Question about 1994 Chevrolet Suburban

1 Answer

I need to find the brake switch to intsall an electric trailer brake controler

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

The brake light switch is located on the brake pedal lever under the dash. Here are some diagrams that will help to assist you.


i need to find the brake switch to intsall an - eee872d.jpg

2ec44c0.jpgi need to find the brake switch to intsall an - d76c8fe.gifbr />

d76c8fe.gif
i need to find the brake switch to intsall an - 6e59cf9.jpgimg src="http://i.fixya.net/uploads/images/7b445fi need to find the brake switch to intsall an - c87525f.jpg"7b445fa.jpg" class="h_mi" />



6e59cf9.jpg

c87525f.jpg

37913b6.jpg

d5cbb8a.jpg

7113df5.jpg

Posted on Jul 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you find out if you have the wires for a tow package? Trying to hook up a trailer with electrical brakes.


The wires would be secured under the rear of the truck. However trailer wiring is only for trailer lighting. Electric trailer brakes require a trailer brake controller.

Mar 06, 2011 | 1989 GMC Sierra

1 Answer

I have a 2001 F150 and am trying to find out where the factory installed plug in is for the brake controller wiring. I have the brake controller and the instructions say to read the truck owners manual...


Hi. There is a grey plug with 6 wires right behind your OBDII diagnostic port on the lower dash board above your accelerator pedal.

The color of the wires on the plug are blue, green, red, white and brown. The wires are as follows:
Blue....electric trailer brake feed
Green....brake pedal switch
Red...12v postitive...always hot
White....ground
Brown....interior vehicle illumination (not used)

The factory wire harness that you will need to attach your brake controller will plug right into this plug. The factory wires are colored the same as above.

After-market and brake conroller wires are colored as follows:
Blue....electric trailer brake feed
Red.....brake pedal switch
White....ground
Black....12v positive

Sep 01, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Hi I am installing a trailer electric brake


I belive it would be the wire that actually sends the control signal to the controller?...correct? well the if so you would need to tap into the wire casing with a test light to see which wire is lighting the test light when the brake pedal is depressed good luck

Sep 11, 2009 | 2006 Toyota Land Cruiser

1 Answer

Electric trailer brakes are kicking out due to anti-lock brakes


The ABS will shut off the trailer brakes if it detects a problem. It sounds as if the problem is in the ABS control unit, or the trailer brakes may not be grabbing hard enough causing the trailer to push the truck when you are attempting to stop. This sometimes can be corrected by adjusting the gain up on the trailer brakes.

Jun 17, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

The trailer electric brake controller does not work


i have a 2008 ford f250. when i pull my travel trailer the instrument gauge says trailer disconnected and it also says trailer wiring malfunction. then my trailer brake systems turns red and blinks. i took my ford to the dealer they said the truck is fine it is the trailer. than I took my trailer in to get looked at they said the trailer is ok and that 2008 fords have problems with the stock electric brake system what do i do

Jun 11, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

I have a 2003 chevy pick up and the electric trailer brake works when I activate the brake controller manualy, but it will not activate the trailer brakes when I step on the brake pedal. I have tested the...


If the brake conrol iis activating by manually moving the slide lever but not with the depression of the pedel the problem is no brake signal you need to have power to the red wire coming into the brake control. One of the two white wires coming from the brake switch is switched power and you could wire in there. A test light and time will fix your problem.

Mar 28, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

Trailer towing fuses


Battery junction box (BJB) fuse(s):
  • 5 (30A) (trailer electric brake controller)
  • 34 (25A) (trailer tow turn relays)
  • 42 (30A) (trailer tow parking lamps)
  • 44 (30A) (trailer tow battery charge relay switch side)
  • 63 (15A) (trailer tow reversing lamps

Mar 20, 2009 | 2008 Ford F 250 Super Duty 4WD

Not finding what you are looking for?
1994 Chevrolet Suburban Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...