Question about 2002 Nissan Altima

2 Answers

I would like to use a 2004 mass air flow sensor on Altima 2002. Wath is the difference between connector, power etc ? Thx, Daniel

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 736 Answers

Here is what the 2003 to 2006 maf looks like
http://www.autopartswarehouse.com/details/QQNissanQQAltimaQQHitachiQQMass_Air_Flow_SensorQQ20032006QQW0133-1722274.html

the 2002 is different .. here is what it looks like
http://www.autopartswarehouse.com/search/?Nr=AND(part:Mass+Air+Flow+Sensor)

did you try cleaning your old one .. there are places that will refurbish the old ones ..

Posted on Jul 04, 2010

Testimonial: "Good link for image comparison"

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 312 Answers

You can get that answer from your parts store. They can tell if the two cars have the same part number for the MAS

Posted on Jul 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of Air Flow Sensor 2004 Nissan Altima 2.5L SE


IF you mean the mass air flow sensor its on the air box

May 07, 2016 | Nissan Cars & Trucks

2 Answers

What is the fuel flow rate for a nissan altima 2001


Have to look up the specs

In general you need about 16 oz (Volume) in 15 to 20 seconds

Nov 30, 2014 | 2001 Nissan Altima

3 Answers

2003 Nissan Altima 2.5L Service Engine Soon Light is on, Auto Zone says codes are for MAF and O2 Sensors. Car hard to start after driving a while but when starts appears to run smooth. Auto Zone thi


ok lets start with the codes they say your getting. P??? which 1's and how many. there are few o2 sensors, are they next to the Exhaust next to the converter? MASS AIR FLOW -MAF use this, for now i am guessing, until i see the correct codes your are getting. this could be the 1 you may have below, please read it........
  • P0103
    Mass Air Flow Sensor Circuit High Input
  • Possible causes
  • Faulty mass air flow sensor
    - Intake air leaks
    - Dirty mass air flow sensor
    - Dirty mass air filter
    - Mass air flow sensor harness is open or shorted
    - Mass air flow sensor circuit poor electrical connection
  • Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.
  • possible symptoms Engine Light ON (or Service Engine Soon Warning Light)
    - Engine stall
    - Engine running rough
    - Excessive fuel consumption
    - Excessive smoke
  • the code is generated when An excessively high voltage from the sensor is sent to Engine Control Module (ECM).
2003 NISSAN Altima Sedan OBDII Codes List

Oct 22, 2014 | 2003 Nissan Altima

1 Answer

Would a problem be caused to use a 2003 Suzuki Esteem Mass Air Flow Sensor on a 2002 since it seems to be working great


They have to be exactly the same part electrically,etc

No way to know that unless the part number & application is the same

Your cars pcm won't have proper air flow readings if you don't
have the correct sensor

Are they the same,Don't know,that is up to you to research

Dec 17, 2012 | Cars & Trucks

1 Answer

2000 nissan sentra 2.0 error codes p0101& p0102


P0102 - Mass Air Flow Sensor Circuit Malfunction

The mass air flownissan-maxima-maf-sensor.jpg or MAF sensor is placed in the intake air duct between the air filter and the engine intake manifold. The MAF sensor measures the amount of intake air flow. The MAF sensor converts the air flow measurement into a voltage or frequency signal, with the voltage or frequency changing proportionally to the amount of air flow. The air flow sensor signal is monitored by the engine computer (ECM). The engine computer (ECM) uses the mass air flow signal to know the engine load and to calculate the proper amount of fuel injected. If the signal from the mass air flow sensor is out of expected range, the ECM detects a fault and sets the code P0100. For example, the mass air flow sensor signal could be higher than expected when the engine is not running or lower than expected with the engine running. A car with the code P0100 may have some driveability issues, such as stalling, lack of power, surging, hesitation, etc. In some cars, the code P0100 can cause the fail-safe mode where the engine speed would be limited to 2,500 - 3,000 rpm.
If there are other trouble codes present, they might need to be looked at first. Checking the freeze frame may help, as it may contain some important information. The freeze frame is a snapshot of the engine parameters at the moment when the fault was detected. The freeze-frame may show whether the vehicle was running or stopped, whether the air-fuel ratio was lean or rich, was the engine was cold or warmed up at the time of the malfunction. Read more about the freeze frame.


