Question about 1987 Nissan Sentra Wagon
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are many online wiring diagram solutions, but the cheapest way to find your diagram is to purchase a haynes or chilton manual from the local auto parts store. Both have excellent wiring, fuel lines, brakelines, etc diagrams. I prefer the Haynes manual myself.
Posted on Jul 30, 2008
I had this question initially. However, the Nissan Sentra (starting in 2007) has an electric Power Steering. It DOES NOT need any power steering fluid. The electric power steering is suppose to give you better fuel efficiency and lower maintenance cost.
Posted on Feb 28, 2009
I have the same car and had the check engine light come on for me as well.
Mine was because I put an after market cold air intake system and I took care of my filter by cleaning and replacing it when needed. If you have this or an a filter like a K&M air filter that has a bit of oil on it will coat on the O2 sensors and will eventually interfere with your O2 sensors giving your computer the wrong information like mine did and my revs went up as well. So I had to clean my 02 sensors and and reset my computer it fixes the problem or replacing the 02 sensors will of course work too but not needed. About 3-4 years then the check engine light came back on again and I went back to my normal stocked air intake and a regular filter and no more problems. I left my exhaust header on and I still have lots of power and fuel milage, so the cold air intake didn't icrease much power or fule milage... just a tad.
Hope this helps you a little.
The other J!
Posted on Aug 03, 2009
well the temperature control gage is connected to the engine block and consists of 1 wire for the reading of the motor heat either the sensor is going bad or you need to check your coolant levels in the radiator make sure the engine is cool before opening the thermostat cap to the radiator so not to get burnt ...also make sure the wire itself is not grounding out on the engine block to give the gage to give such a readout look to the engine and usually on the drivers side lower the plug wires you should see a plug with a wire coming from it ensure the wire is not rubbing on anything .
Posted on Oct 02, 2009
Tips for a great answer:
Jan 27, 2013 | 1987 Nissan Pickup
Sep 14, 2010 | 1997 Nissan Pickup
Dec 11, 2009 | 2001 Nissan Sentra
Nov 09, 2009 | 1987 Nissan Sentra Wagon
Mar 09, 2009 | 1987 Nissan Sentra Wagon
Mar 06, 2009 | 1987 Nissan Sentra Wagon
Feb 13, 2009 | 1987 Toyota MR2
Jul 22, 2008 | 1994 Nissan Sentra 4-Door
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: