Question about 1988 Mitsubishi Mighty Max

1 Answer

I drained out the wrond fluid

Where does the transmission get drained on a mitsubishi 1988 pickup truck, i think i let the wrong fluid out im trying to figure out what fluid i let out?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 6,826 Answers

The transmission is bolted to the engine and if you drained fluid from a single drain plug, you probably drained the engine oil out, especially if it was black.

The transmission fluid, if Dexron II or equivalent, is red in color.

Check the fluid level of your engine to see if you drained the engine oil by mistake.

Usually, transmissions have several everal bolts that hold the drain pan and filter on.

Good luck, to you.

Posted on Jul 04, 2010

Testimonial: "thank you"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 Toyota 5 speed manual w series transmission will only engage 4th gear. Why


Did you check the transmission fluid level? if it is OK, then you need to have a transmission specialist look into this.

Feb 27, 2015 | 1988 Toyota Pickup

1 Answer

What type if transmission fluid is used for 1988 Toyota truck 5 speed fuel injected


80w90 but have heard people putting 15w40 in it in real cold weather because the gear oil gets real thick in extremely cold temps.

Mar 28, 2014 | 1988 Toyota Pickup

1 Answer

Where do i check it the transmission fluid.


manual or automatic gearbox please --- correct year as well will help it shows a 1988

Jan 30, 2012 | 1988 Mitsubishi Pickup

1 Answer

Where is transmission filter located in 2001 mitsubishi diamante located and how do i change it?


transmission filter in the bottom of transmission bolted to valve body.you need a large drain pan.place drain plug under transmission oil pan.remove transmission oil pan drain plug.let all transmission fluid drain out then screw back drain plug in oil pan.then you need to remove transmission oil pan then remove filter and replace pan gasket also.make sure you have right amount transmission fluid on hand.buy extra because if you short of fluid you cant drive car if fluid level too low.make sure you get the right amount fluid.torque pan bolts to 96 inch pounds.

Nov 10, 2011 | 2001 Mitsubishi Diamante

1 Answer

How much transmission fluid does a 1988 Toyota pick up take?


With automatic transmission model A43D (14 bolt fluid pan)

Note :
A43D transmission Service change only - 2.5 quarts.

Total refill - 6.9 quarts.

Oct 05, 2011 | 1988 Toyota Pickup

1 Answer

How do you check the transmission fluid in a 1988 dodge dakota pickup with a manual transmission


It has two square plugs on the side if the tranny, fill it till it runs out of the top plug. The bottom one is for draining it.

Jul 17, 2011 | Dodge Dakota Cars & Trucks

1 Answer

Where do i check transmission fluid for 1989 isuzu pickup and how do I drain and refill fluid?


Hi, Generally, the transmission dip-stick is located in the rear of the engine compartment by the firewall. Unfortunaltely, the only way to drain old transmission fluid out is to remove the transmission pan on the bottom of the thrans itself. Be careful because it is a very messy job. Good Luck!

Jan 10, 2011 | 1989 Isuzu Pickup 2WD

1 Answer

Clutch has no pressure when you push it in to change gears sometime you can pump it hard it will go in good then iit goes to the floor again what could be wrong


Put morw brake fluid in clutch master cylinder, pump clutch paddle, look under car for leak, if no leak replace clutch master cylinder, not holding pressure.

Jul 20, 2010 | 1988 Mitsubishi Pickup

2 Answers

1988 Dodge Ram 4x4 pickup


dodge uses e solenoids to shift the trans.I am not sure on an 88 but this sounds like why it acts up when drained.
repair your charging system and should be fine

Aug 26, 2008 | 1988 Dodge D-Series Pickups

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...