Read more about mass air flow sensor.

What could cause the code P0100:
- faulty or contaminated mass air flow sensor
- open or short in the mass air flow sensor electrical circuit
- open or short in the sensor power or ground circuit

- other electrical problem with the MAF sensor wiring, (corroded wires, bent terminals, bad ground connection, burned fuse, etc.
- vacuum leaks
- restricted air flow at or before the air filter
- wrong air flow sensor installed
- problem with ECM





P0102 - Mass Air Flow Sensor Circuit Low

The mass air flow or MAF sensor measures the amount of air entering the engine. The engine computer (ECM) uses the mass air flow signal to calculate the amount of fuel injected (read more how the MAF sensor works below). The code P0102 is set when the signal from the mass air flow sensor is lower than expected. Often a car may exhibit some driveability symptoms, such as lack of power, surging, hesitation on acceleration, hard starting, pinging (detonation), or rough idle when started cold. Often the codes P0171 or P0174 could also be stored along with the code P0102, as the incorrect air flow signal can cause the engine to run lean. The codes P0171 and P0174 indicate a lean condition. Checking the freeze frame might help in the diagnostic process. The freeze frame is stored in the ECM along with the trouble code. The freeze frame contains some recorded parameters (e.g. vehicle speed, engine temperature, fuel trim) at the moment when the fault was detected. The freeze frame can also be accessed with a scan tool.



What could cause the code P0102
- faulty or contaminated mass airflow sensor
- debris blocking the air flow at the mass air flow sensor
- unmetered air leaking past the MAF sensor (vacuum leaks)
- PCV system vacuum leaks
- restricted or collapsed intake air duct
- dirty or restricted air filter
- restricted air screen before the air filter
- improper application of aftermarket components (e.g. cold intake, modified air filter, etc.)
- wrong air flow sensor installed
- electrical problem with the MAF sensor wiring, connector, power supply or ground.
- problem with ECM
- in some cases other issues with the fuel injection system like a clogged catalytic converter or a faulty manifold absolute pressure sensor (MAP) can also cause the code P0102.




Solution for MAF repair

Oct 20, 2012 | 2006 Kia Sorento

1 Answer

2004 s40 ,,,,po103


P0103 - Mass or Volume Air Flow Circuit High Input

Possible causes- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor

Sep 17, 2012 | 2004 Volvo S40

1 Answer

P0103


P0103 MAZDA - Mass Air Flow Sensor High Input Signal Possible causes - Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks
- Faulty mass air flow sensor

Mar 07, 2011 | 2004 Mazda MPV

2 Answers

Were is the IAT in a 2004 nissan altima


Removal and Installation To Remove:
  1. Remove or disconnect the following:
    • Mass air flow sensor electrical connector
    • Tube clamp at the electronic throttle control actuator
    • Air cleaner to electronic throttle control actuator tube, upper air cleaner case
    • Mass air flow sensor from the cleaner case.
To Install:
  1. Install or connect the following:
    • Mass air flow sensor to the cleaner case
    • Air cleaner to electronic throttle control actuator tube
    • Tube clamp at the electronic throttle control actuator
    • Mass air flow sensor electrical connector
prev.gif next.gif

Mar 28, 2009 | 2004 Nissan Altima

1 Answer

2002 elantra gt stalled @ hwy spd. now has no spark.


Too many possible causes (fuel, fuel pump (pressure, injectors, etc), ignition, crank sensor, Mass Air Flow Sensor, Coolant Temperature Sensor, ECU, etc.

Mar 18, 2009 | 2004 Hyundai Elantra

3 Answers

Stalling Toyota Camry 2004


P-0102 and P-0113 are mass air flow and intake air temp codes, the P-0136 is an Oxygen sensor code. Before you do anything, check for debris in the Mass Air Flow Sensor, it's small black box with electrical wiring connector that is screwed into the intake air tube, between the air box and the intake manifold. Undo the screws, remove the sensor, and, with a flashlight, and look down inside it for debeis, or broken wires inside it. If it's dirty, it could throw a P-0136...Comment back on what you find; hope this helps, and thanks for choosing FixYa!

Oct 24, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
2002 Nissan Altima Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...