Question about Chevrolet 1500

1 Answer

1990 chevy pickup 350 tbi has code 32 exhuast gas recirculation system over 8500 gvw or under 8500 gvw what do i replace or check?

Posted by on

  • packer1970 Jul 04, 2010

    yes it was very helpfull thanks

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Hi:
Check Recirculation Lines from the Evaporater Canister to the Exhaust.Make sure your canister Lines are not Cracked or Loose .Normaly you have enough line that you can Cut-IT about 2 inches back on put it Back On. Also Check for Any Exhaustleaks in your Exhaust System.
Hope this Helps you. PO 32 is a Code Does'nt Sound Right. PO440-PO442 is an Emission /Recirculation Problem.O2 Sensors Ect !
Thanks for Using FIXYA from d_hubbs

Posted on Jul 04, 2010

  • packer1970 Jul 04, 2010

    the code i got it off the truck by doing a self diagnostic with key on engine off and it blinked 3 times then 2times thats how i got it was that the wrong way to check it?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 chev k2500 350 tbi vacuum hose routing


Here are 2 routing one is for under 8500 one is for over 85002_27_2012_12_13_19_am.gif2_27_2012_12_14_01_am.gif

Feb 26, 2012 | Chevrolet 2500 Cars & Trucks

1 Answer

1995 chevy silverado 350 TBI V8 standard powerloss


have you checked the filter, i know you state the fuel lines are clear though. likely fuel injectors have lost flow. the TBI injectors can be cleaned, but i usually just replace them. but check them using a timing light hooked to the coil wire for timing of each injector spray. the pattern under the light should be even and conical shape, no major spatter. if one shows low volume, the other one should be replaced at same time, it will save you having to change it when you put brand new next to old one a have same problem again. only replace with brand new, i've had 7 bad remanufactured injectors on one truck at one point in time, only replace with new!

Jul 08, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

My 1990 350 tbi will not start. the fuel is getting all the way to the fuel injecters but wont come out


Make sure you are getting power to the injectors. I have the same,350 tbi. Check the fuses and relays and check the wires at the tbi to make sure one of them is not rubbed through. The injectors have to be getting intermitent power .

Mar 09, 2010 | 1990 Chevrolet K1500

1 Answer

1998 Chevy Truck 1/2 ton 350 engine. Trouble codes P0404, P0405 and P1404. I replaced the EGR valve. Now I get t/c P0404 and P0405. Now what should I check?


404 is exhaust gas recirculation circuit, and 405 is exhaust gas recirculation sensor circuit low. EGR sensor or ground?

Nov 13, 2009 | 1999 Chevrolet Silverado 1500

6 Answers

90 chevy 350 with TBI starts but wont stay running changed fuel filter and fuel regulator dont know what next


I have a 90 chevy k1500 350 tbi with same problem! I have traced problem to... after turning on key fuel pump kicks on when u crank it over injectors shoot gas and truck starts! After few seconds injectors stop spraying and truck dies! This can happen many times over and over! Eventually sometimes truck stays running and all is great! I changed ignition module, oil pressure sending unit (which i was told controls gas after vehicle is running) fuel filter, computer, fuel pump relay, I am at a loss now! Hope this helps and hope someone can help me!

Aug 10, 2009 | Chevrolet C1500 Cars & Trucks

1 Answer

I need to find out what colors go to what post onto the starter


most of the time all big hole wires go to the big post whitch would be battery an hot leads.the smaller wire sould go to the s post closer to the block. s stands for start.. GOOD LUCK

May 26, 2009 | 1988 Chevrolet S-10

2 Answers

1990 chevy camaro with a rebuilt 350 Tbi


fuel pressure isnt right.. need to get a fuel pressure regulator so you can regulate the gas flow..

Apr 21, 2009 | 1990 Chevrolet Camaro

2 Answers

93 chevy c1500 pickup 350 moter


Its mounted on the passenger side of the intake next to the TBI

Oct 22, 2008 | 1993 Chevrolet K1500

2 Answers

1990 chevrolet 1500 pickup starts hard when cold


Most likely the coolant temperature sensor for the vehicle computer. Secondly, could be the tps sensor "throttle position sensor" not registering correctly or perhaps lots of other things but most likely the coolant temp sensor.
Dale

Oct 21, 2008 | 1990 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...