Question about Volkswagen Microbus

1 Answer

Hi got a 1993 2.4 non turbo 5 speed manual i had the front end of the gear stick come out of the bearing block got a new bearing block and was told to replace the gear control leaver and all the rod ive done the large rod with the 2 plastic balls on new bearing block but not the road as there seems no play. i can not get reverse gear when using the gear stick but if some one pushes down on the gear box selector it will go in to reverse and help would be great thanks neal

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

You have the wrong lever try mesure the shifter assemblies if they are not the same then find a different shifter also replace the spring that shoves the stick back up.

Posted on Jul 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 suzuki grand vitara 2.0 5 speed what speed sensor do I need and what colour


easter egg hunt 1million
Car speed?
or ABS speed sensors. we cant guess, whats wrong, can we.?
USA car,? we are USA, cars not here are vastly different.
so........????????
why ask not telling problem? scans told you sensor is bad
post the DTC error. speedo dead.Odom, dead? what?
J20 engine ,
5 speed stick shift box. manual trans,,m/t
4wd or 2wd?
toss coin NOT ABS sensors.
there are 2 speed sensors ill do all 3 permutations of car
4wd one or tail of transfer case
2wd one on tail of 5speed box.
any, the backup speed sensor in the speedometer cluster
89-98 years and was deleted 1999, usa.

why ask ,tell why. so we can be on the same page and
not have to document all the above.

color is of on concern, only correct part numbers matter !!!

colour (non usa spelling) is my only real useful HINT.
never said speedometer fails. or odometer fails
the trans is manual so no speed sensor needed ever there to shift automatially,its a stick

scan it yet.?
THAT BE FIRST.

i looked at our 1999 usa GV . serv. man
best i can tell speedo has new electronic head.
no speedo cable. first year, in fact. (i owned a 97 and 04)

so when VSS goes dead (say)
the speedo goes dead
odom goes dead
and ECU sets DTC errors for VSS dead.
3 clear symptoms.
some cars have different VSS1 to match, axle gears.
the vss gear on end .

on newer cars with stick shift
like mine now
the aBS sends speed to PCM
so there is no transmission speeds sensors at all , 6sp, m/t
so lacking symptoms, me bollixed.

Feb 28, 2017 | 1999 Suzuki Grand Vitara

1 Answer

How do I build/repair a damaged wiring harness for a 1984 VW Jetta GL 1.6L non-turbo diesel 5 speed, manual steering?


You could try to just cut out the bad part and solder in the new wire to the good part of the old. Also clean up the affected area.

Jan 27, 2015 | 1984 Volkswagen Jetta

1 Answer

Gear speeds


you may have a bearing in the trans that has failed allowing the main shaft to sag

Jul 20, 2013 | 1993 Mazda Protege

1 Answer

Hello i have a 1993 ford f350 4x4 with the 7.3L non turbo diesel and 5 speed manual transmission. my front driveshaft just gave out on me at this wierd looking end where it meets the transfer case. what is...


I work in an automotive recycling yard. I can only think of either the yolk, or the universal (u) joint. There's usually a slip yolk in the middle of the shaft to compensate for the front end travel (up and down). In any event, you can Google images to clarify what part you're referring to. You can also look for the shaft, or front yolk near you by searching Car-Part.com. If it's just the universal joint and the yolk isn't damaged, you can replace just the u-joint. I hope I've helped. If so please rate my assistance and leave a testimonial. There's only just so much information I can offer without direct communication. Thank you for using Fixya.

Jan 27, 2011 | 1993 Ford F350

1 Answer

How do you know what ratio a subaru wrx gearbox is if it doesn't have a trans code sticker on it?


This information is from my genuine service manual. I hope it is of help.
Non-turbo
Turbo
Sedan Wagon
Type 5-forward speeds with synchromesh and 1-reverse
Transmission gear ratio
1st 3.454 3.454
2nd 2.062 1.947
3rd 1.448 1.366
4th 1.088 0.972
5th 0.780 0.738
Reverse 3.333
Front reduction gear Final
Type of gear Hypoid
Gear ratio 4.111 3.900
Rear reduction gear
Transfer
Type of gear Helical
Gear ratio 1.000 1.100
Final
Type of gear Hypoid
Gear ratio 4.111 3.900 3.545
Front differential Type and number of gear Straight bevel gear (Bevel pinion: 2, Bevel gear: 2)
Center differential Type and number of gear
Straight bevel gear
(Bevel pinion: 2, Bevel gear: 2 and viscous coupling)
Transmission gear oil GL-5
Transmission gear oil capacity 3.5 2 (3.7 US qt, 3.1 Imp qt)

Mar 21, 2010 | 2007 Subaru Impreza WRX Sport Wagon

1 Answer

5 speed manual transmission. reverse will not engage


I had the same problem. A spring in the gear change selector had broken making it impossible to get into reverse and very difficult into first to fifth. Simple repair. Might be similar to your problem

May 03, 2009 | 1994 Saab 900

2 Answers

Hard to get out of third gear and have lost fourth


your three-four synchro or you need a new clutch, hope it's the clutch, the synchro will cost alot

Dec 25, 2008 | 1993 Mitsubishi Mighty Max

1 Answer

Transmission


1993 and 1994 manual 5 speed front wheel drive are the same....

Sep 15, 2008 | 1994 Eagle Talon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...