Question about 2007 Saturn ION-2 Quad Coupe

1 Answer

Will not start, have power - 2007 Saturn ION-2 Quad Coupe

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saturn Master
  • 6,826 Answers

Maybe a starter is bad or solenoid on the starter is bad. Have checked by Walmart or parts store to pinpoint problem.

Posted on Jul 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is my 2004 mercury monterey wont start and before that the power sliding door stop working?


If door is open , interior lights may be on and killing the battery. The door switch may be bad and that may be why the door wont close.

Mar 16, 2017 | Mercury Cars & Trucks

1 Answer

Will not start, no click from starter, like its getting no power, but I have checked and pwr at ignition and pwr at starter but nothing but if I turn ignition on and jump solenoid it will start up !!


If under your own power source, vehicle is not starting...
then you connect an alternate power source, and it starts (as you said - right up) then your power source is bad!
Power Source = Battery

Jun 09, 2015 | 2000 Hyundai Accent

1 Answer

When i turn key to start dash lights come on but does not turn over is there a fuse or would it be the starter


You are going to do a few tests before we can say a starter failed. First do you hear a loud click in start position? If not go to starter and test for power. Large post should always have power. Small wire should have power in start position . If no power to small wire ,you're going upstream to neutral safety switch and ign switch. If it's getting power in start position, have someone hold in start position and tap on starter with a hammer. If it starts replace starter. If still no startcheck battery,ground cable for failure

May 03, 2015 | 2006 Nissan Xterra

1 Answer

Wont start no power


the order is ( no M/T tranny and push starting,,,, its an A/T right?)
1: cranking, it must crank or it can never start.
2; start, does it start.
3: power, if it can start , the engine is dead, there is no power.
my guess is its #2.

so here goes. with scotty, posted 100 times now..
"cranks but wont start he says"

http://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

Dec 05, 2013 | 1991 Honda Accord

1 Answer

1978 dodge power wagon will push start but only will turn over with key and not start replaced all the ignition components. :


1978 ,you have no power to the coil with ignition switch on ,if you have power then check it with the ignition switch in start position as sometimes the switch packs up and no power to the coil in start position

Oct 11, 2013 | Cars & Trucks

1 Answer

Will not start,OR CRANK, NO NOISE


Do warning lights and gauges come on, when key is turned to on?
If yes, check for power on the small wire at starter solenoid mounted on the starter with the key held in start. If power at the solenoid, take starter off and test for a bad starter or solenoid. If no power at solenoid when key held over to crank, work back to the switch in the start circuit-starter relay, clutch or neutral safety switch,-power from the start wire out of switch is not getting to the starter solenoid.
If no warning lights or gauges work with key in on position, power is either not getting to switch (bad maxi-fuse or fuse link, or bad battery connections-clean and tighten, recheck)-or the switch itself is not sending power out. Check if battery is charged up. Check all connections and grounds for loose, poor connections.
The start circuit starts at the battery, then to ignition switch, then out of ignition switch on the start wire to the clutch switch (or neutral/park on automatics), and on , ending at the starter solenoid on the starter. Somewhere in your starting circuit, power is lost. Start at the battery-check charge, check connections, check ignition switch.

Aug 25, 2013 | Cars & Trucks

1 Answer

2005 Saturn Ion 2 Problems: It wont turn over or anything no noise etc.. Replaced the ignition switch and nothing. Starter checked out. So what could be the problem?


With key on, do the warning lights and gauges come on? If yes, next is to check the start wire from ignition switch to the starter solenoid. The only time this wire has power is when the key is held in start. One could pull off the small wire at the starter solenoid on the starter, and check if it has power with the key held in start. If it does have power, may be a problem with the starter solenoid. But if no power on that wire, you will have to trace the wire from switch to starter. Not a direct path to the starter though. There is a park/neutral safety switch that the wire has to pass power through, so in park or neutral you would have power in and power out of the switch. If you have a manual transmission, substitute a clutch safety switch (or clutch inter-lock switch) for the park/neutral switch. If you have this, easy to check for power in/power out of the switch, with clutch pedal depressed and key held in start.
There is also likely a starter relay in the circuit. If you can find it and if you have a test light or voltmeter, you can do some checking here to see if your start wire still has power. Pull the relay out, key off. See if any terminals the relay plugs into has power. May or may not, depending on how the wiring is set up for the relay. But now if you hold key in start and check all the terminals, there should be at least one (maybe two) terminals that have power, where they didn't have before. That tells you the power is still getting out to this point.
If you have a theft deterrent system, and it is activated, at this relay is where it may come into play-not letting power pass through to the starter solenoid on the starter.
Sorry I do not have a wiring diagram so could give you more specifics. Hope you kind of get the picture, though. Large maxifuses pass power to the ignition switch. The switch sends the power out as demanded. The start wire out of the switch going through the start circuit to the starter solenoid only has power when the key is held in start.

Aug 16, 2013 | Cars & Trucks

1 Answer

Bmw 1999 323i has power but no reds on the dash


Does the engine turn over when you try to start it? Or is it just dead silent? Your engine requires a lot of power to start, where the lights on your dash/etc require very little power. It's not uncommon for the battery to be able to power everything in the car but not have enough power to start the engine. Check the voltage at the battery when you're trying to start it. it should be around 12 volts. Try a jump start if you don't have a voltmeter. If it starts when hooked up to another cars battery then your battery is the problem.

Mar 14, 2013 | 1999 BMW 323 Series

2 Answers

92 grand marquis wont start just clicks when trying to start it battery is good starter is good relay is new. what else could be the problem


Make sure the connections to the battery are clean,and the battery post,no grey,or black residue ,this acts as an insulator.Check the ground connection,to the engine.

Mar 10, 2010 | 1992 Mercury Grand Marquis

1 Answer

2000 camry will not start


You need the check for power at the solenoid wire (small wire) on the starter while turning the key to start. If there is power during start you have a bad starter. If there is no power at start, try staring it with the shifter in neutral. If there is power then, your neutral safety switch is either bad or needs adjustment.
I'm assuming all your battery connections are tight.

Apr 11, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
2007 Saturn ION-2 Quad Coupe Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...