10, 2009 | 1994 Ford Probe

1 Answer

94 Ford Probe GT Fuel Cutout problem


VERY Probable! You need to get that Probe to a Mechanic and have it Diagnosed. You can also Purchase a Diagnostic tool for the Computer at Any Good Auto Parts Store and Try this yourself! This is Most Definitally a Computer Error Code Problem.

Jan 02, 2009 | 1994 Ford Probe

2 Answers

95 ford probe se auto. trans. shifts back and forth from 3rd and 4th gear once on hwy. suspect o/d switch or speed/shifting sensors. any ideas?


I own a 1995 Ford Probe SE 2.0L that suffered the same problem. The transmission shop Techs insisted the transmission was blown and needed replaced. After doing some research it turn out to be the Park Neutral Switch also known as a Transmission Range Sensor right below the air box. The part cost 54 bucks. The problem stopped after replacing it. About a year latter the problem came back. After doing some more research it turn out to be the VSS speed sensor. The part cost 57 bucks. The problem stopped after replacing it.

Dec 07, 2008 | 1995 Ford Probe

Not finding what you are looking for?
1994 Ford Probe Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...