Question about 1989 Ford Bronco

1 Answer

What type of oil should be used in a 1989 ford bronco

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Depends on how many miles it has on it, I prefer High mileage castrol GTX 10/40 Detergent for most v-6 motors or I will use the synthetic oil to get longer life out of it.If it is low mileage then you can use castrol 10/30 or Mobil oil 10/30 or Texaco 10/30 or 10/40 depending on mileage. If it has a lot of miles on it the lower viscosity will cause it to burn or leak oil.

Posted on Jul 04, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuse box diagram 1989 ford broncoll 2.9l
site showed fuse box legend. I don't know if accurate? At the site register the vehicle, it's all free, In the site search box, upper left, type in fuses, go, then on the right side of page, click on the link, should be fuse box on that page. I was afraid to cut and paste, thought it would be too small to read.

Mar 14, 2016 | 1989 Ford Bronco II

1 Answer

89 ford bronco 2 it i turn the key on and it starts then it just dies after 2 sec

I think this may , just may , be a coil failure , the oil insulation breaks down as the heat increases , whuch allows the system to work until the oil reaches it critical temperature
Check the coil !
its a guesolution ?

Aug 05, 2013 | 1989 Ford Bronco II

1 Answer

Transfer case oil level

The oil specification for the transfer case in a 1984 Ford Bronco II is "Automatic Transmission Fluid, DEXRON II"

DEXRON II is pretty hard to find these days, so DEXRON III or MERCON III can also be used.

Jun 09, 2012 | 1984 Ford Bronco II

1 Answer

Does a torque converter for a 1989 ford bronco trwo have antyhing to do with a fly wheel

The torque converter bolts to the flex plate at the rear of the engine. It supplies the link between the engine to the transmission.

It's known as a "Flex Plate" and not a "Fly Wheel". The flywheel is use on a standard transmission.

May 14, 2010 | 1989 Ford Bronco II

1 Answer

Timing setting for a 1989 ford bronco

10 degress before top dead center

Jun 17, 2009 | 1989 Ford Bronco

2 Answers

Firing order for 1989 full size ford bronco 302

13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front

Apr 22, 2009 | 1989 Ford Bronco

1 Answer

Ford Bronco II standard tran. Has no 1st or 2nd gear.

Replace the transmission fluid. I think those used ATF, but check to be sure. (if you made the mistake of using 80/90w drain it...those transmissions were not designed for 80/90w. gear oil)

Dec 02, 2008 | 1989 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides