Question about 1994 Oldsmobile Cutlass Supreme

1 Answer

How do I tell if I have a WAE of WAD wiring harness code? Thanks

Posted by on

  • gbhjunk Jul 04, 2010

    Yes I need to replace the fuel sending unit. Do you know how it is identified?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 6,826 Answers

If you are talking about the harness on the top of the fuel tank,for the fuel tank,you will have to drop the fuel tank to access the fuel pump harness,if this was at all helpful,please rate,thank you.

Posted on Jul 04, 2010

Testimonial: "Answer the complete question that I could not find anywhere on the internet. Thanks!!"

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Jul 04, 2010

    Yes,there is a tag on the harness on the top,of the tank,this will tell witch code,the tank will have to be removed to see this,but if you rather purchase the fuel pump first,then take your v i n number off the vehicle,divers side top of dash,you can see it threw the windshield ,and take it to NAPA auto parts,they can enter the V I N number and give you the correct fuel pump ,or sending unit,if this was at all helpful,please rate,thank you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 odyssey CKP problem code P0335. I replace the crank seal and this code show up after that. then I open again to replace the sensor and code still there. What I can do? thanks


code p 0335 refers to crankshaft position sensor (CKP)---circuit malfunction===causes ---wiring---CKP sensor ---ECM
the wires are a good place to start and check for damaged insulation , broken wires or bad harness connections
next there is an air gap setting between the sensor and the exciter (segmented bars on a ring) on the crankshaft check that is correct ---dimension available from the workshop manual

Oct 06, 2016 | 2000 Honda Odyssey

1 Answer

Alpine wiring diagram


If you contact Alpine they will be able to tell you if there is an adapter that will plug right into your existing OEM harness. If not then, you'll have to figure out Which wires are which on your OEM harness, here is the Alpine wire code:
Alpine wiring help
HU harness color code pretty much universal.
red=ignition
yellow=battery +
black=ground
blue/white=remote turn on
blue=power antenna
pink/black=audio interupt in (not sure if you have one)
speaker wires
gray=right front
violet=right rear
green=left rear
white=right rear
speaker wire with black stripes is negative.

Sep 29, 2016 | 2011 Dodge Ram Pickup 1500

1 Answer

2000 dodge stratus p1495 code problem


Check your connections on your leak detection pump and vacuum hose to the engine. You will need a scanner to do a wiggle test on the wiring harness this is a common problem.

The code is telling you that you have a problem with the pump.

DTC P1495 - LEAK DETECTION PUMP SOLENOID CIRCUIT
WHEN MONITORED Ignition on and battery voltage greater than 10.4 volts .
SET CONDITION The state of the solenoid circuit does not change.

POSSIBLE CAUSES: Fused ignition switch output circuit open
Leak detection pump defective LDP solenoid circuit wiring harness observable def LDP solenoid ckt wiring harness intermittent def LDP solenoid control circuit short to ground Leak detection pump solenoid control circuit open Powertrain control module defective

Hope helps.

Apr 16, 2012 | Cars & Trucks

2 Answers

What to look for when your ABS light comes on. Is therea sensorthat needsto be replaced. Where are the ABS located on the car. Thanks


Problems with ABS can be frustrating. You have senors on the front wheels, you have wires that run to the sensors, plus you have the ECU mounted to the master cylinder or on the fire wall depends on other options. Now the wheel sensors work like little alternators. Your wheels will have a gear that the senor reads as the wheel turns and then creates an A/C voltage that tells the ECU unit that the wheels are turning. Having a ABS code could mean that wiring to one of the sensors is broken or has fallen off, or is corroded at the plug end. Your ABS system has four major parts the ECU, an ABS hydraulic unit and the wiring harness to the wheel sensors, then last the sensors themselves. Now learn what each part looks like I am posting pictures for you. You will need to check all the wiring harnesses to each part. Then check the sensors. here is the ECU unit --->> e6fbbf8.jpg --->>> Next is the Hydraulic unit.--->>>45dc6de.jpg--->>> Then the wheel sensors. --->>> 3d29687.jpg If you have a multi meter you can read the voltage of each wheel sensor at the other end of its wiring harness. Jack up the front end and find the end of each wheel sensor harness and spin the wheels by hand. you should get a reading on the AC voltage scale of about ..45 volts. not quite a half volt. when the wheel stops the meter should go to zero. spin the wheel and the meter should show voltage. That will tell you if the sensor and the wiring is good. The ECU has no trouble shooting it is good or bad.can't help you there. same with the Hydraulic unit. Most times it will be a wire broken or a bad wheel sensor. Good hunting.

Oct 18, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Need to know what codes 12 and 33 mean,thanks/93 chevy lumina,auto trans.


Code 12 is just a code telling you that you are in the diagnostic mode and it is working. Code 33 is a mass air flow error code. The computer is detecting mor air going into the engine then required at the detected rpm for more than 5 seconds. Could be caused by a faulty connection(wiring harness,ect) to a bad ECM(electronic control module) or MAF(mass air flow) sensor. Also the TPS(throttle position sensor) could be out of adjustment.

Dec 29, 2009 | 1993 Chevrolet Lumina

1 Answer

Need to finish my car but dont know how to get wiring diagrams with listed colors


Robbie, doing a harness overhaul with diagram is a mess, try a salvage yard to find harness you need, or look for one in remanufactured books for your car. I have done harnesses from scratch and can't tell you what a pain it is getting it right and fixing plugs for origional connections. If you find one at salvage take it out yourself so you understand how to hook it up. This is without a doubt the best advice that can be given in this case.

Apr 26, 2009 | Ford Mustang Cars & Trucks

1 Answer

Wireing in car stereo accord 2006


good morning and welcome to fixya.

are you installing the factory radio or an aftermarket radio? you can purchase a wire harness for this vehicle that will plug into the factory chassis harness without cutting the harness connector. if your connector is missing the wires in the aftermarket harness are color coded the same as the wires on the factory side. check best buy or crutchfield.com those guys at crutchfield are really great. good luck and let me know if i can help anymore. thank you




please don't forget to rate this solution

Mar 13, 2009 | 2006 Honda Accord

2 Answers

Kia Amanti 2004 trouble Codes


the p2127 code is an Accelerator position sensor (low input) as is the p(2138) could be moisture or debris in harness plugs. Try using dielectric grease.

Jan 23, 2009 | 2004 Kia Amanti

Not finding what you are looking for?
1994 Oldsmobile Cutlass Supreme Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...