Question about 2006 Pontiac Montana SV6

Open Question

Service traction and/or stability system warning

Message reads service stability system or service traction system. What is the probleM?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 90 Answers

SOURCE: Service stability system message appears

i believe your vehicle has air ride suspension in addition to coil springs. i would check the lines that run from the air pump to the air bags. they will black lines that are located near each strut and will go to a pump that is located somewhere iether underneath the vehicle or inside a fender.

Posted on Mar 23, 2010

Tech jk
  • 102 Answers

SOURCE: service traction system message on dash

This light is usually caused by a problem in the ABS system. A problem in the ABS system will dissable the traction control system. you will need to have the computers scanned for trouble codes.


Tech JK
-------------------------------

Posted on Jan 04, 2009

  • 51 Answers

SOURCE: Service Traction System

it could be a bad ABS sensor or a dirty one or it could be a bad speed sensor both run tration system .have the code read and it well tell you which wheel or if it the transmission speed sensor

Posted on Feb 16, 2009

dj_relly999
  • 4070 Answers

SOURCE: service engine light, service traction warning and

try checking the fuses, u may have a broken fuse. try checking your engine u may have a broken fuel or water hose. check your brake fluids too. hope this helps

Posted on Jul 03, 2009

mitchbtu
  • 121 Answers

SOURCE: I HAVE A 2002 CADILLAC STS. THE BRAKE, ABS, &

On that vehicle each wheel has its own abs and traction sensors... These are generally not something your gonna be able to replace or service yourself... You gonna have to get your mechanic to determine what sensors are faulty, and go from there... Warning these sensors are expensive....

Posted on Jan 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine light blinking and service traction control and service traction stability on message center in 2008 dts cadillac. Help please. Thanks


have the OBD codes read as will pinpoint the faulty sensor/switch , will save you time and money trying to trace fault blind

May 30, 2014 | Cars & Trucks

1 Answer

2001 cadillac deville service system stability


Whenever this warning or any other stays on in the dash it is indicating that the systems control module has detected a fault, it then disables the system as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Sep 19, 2012 | 2000 Cadillac DeVille

1 Answer

How to reset stabilitrak on a 2007 chevy equinox


Your vehicle has electric power steering !
The Electric Power Steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the power steering control module (PSCM), torque sensor, power steering motor rotational sensor, power steering motor, discrete battery voltage supply circuit, and the GMLAN serial data circuit to perform the system functions. The PSCM and power steering motor are each serviced separately from the steering column assembly. However, the motor rotational sensor is serviced as part of the power steering motor, and the torque sensor is serviced as part of the steering column assembly. The PSCM also monitors vehicle speed from the engine control module (ECM) via the GMLAN serial data circuit. At low speeds more assist is provided for easy turning during parking maneuvers. At higher speeds less assist is provided for improved road feel and directional stability.
Stability System Indicator The IPC illuminates the stability system caution indicator when one or more of the following conditions exists. The EBCM sets any one of many VSES-disabling DTCs. The EBCM sends a serial data message to the IPC requesting illumination.
Traction Control System Indicator
TRAC OFF The instrument panel cluster (IPC) illuminates the TRAC OFF indicator when the following occurs:
?€¢
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a serial data message from the EBCM requesting illumination.


?€¢
The Body Control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The Body Control module (BCM) sends a serial data message to the EBCM in order to disable traction control. The IPC receives a serial data message from the EBCM requesting illumination. The BCM sends a serial data message to the radio in order to activate an audible warning.


Your best bet is to take it to a ASE certified an qualified repair shop ,that has the diagnostic tool to fix this problem .

Jun 17, 2012 | 2007 Chevrolet Equinox LS New Cars

1 Answer

HOE TO TURN OFF THE VSC AND TRAC LIGHT OF


Let explain why these warning lights come on and stay on. The VSC/Traction Control system of course is controlled by a computer module, this module constantly monitors the systems inputs, whenever it sees a problem with a signal from any sensor that doesn't match its built in read only memory values it turns on the warning lights to alert the driver that the system has a problem and it needs service. Once a techincian has the car her will tap into the system with a tool called a scanner that reads fault codes that are stored in the control modules memory for whatever problem it detected in the VSC (vehicle stability control) and or the Traction Control system. The warning lights will remain on until the problems that prompted the computer control module to turn them on is corrected. See your local brake dealer for more details on the repairs you might need. It is impossible to estimate cost of repair until the system is tested and the test results looked at by a trained technican.

Sep 19, 2011 | 2004 Lexus ES 330

1 Answer

What does it mean when 1999 Ford Explorer ABS warning light on dashboard comes on?


That means that the EBTCM has detected a problem within the system.The message indicates that a malfunction exists in the stability enhancement feature.

EBTCM (Electronic Brake and Traction Control Module) is an electronic control module that controls and operates the Anti-Lock brake system, Traction Control System and Stability system. If this module detects a problem, it "asks" the cluster to inform you by displaying a warning message.


You should have your car scanned for trouble codes with a scan tool, the Tech2 scan tool is preferred because other scan tools may not communicate with the EBTCM modules.

Hope helps (remember to rate this answer).

Jun 02, 2011 | 1999 Ford Explorer

1 Answer

WHILE DRIVING DOWN THE ROAD THE ABS LIGHT CAME ON ALONG WITH THE TRACTION CONTROL LIGHT.WE BEGAN GETTING A SERVICE TRACTION CONTROL SYSTEM,FOLLOWED BY SERVICE STABILIZATION SYSTEM,FOLLOWED BY SERVICE ABS...


All are tied into the ABS system, traction as well as stabilization, This needs to be looked at by someone who can hook up a diagnostic tester to read the fault codes stored in the ABS system then perform the correct diagnostic procedures to isolate the problem

Jan 03, 2011 | Buick LaCrosse Cars & Trucks

1 Answer

2004 Tahoe with the following indications service tire monitor warning service stability warning abs light TC disabled Seems to have all happened at once!


It is a problem with your abs this will cause traction and stability to turn off as they work off abs system. need to have scanned for codes. ebcm is common about going out on these

Oct 12, 2010 | 2004 Chevrolet Tahoe

1 Answer

2004 Tahoe traction/control light


You need to get the vehicle scanned for codes, once you have the codes you can determine the severity of the issue

Jul 29, 2009 | Chevrolet Tahoe Cars & Trucks

Not finding what you are looking for?
2006 Pontiac Montana SV6 Logo

Related Topics:

1,034 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...