Question about 2006 Hyundai Azera

Open Question

I want to replace the timing belt to my hyundai atos 2006

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 40 Answers

SOURCE: Hyundai atos 1.1 2004, 100,000 what parts must be replaced

if it has one, the timing belt should be done, along with a tune up. spark plugs air filter, fuel filter. etc

Posted on Jan 02, 2010

  • 18 Answers

SOURCE: when do you replace a timing belt on a 2005 hyundai

yup, it's mostly the same for every car, some longer, but it won't hurt to change it a bit early

che

Posted on Jul 07, 2009

drsinister69
  • 2317 Answers

SOURCE: does 2006 Sonata have a timing belt to change?

Yes, the timing belt, spark plugs and spark plug wires, fuel filter, O2 sensor/s, a transmission service too.

Posted on May 16, 2010

  • 17 Answers

SOURCE: hyundai sonata 2006. Is there a timing belt to

3.3 litre engines have a timing change.

Posted on May 19, 2010

  • 184 Answers

SOURCE: I need to know what the spark plug gap setting

2006 Hyundai Accent Gl 1.6 L4 C FI

STANDARD BKR5ES-11 GAP 044
V-POWER BRK5E-11 '' ''
G-POWER BKR5EGP ''
LASER PLATINUM PFR5N-11 ''
OE LASER IRIDIUM IFR5E-11 ''
IRIDIUM IX BKR5EIX-11 ''

DO NOT TRY AND GAP THE PLATINUM OR IRIDIUM TYPE.
I hope this engine is the same for you,if not let me know the engine code.

Posted on Apr 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai Sonata 2.4 2006 Timing chain tensioner


Watch the video. Also this engine has a timing belt not chain. You must replace the pulleys, the timing belt and the water pump when doing this service
Hyundai Timing Belt

Jul 05, 2016 | 2006 Hyundai Sonata

1 Answer

Clutch life span


should have a inspection window on tranny housing. from there u should be able to visually inspect clutch and slave cylinder/ throwout bearing

Sep 09, 2015 | 2006 Hyundai Atos 1.1

1 Answer

How do you replace the timing belt of Hyundai atos?


these cars are so simple to do but access is awkward to say the least ,Remove the starter motor and buy the correct tool to lock the crankshaft so you can undo the front pulley ,later models are a taper fit and winding the engine over with the starter motor to undo the front pulley will result in bent valves

Apr 26, 2015 | Hyundai Cars & Trucks

2 Answers

Hyundai atos has no power


Electronic diagnostic equipment will answer this quickly.
This could be related to fuel to air mixture.
The possibility is good that it is ignition and valve timing related.
It could also be a worn cam belt drive pulley (gear).
Check the condition of the cam belt drive pulley located at the bottom of the engine on the crankshaft. I have written an article previously related to this pulley wearing out and damaging the timing pick up sensor as well as throwing out igntion and valve timing. If you dont have access to electronic diagnostic equipment it might be worth your while doing this mechanical check. Remove top cam belt cover. Manually turn engine till you line up the top camshaft sprocket with the casing timing mark (tdc). Then check the position of the bottom v-belt timing mark. It should be exactly on TDC. If not, there is a cam timing issue which could be related to the cambelt drive pulley (gear).To confirm, remove the cam belt covers and check the drive pulley carefully. It will take you a couple of hours, but will help confirm this.

Jul 12, 2014 | 2006 Hyundai Atos 1.1

1 Answer

Replace cam position sensor


The Atos has a timing sensor located at the bottom of the engine by the cambelt drive sprocket (gear). The drive sprocket is bolted to the crankshaft with a timing plate. The sensor is placed next to the timing belt.There are no cam timing sensors on the cylinder head. This is a very basic engine.

Jun 10, 2014 | 2006 Hyundai Atos 1.1

1 Answer

Hyundai atos 2005 driving so slowly


have you had the OBD codes read at a garage this may help to point you in the right direction,sounds like a sensor(s)

Apr 04, 2014 | 2006 Hyundai Atos 1.1

1 Answer

Hyundai atos 2006 clutch pedal hard and gears change difficult


After replacing the clutch and adjusted the cable and you are STILL having a problem with the clutch (it is a cable clutch not a hydrolic one) have a look at where the clutch enters through the fire wall (engine side) you will see that is has probably collapsed or dented there, for some reason this is a common occurrence with the hyundai. This has happened to mine as well as my friend's atos. This is something that should not happen

Aug 04, 2013 | Cars & Trucks

1 Answer

How to disable an alarm on a Hyundai Atos


My Atos alarm cant deactivate i even changed the batteries so i cant move the car...any help please????

May 30, 2012 | 2006 Hyundai Atos 1.1

2 Answers

Hyundai atos crank sensor keeps failing


I know this post is very old, but nonetheless I hope this helps anyone else researching this problem.
The cam belt gear located on the crankshaft wears done on the inside of the gear. This causes the gear to "wobble" and hence touch the timing sensor, which damages it and results in its failure.
This wearing of the gear is by design and Hyundai should be taken to task for this. The crankshaft does not have a key between it and the gear. The crankshaft has "flattened" sides which match the gear and prevents it from "slipping" on the shaft, but with time the flattened edges of both the crank and the gear wear out and the gear wobbles slightly. This then accelerates the damage and can cause the gear to begin to cut into the aluminium engine cover and the main oil seal.
The only resolution is a new crankshaft and gear or sell the car.
I have had my battles with Hyundai and did not win, even though i could show a design fault.
I hope someone out there can take these guys to task and actually win and so create a precedence for the rest of us.

Good Luck

3_2_2013_10_57_32_pm.jpg


3_2_2013_11_00_19_pm.jpg

Mar 08, 2012 | 2006 Hyundai Atos 1.1

1 Answer

Hyundai atos 1.1 2004, 100,000 what parts must be replaced


if it has one, the timing belt should be done, along with a tune up. spark plugs air filter, fuel filter. etc

Jan 02, 2010 | Hyundai Motor 2004 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...