Question about 1995 Nissan Maxima
How do you change the license plate light?
The lens cap is only a push fit,use a small flat blade to prise it out(be carefull not to scratch paint...)
Posted on Jul 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There's no need to take the whole back panel off to do it, the light cover on the bulb twists out, and it might take some elbow grease to twist it, then the bulb is easy to change.
Posted on Jun 10, 2008
SOURCE: change oil light remains on
To reset the Change Oil Light:
Open driver's door and open fuse access panel
Turn ignition key to on (don't crank the starter) Push reset button located in fuse panel When Change Oil Light starts to flash Press and hold reset button until it beeps and light goes off Repace panel
Posted on Sep 21, 2008
OK>>> it is very cold here, but nonetheless..I went outside to check on my Oldsmobile for your benefit....On mine (I can't guarantee it is the same for all of the vehicles listed above). If you are looking at the license plate, LOOK UP and you should see the bulb and whatever encasing is there. Mine is in a tube and it is attached with (2) mini bolts that will need to come out first, then it just looks like a simple matter of disconnecting the electrical plug, taking out the old bulb and putting the new one in. I hope this helps someone....
Posted on Feb 23, 2009
The licence plate lights are in the same line as your tail light wiring assembly. I assume your tail lights are working or you would have got a ticket for that. The wire is either cut, broken or unhooked from the tail light wires (which usually are brown). If you can not find the problem, you can always run a new wire to the tail light wire from your licence plate wire. Then they should work.
Your other problem is that the license plate ground is rusty & not grounding, which would also not let them work, so you should probably check that first. Rick
Posted on Apr 14, 2009
Tips for a great answer:
Jan 24, 2016 | Cars & Trucks
Jul 09, 2013 | Cars & Trucks
Nov 04, 2012 | 2004 Toyota Prius
Apr 12, 2012 | 2007 Audi A4 Convertible
May 15, 2010 | 2008 Chevrolet Malibu
Jun 06, 2009 | 2000 Lincoln LS
May 23, 2009 | 2005 Chrysler 300
Mar 16, 2017 | 2005 Nissan Frontier
184 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: