Question about 2008 Ford Fusion

1 Answer

When tring to start dash light flash and clicking noise but head light stay bright

Posted by on

  • nhcrouthamel Jul 08, 2010

    I WILL CHECK THE DAYLIGHT /RELAY, BUT HOW WOULD THAT KEEP THE CAR FROM STARTING?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

Daylight switch/relay to test

Posted on Jul 04, 2010

  • Fernand Luc Bergeron
    Fernand Luc Bergeron Jul 09, 2010

    you are right, it has nothing to do with the car starting. if i understand correctly, you engine doesn't start over at all. first, you need to check the ignition fuse. next, test your fusible link, if any, between the positive post of the battery and the starter. the best way to do that is to bypass it with another wire. let me know how that turns out please.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A licking noise starts when the car stops in the front dash then the battery goes dead by the next morning even with new batteries


licking? my guess, clicking?
this question could get lots of banned answers, watch out.
car stated is this a World war 2 jeep (willis?)'
no year,?
no country.? they sell them and make them outside usa,

the car for sure needs service, the only thing active is head lamps
key off, (and horn and alarm)
1: does the car drive? ok.
2: do the head lights work and glow bright.
3: when you do drive is the CEL lamp in the dash glowing (check engine light)
any way its an electrical failure. if car drives ok...
my guess, HVAC controls messed up.
or a damaged Ignition key switch.

Nov 24, 2016 | Jeep Cars & Trucks

1 Answer

Bright lights switch won't stay on bright on my


Are you pulling up on the switch and the bright lights just flash and if so you need to push the arm toward the dash and it will stay on.
Good Luck

Sep 14, 2014 | 2002 Chevrolet Monte Carlo

1 Answer

Won't start only light that came on was check engine


No that would not cause it to not start. The engine light will usually be on until the car starts. It sounds like it could be a couple things. Does the car make any noises like the starter trying to engage or solenoid clicking when you hit the key? It could be a dead battery, could be that the shifter is not pushed firmly into park, I have had to move them into gear then back to park to get it to start. Try putting it in neutral, while holding the brake pedal (preferably with parking brake set) and trying to start it (assuming it is an automatic). Do your headlights come on and if so are they as bright as usual? If so then you can most likely rule out dead battery or bad connection.

Jan 17, 2014 | Pontiac Cars & Trucks

1 Answer

Alternator making noise had it checked out it passed the test got new battery other one was drained now dash lights get bright and dim really fast


The most common thing which fails in alternator and create noise is bearing failure. I think you should check for that once.

Performance Product Store

Nov 07, 2012 | 2004 Chevrolet Blazer

1 Answer

1992 ddome light would not go off


DOME LIGHT STAYING ON BECAUSE YOU HAVE BAD DOOR SWITCH OR BRIGHTNESS SWITCH ON HEADLIGHT SWITCH THAT CONTROL DASH BRIGHTNESS AND IF BRIGHTNESS SWITCH IN FULL ON POSITION ON HEAD LIGHT SWITCH IT WILL CAUSE DOME LIGHT TO STAY ON.

Aug 11, 2011 | 1992 Buick Park Avenue

1 Answer

The green light keep flashing and it dont stay on


The green light on the dash flashes when the lights are off or if you have just the day time running lights on. If your lights are on the light should go out. or if a head lamp is out it may stay on

Apr 23, 2009 | 1997 Chevrolet Cavalier

1 Answer

Headlights went out & dash lights went on brighter


That can be a whole lot of things causing this but first if you have an aftermarket remote starter unhook it first to see if the problem resolves it's self,also there are fuses for the headlights check these,another thing to check is have the alternator check as one that puts out to much voltage will blow fuses and make dash lights really bright,autozone can check these for free anything over 14 volts the alternator regulater has went out .

Jan 04, 2009 | 1997 Jeep Grand Cherokee

1 Answer

1990 Jeep Wrangler Problem:


1990 Jeep Wrangler. Driving with lights on for 10 - 15 minutes. First the dash lights go out followed by the headlight and tail lights. If you pull the dimmer switch back (like you would to flash your brights at someone) the head lights will come on and as long as you continue to pull back on the dimmer switch the head lights will stay on bright.

Sep 30, 2008 | 1990 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...